Netgear GS724T ProSafe 24-Port Gigabit Switch Specifications And Datasheet
- June 12, 2024
- NETGEAR
Table of Contents
Netgear GS724T ProSafe 24-Port Gigabit Switch
Introduction
Management at an Unmanaged Price
Joining NETGEAR’s family of Smart Switches with simple switch management at no
extra cost, this 24-port Gigabit switch is high in value and capability. With
24 10/100/1000 Mbps ports, each capable of powering 2000 Mbps of data
throughput in full-duplex mode, plus two optional fiber ports, it provides a
fast backbone and connects servers or power users, delivering large amounts of
multimedia, image, and video information in no time at all. Ideal for
combining 10, 100, and 1000 Mbps devices it delivers 10/100/1000 automatic
speed and full/half-duplex sensing plus Auto Uplink™ on every port. Two hot-
swappable Small Form factor Pluggable (SFP)** GBIC slots provide optional
fiber connectivity for greater distances.
In addition, an intuitive, Web-browser interface offers simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. Alternatively, use SNMP-based software to manage your Smart Switch. Shipped ready for use straight out of the box, it delivers switching that’s easy to set up and use. NETGEAR ProSafe Smart Switches are ideal for adding basic management to your unmanaged networks and extending your managed networks.
High Powered
Twenty-four 10/100/1000 ports deliver non-blocking, full-speed packet
forwarding with 48 Gbps bandwidth migrating your network to future-proof
functionality. Two SFP GBIC fiber slots provide optional fiber connectivity
for greater distances.
Intelligent
Smart Switch capability enables key management features for the value price
of an unmanaged switch. Included are performance monitoring, port
configuration, VLAN for traffic control, port trunking for increased
bandwidth, and Class of Service (CoS) for traffic prioritization.
Right Sized
Ideal for growing businesses that want the benefits of management without
the cost and complexity of traditional managed switches.
Easygoing and Durable
Simple to set up and simple to use for effortless network monitoring and
troubleshooting. Made to last, this sturdy switch is housed in a 17-inch metal
box and comes with a rack mounting kit. **Use with NETGEAR ProSafe AGM731F
1000BASE-SX SFP GBIC module, ProSafe AGM732F 1000BASE-LX SFP GBIC module or
ProSafe AGM733 1000BASE-ZX SFP GBIC.
Connection
Product Specifications
- Network Protocol and Standards Compatibility
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- IEEE 802.3x full-duplex flow control
- Interfaces
- 24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports)
- 2 SFP slots for fiber Gigabit Ethernet modules
- Administrative Switch Management
- IEEE 802.1D Spanning Tree Protocol
- RFC 1157 SNMP v1
- RFC 1213 MIB II
- RFC 1643 Ethernet Interface MIB
- RFC1493 Bridge MIB
- Jumbo Frame Support (up to 9216 bytes)
- IEEE 802.1Q Tag VLAN (up to 64 Static VLAN groups)
- Port-based VLAN (up to 24 groups)
- IEEE 802.1p (Class of Service)
- Port-based QoS (options High/Normal)
- Port Trunking – Manual as per IEEE802.3ad Link Aggregation
- DHCP client function
- Port setting
- Web-based configuration, anywhere on the network
- Smartwizard Discovery Utility program auto-discovers devices (up to 254 agents/switches); sets system configuration to each agent
- Configuration Backup/Restore (easy to configure more than one switch)
- Password access control and Restricted IP Access List
- Firmware upgradeable
- Active Flow Control
- Half-duplex back-pressure control
- Full-duplex IEEE 802.3x pause frame flow control
- Performance Specifications
- Forwarding modes: Store-and-forward
- Bandwidth: 48 Gbps
- Network latency: Less than 20 µs for 64-byte frames in store-and-forward mode for100 Mbps to 100 Mbps transmission
- Buffer memory: 256 KB embedded memory per unit
- Address database size: 8,000 media access control (MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean Time Between Failure (MTBF): 115,221 hours (~ 13 years)
- LEDs
- Unit: power
- Per port: link, activity, speed, duplex
- Power Supply
- Power Consumption: 29 W maximum
- 100-240VAC/50-60 Hz universal input
- Physical Specifications
- Dimensions (H x W x D): 1.7 x 17.3 x 8.1 in. (43 x 440 x 205 mm)
- Weight: 5.9 lbs. (2.7 kg)
- Environmental Specifications
- Operating temperature: 32 to 104°F (0 to 40° C)
- Storage temperature: -4 to 158°F (-20 to 70°C)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 10,000 ft (3,000 m) maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
- Electromagnetic Compliance
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22)
- EN 55024 (CISPR 24)
- C-Tick
- Safety Agency Approvals
- UL listed (UL 1950)/cUL
- IEC950/EN60950
- CE mark, commercial
- CUL 60950 (Listed)/EN60950 (Low Voltage Directive)
- Warranty
- Switch: NETGEAR 5-year warranty
System Requirements
- Category 5 network cables
- Network card for each PC
- Network software (e.g., Windows®)
Package Contents
- 24-port Gigabit Smart Switch GS724T
- Rubber footpads
- Power cord
- Rack-mount kit
- Smart Switch Resource CD
- Smart Switch Installation Guide
- Warranty/Support information card
Modules
- NETGEAR AGM731F 1000BASE-SX SFP GBIC Module with LC connectors for 50um or 62.5um multi-mode fiber cable
- NETGEAR AGM732F Fiber 1000BASE-LX SFP GBIC Module with LC connectors for 9um single-mode fiber cable
- NETGEAR AGM733 ProSafe 1000BASE-ZX Fiber SFP GBIC Module
NETGEAR Related Products
Accessories
- ProSafe GBIC Module 1000BASE-SX Fiber Model AGM731F
- ProSafe GBIC Module 1000BASE-LX Fiber Model AGM732F
- ProSafe GBIC Module 1000BASE-ZX Fiber Model AGM733
- Layer 2 Support Pack P3L21– 1 year
- Layer 2 Support Pack P3L21– 3 year
- 32-bit Gigabit PCI Adapter Model GA311
- Gigabit PC Card Adapter Model GA511
Solutions:
- ProSafe 802.11g Wireless Access Point WG302
- ProSafe 802.11g Wireless Access Point WG102
- ProSafe VPN Firewall 25 with 4 Gigabit Port and Dual WAN Port Switch FVG124G
- ProSafe VPN Firewall 8 with 4- port 10/100 and Dual WAN Port Switch FVS114
Optional Switches:
- ProSafe 16 Port Gigabit Smart Switch Model GS716T
- ProSafe 48 Port Gigabit Smart Switch Model GS748T
Support
- Address: 4500 Great America Parkway Santa Clara, CA 95054 USA
- Phone: 1-888-NETGEAR
- E-mail: info@NETGEAR.com
- Website: www.NETGEAR.com
- Help: Help is there when you need it! NETGEAR provides 24×7 technical support* in English, with selected local language support during office hours.
Trademarks
©2005 NETGEAR, Inc. NETGEAR®, Everybody’s connecting®, the Netgear logo, Auto Uplink, ProSafe, Smart Wizard, and RangeMax are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Microsoft, Windows, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved. * Free basic installation support is provided for 90 days from date of purchase. Advanced product features and configurations are not included in free basic installation support; optional premium support is available.
FAQ’s
How many ports does the Netgear GS724T ProSafe switch have?
The Netgear GS724T ProSafe switch has a total of 24 ports.
What type of ports are available on the GS724T switch?
The Netgear GS724T ProSafe switch features 24 Gigabit Ethernet ports.
Is the GS724T switch a managed switch?
Yes, the Netgear GS724T ProSafe switch is a managed switch, offering advanced configuration and monitoring capabilities.
Does the GS724T switch support Power over Ethernet (PoE)?
No, the Netgear GS724T ProSafe switch does not support Power over Ethernet (PoE). It provides standard Ethernet connectivity.
What is the switching capacity of the GS724T switch?
The Netgear GS724T ProSafe switch has a switching capacity of 48 Gbps.
Does the GS724T switch support VLANs?
Yes, the Netgear GS724T ProSafe switch supports VLAN (Virtual Local Area Network) functionality, allowing for network segmentation and improved security.
Can the GS724T switch be managed remotely?
Yes, the Netgear GS724T ProSafe switch supports remote management through web- based interfaces or command-line interfaces (CLI).
Does the GS724T switch support link aggregation?
Yes, the Netgear GS724T ProSafe switch supports link aggregation, allowing you to combine multiple ports to increase bandwidth and provide redundancy.
What are the supported Layer 2 features on the GS724T switch?
The Netgear GS724T ProSafe switch supports various Layer 2 features, including Spanning Tree Protocol (STP), Quality of Service (QoS), and Port Mirroring.
Does the GS724T switch have a fan for cooling?
Yes, the Netgear GS724T ProSafe switch is equipped with a built-in fan for cooling to maintain optimal operating temperatures.
Is the GS724T switch rack-mountable?
Yes, the Netgear GS724T ProSafe switch is rack-mountable, allowing for convenient installation in standard network racks.
What is the warranty period for the GS724T switch?
The Netgear GS724T ProSafe switch typically comes with a limited lifetime warranty from Netgear.
Download This PDF Link:Netgear GS724T Gigabit Switch – Device.report