claber 8061 Aqua-Magic Tank Instruction Manual
- June 12, 2024
- claber
Table of Contents
AQUA-MAGIC TANK
User manual
PACKAGE CONTENTS.
a) Handles with couplings
d) Panel with grips
b) Base legs with couplings
e) Floor stands for base legs
c) Cap with screws and foot
f) PVC tank sack
ASSEMBLY. Cross the two base legs and fix them in place by threading the
cap into the foot through the hole in the legs and tightening using the nut
supplied. Thread the handles through the two side loops on the PVC tank sack.
Attach the handles to the base legs and fix by tightening the couplings.
Attach the floor stands to the base legs.
ASSEMBLY. Clip the grips on the panel onto the two handles. Fit the Aqua-
Magic timer (not supplied) to the panel, sliding it along until it locks in
place.
To release, press gently on the tab and slide it in the opposite direction.
Connect the water supply following the instructions given in the timer
instruction leaflet.
FILLING AND USE. To fill the PVC tank sack, lift up the central hole cover and pour in the water using a watering can. The Aqua-Magic timer uses the water it needs for the drip-irrigation system to operate.
Per Aqua-Magic Tank (codice): – For Aqua-Magic Tank (code): – Pour Aqua-Magic Tank (code):