anko X1 Dinosaur Neon Sign Night Light Instructions
- June 12, 2024
- Anko
Table of Contents
DINO NEON LIGHT
Contents:
A. B.
Dino Light X1 Battery Box X 1
Instructions
Step 1. Install batteries (not supplied) before use, ensuring that the
polarisation on the batteries is correct.
Step 2. Insert the Dino light into the base as shown in the image below.
Light is connected correctly when you hear a click.
Step 3. Turn on/off the light switch to operate.
Warnings:
Battery information: Require 3 x 1.5V AA batteries (not included)
BATTERY INSTALLATION BY ADULT IS REQUIRED
OPERATING AND CARE INSTRUCTIONS
– INDOOR USE ONLY
– NEVER MIX DIFFERENT TYPES OR OLD AND NEW BATTERIES
– DO NOT SHORT CIRCUIT SUPPLY TERMINALS OR DISPOSE OF BATTERIES IN FIRE
– REMOVE BATTERIES DURING LONG PERIOD OF NON-USE
– BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY (+ AND -).
Instructions:
-
Please read this product manual carefully.
-
Read all warnings and follow all instructions in this product manual.
-
Use only a microfiber and dry cloth for cleaning the product,
-
Operate carefully to not cause any damage by dropping or physical shocking it
-
Do not leave the product in excessive heat, high temperatures can cause the product to
malfunction. -
The light source of this luminaire is not replaceable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>