TCP Smart SMAWMOODLIGHTMK1PK Smart Mood Light Instructions
- June 12, 2024
- TCP Smart
Table of Contents
**TCP Smart SMAWMOODLIGHTMK1PK Smart Mood Light Instructions
**
Specifications
Dimensions: 100 x 100 x 188 mm
Kelvins: RGBIC 16 million colours
Lifetime: 25,000 hours
Wattage: 5W
Input: DC5V 1A
Frequency: ~50-60Hz
IP Rating: IP20. Indoor use only
WiFi: 2.4 GHz
Warranty: 2 Year Warranty
Material: ABS
Cautions & Warnings:
The light bars are not waterproof and are suitable for indoor use only.
The working temperature range is between -10°C to 40°C. Do not install the
light bars near heat sources. Avoid installing the light bars near potentially
dangerous sources such as candles and liquid filled objects. The light source
of the light bar is not replaceable. When the light source reaches its end of
life, the entire product should be replaced.
These light bars are not compatible with dimmer switches
The manufacturer provides warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 1 year, starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service centre. When making a claim under the warranty, the original bill of purchase (with purchase date) must be submitted. The warranty will not apply in cases of:
Normal wear and tear. Use of force, damage caused by external influences. Misuse e.g. connection to an unsuitable mains supply. Partially or completely dismantled appliances.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical &Electronic Equipment)This marking shown on the product indicate that it should not be disposed with other household wastes at the end of it is working life
Please separate from other types of waste and recycle responsibly. If in doubt, please contact your local recycling centre for details of where and how this item can be safely recycled.
We are social, check us out!
Youtube.com/c/TCPSmart
@tcpsmart
Smart Mood Light – SMAWMOODLIGHTMK1PK
Functions
Top button
Use to turn the mood light on and off. Short press to turn on and long press
to turn off. Use to switch between mood scenes.
Front button
Use to enter pairing mode – see below. If you accidentally start the Wi-Fi
pairing mode the light will stop flashing after 3 minutes if no action is
taken. Use to switch between music modes.
TCP hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU and 2011/65/EU. Full declaration can be viewed at tcpi.eu.
App Install Instructions:
01. Download the TCP Smart App from the App Store or Google Play.
Log in or set up an account using the on screen prompts.
02. Use the add device button in the top right corner
03. The add device menu should pop up automatically.
04. Enter the network details if prompted.
05. Wait for the device to add.
06. Once the device has been added continue to the next screen.
07. A device can be linked to the room where it is located.
Smart Home Assistant
TCP Smart products work with Amzon Alexa, Google Nest & Siri Shortcuts.
For futher information on connecting to smart home assistants visit
https://www.tcpsmart.eu/faq/
-
Scenes – Choose from the many preset scenes.
-
Music – Use the built in microphone to sync with sounds.
-
Different modes interact with the music in different ways.
-
Customise each mode by changing the sensitivity settings.
-
Colour Static – Create your own static light patterns.
-
Use the allbutton to select all pixels and select a colour from the pallet.
-
Individual pixels can be selected to create different patterns
-
Colour Dynamic – Create your own dynamic light patterns.
-
Add colours by pressing the + symbol. Select a colour and change it using the wheel.
-
Choose from the differentlighting effects to add movement.
-
The speed can be changed for the different effects on the slider.
-
Press preview to see the effects on the mood light. Save to complete.
-
All saved DIY colours effectscan now be accessed in the SCENE tab.
-
Timer – Schedules can be set in the TIMER tab.
-
Press ADD to set up a schedule and follow the on screen prompts.
-
Settings menu
a. Device information is stored here and can be used if help is needed.
b. Any automated tasks will be saved here
c. Devices can be shared with other accounts, click the add sharing
c. Follow the on screen prompts to enter the needed details
d. Devices can be controlled asa group. Groups can be set up here
e. FAQ’s check here for frequently asked questions.
f. Add a shortcut to your home screen for this device. Follow the on screen prompts.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>