GRACO 04532-111 Wilfred 5-in-1 Convertible Crib Instruction Manual

WILFRED CONVERTIBLE CRIB

Model / 04532-11 -KM COLOR

www.jpma.org

Sample tested to meet U.S. Federal, ASTM and other safety requirements
Made in China

04532-111 Wilfred 5-in-1 Convertible Crib

Adult assembly required. Small parts may present choking hazard prior to assembly.
Enclosed please find the simple step-by-step instructions to help you quickly assemble your product. Before you begin we recommend that you follow the steps below:

1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools: Philips Head screw driver, Flat head screw driver, Hammer.

Do Not Use Power Drills or Drivers
Keep these instructions for future use.
To protect your parts during assembly please place them on a soft surface. To clean surface use only water on a damp cloth. Do not use window cleaners or cleaning abrasives as it will scratch the surface and could damage the protective coating.
To register your product for important safety alerts and updates to your product please visit www.storkcraft.com and click on Product Registration.

NEED PRODUCT SUPPORT?

Our Customer Care team is here for you.
If you have any questions about assembling your product, or have any concerns relating to parts, shipping, or your new product, get in touch with our Customer Care team first and they will be happy to let you know what to do next We’re available Monday to Friday, from 6:30 am – 4:00pm PST / 9:30 am – 7:00 pm EST.
Please have the following product information ready, located on the white sticker label on your product: Model number | PO number | Date of manufacture

Here are a few easy ways to contact us:

• Online at www.storkcraftdirect.com via our live chat
• Email us at [email protected]
• Call us toll-free in North America at 1.877.274.0277

We look forward to hearing from you.

**** WARNING

Failure to follow these warnings and the assembly instructions could result in serious injury or death.

• Read all instructions before assembling the crib. KEEP INSTRUCTIONS FOR FUTURE USE.
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
• The mattress used in this crib should not be more than 6 inches (15cm) thick and should be of such length and width that the gap between the mattress and the sides of the crib is not more than 1 3/16 inches (3cm) when the mattress is pushed into the corner of the crib.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use the crib if any parts are missing, damaged or broken. Contact Stork Craft for replacement parts and instructional literature if needed. DO NOT substitute parts.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
• DO NOT use a water mattress with this crib.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• If re-finishing, use non-toxic finish specified for children’s products.
• DO NOT use this crib if the attached or enclosed instructions cannot be strictly adhered to.
• Follow warnings on all products in a crib.

STRANGULATION HAZARD

• Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or toddler bed for any reason or attach strings to toys.
• To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib near window where cords from blinds or drapes may strangle a child.

FALL HAZARD

• When child is able to pull up to standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out.
• Stop using crib when child begins to climb out or reaches the height of 35 inches (89 cm)

CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 INCHES BY 51 5/8 INCHES (69 CM X 131 CM) WITH A THICKNESS. NOT EXCEEDING 6 INCHES (15 CM) AND THE MINIMUM MATTRESS THICKNESS OF 4 INCHES (10 CM). THIS PRODUCT CONFORMS TO APPLICABLE REGULATIONS PROMULGATED BY THE CONSUMER PRODUCT SAFETY COMMISSION.

Identifying the parts

PARTS ENCLOSED IN CARTON
PARTS LIST

The optional UNIVERSAL TODDLER SAFETY GUARDRAIL KIT-SLAT is available for separate purchase from authorized Graco online retailers.

Identifying the parts
HARDWARE AND TOOL DIAGRAM/QUINCAILLERIE INCLUSE/
THIS PRODUCT USES IMPERIAL THREADED HARDWARE/

ASSEMBLY INSTRUCTIONS **

**

After assembly Tighten bolts firmly and retighten periodically Spring shown here in Lowest position.
NOTE: We recommend setting the spring in the highest position for newborn babies.
Lower the mattress spring as the child grows and becomes more mobile.

TO CONVERT TO A TODDLER
WARNING

Failure to follow these warnings and the assembly instructions could result in serious injury or death.

• DO NOT place bed near windows where cord from blinds or drapes may strangle a child.
• Child must be at least 15 months old and not more than 50 lbs. to use this bed.
• Use a full size crib mattress as specified for this bed
• The mattress used in this bed must have a minimum dimension of 51 5/8″ x 27 1/4″ x 4″ and a maximum of 6″ thick.
• Do not place items with a string, cord, or ribbon around a child’s neck, such as hood strings or pacifier cords
• Do not suspend strings over a toddler bed for any reason

OPTIONAL TODDLER RAIL

The optional UNIVERSAL TODDLER SAFETY GUARDRAIL KIT-SLAT is available for separate purchase from authorized Graco online retailers.

Safety rail can be assembled on either end, or both if desired.

THIS PRODUCT USES IMPERIAL THREADED HARDWARE

Convert Crib To A Full Size Bed

You have the option to convert the crib to a full size bed. Simply disassemble the crib to get the headboard components shown below. Attach it to a full size metal bed frame (NOT INCLUDED) to convert to a full size bed.

STORKCRAFT LIMITED WARRANTY

STORAGE AND CARE
DO NOT remove any part that is attached with wood screws, The stationary side rail, mattress base can all be disassembled for storage. Simply review the assembly instructions for each and reverse the order to disassemble. Wipe all parts with a dampened clean cloth.
DO NOT use abrasives. To convert to a double bed please follow the instructions in the double bed kit. (MUST BE PURCHASED SEPARATELY)

LIMITED ONE YEAR WARRANTY
This one (1) year Limited Warranty (“Warranty”) is a voluntary manufacturer’s warranty. This Warranty supplies consumers with rights separate to those rights provided by applicable consumer law, including, but not limited to those applicable consumer laws relating to non-conforming goods. Accordingly, this Warranty shall not, in any way, limit, suspend, enlarge, nor restrict any rights provided by applicable law to any consumer. Notwithstanding any other terms, or conditions in this Warranty, all claims made under this Warranty shall be governed by the terms and conditions set forth in this Warranty document.

NOTE THAT BY USING YOUR STORKCRAFT PRODUCT YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS WARRANTY. IF YOU DO NOT AGREE WITH THE TERMS OF THIS WARRANTY, THEN DO NOT USE THIS STORKCRAFT PRODUCT AND CONTACT STORKCRAFT’S CUSTOMER CARE DEPARTMENT.

I. WARRANTY LIMITATIONS AND TIME PERIOD:

Stork craft Manufacturing Inc. warrants this product against defects in the materials and workmanship of the same, when used normally by consumer pursuant to Stork craft’s Guidelines (as defined), for a period of one (1) year from the date of the original retail purchase (such to be the “Warranty Period”). Stork craft’s Guidelines include, but are not limited to product technical specifications, product or user manuals, product service announcements and communications (printed or circulated). Prior to any consumer receiving any benefits under this Warranty, Stork craft and/or its agents may: (a) demand the production of proof of purchase by the consumer; (b) require consumer to follow additional instructions or procedures to obtain benefits under this Warranty; and/or (c) require consumer to answer questions or verify product information (including, but not limited to requests for photographs).

II. WARRANTY SERVICE:
Stork craft will replace parts or products, at its sole option, from any defective product. Service under this Warranty shall be rendered in the manner deemed appropriate by Stork craft in its own judgment, and Stork craft may, at its sole discretion, require consumer to mail or ship items or products. Stork craft may supply consumer with parts or hardware for consumer’s own/do-it- yourself (“DIY”) installation. DIY parts and hardware will only be shipped within the Continental United States or Canada, pursuant to all applicable laws and regulations.
Customers outside of these areas may be subject to additional shipping charges. Stork craft shall not be responsible for labor or other costs incurred by consumer in connection with DIY installations. Notwithstanding the foregoing, Stork craft reserves the right to: (a) change the method by which Stork craft will accept consumer repair or replacement requests under this Warranty; (b) limit, modify, restrict, or enlarge consumer rights based on applicable law; (c) charge shipping, handling, or other charges in connection with supplied parts or hardware; and/or (d) require the return of defective products, parts, or hardware. Stork craft may replace any parts or hardware with similar and/or equal quality parts or hardware.

III. LIMITATIONS ON LIABILITY:
Except as provided for in this Warranty, and only to the maximum extent permitted by applicable law, Stork craft shall not be responsible for direct, special, incidental, or consequential damages that may result from, or which flow from, any breach of warranty or condition, and/or that may be asserted using any legal theory. This Warranty is specifically disclaimed to second- hand purchasers of any products.
This Warranty shall further not apply in instances of product abuse, product misuse, product neglect, commercial use of such products, or due to accidental damage and/or natural forces. The foregoing limitations shall be modified or removed in any state, country, or province that does not permit such limitations (and only to the minimum extent that such are prohibited by law).

IV. GENERAL TERMS:
If any term or condition of this Warranty is deemed to be illegal or unenforceable, then the legality and enforceability of the other terms and conditions of this Warranty shall be unaffected. No agent, employee, reseller, nor other individual or company shall be permitted without specific written authorization to modify or otherwise change this Warranty. This Warranty shall be construed and governed by the laws of the country, state, or province where the subject purchase of the product occurred.

V. PROCEDURE FOR OBTAINING
WARRANTY SERVICE:
Consumer may obtain Warranty Service by contacting Stork craft’s Customer Care department through the channels listed below.
Stork craft Website: www.storkcraftdirect.com
Email: [email protected]
Phone Toll Free: 1-877-274-0277
Hours of Operation: 6:30 am – 4:00 pm PST / 9:30 am- 7:00 pm EST – Mon to Fri

Distributed by
Stork craft Manufacturing Inc. 3993 Howard Hughes Parkway, Unit# 250 Las Vegas, NV, USA. 89169
T: 1 877 274 0277 | E: [email protected] | Twitter @Storkcraft

©2022 Graco Children’s Products
GRACO is a trademark of Graco
Children’s Products Inc., used under license.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>