globe 91002869 Light Matte Brass LED Integrated Plug In or Hardwire Wall Sconce Instructions

globe 91002869 Light Matte Brass LED Integrated Plug-In or Hardwire Wall

Sconce

Thank you for selecting Globe as your lighting choice for your home. With proper care, this product will provide years of pleasure and enjoyment. Carofully follow the inctructions in ordor to oncuro that this product functions cafoly and pronerly for wears to come

LED INTEGRATED PLUG-IN WALL SCONCE

FOR YOUR SAFETY

• Most electrical accidents are caused by carelessness or ignorance.
• If you combine a basic knowledge of electricity, a healthy respect for it, and a dose of common sense, you can safely tackle many household electrical repairs. Here are some basic guidelines for working with electricity
• Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls that circuit.
• Tape a sign to the panel warning others to leave the circuit alone while you work.
• Before touching any wire, use a voltage tester to make sure it’s not live. Whenever you check for voltage in a receptacle, check both outlets – each may be controlled by aseparate wiring circuit.
• When replacing fuses, turn off the main power first.
• Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a a complete circuit through your chest.
• Touch a plug fuse only by its insulated rim.
• Remove cartridge fuses with a fuse puller.
• Use tools with insulated handles and ladders made of wood or fiberglass.
• Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
• Never disable grounding devices. Make sure that allappliances requiring grounding are properly grounded, and that the electrical system itself is properly grounded. Meet or exceed all electrical code requirements that cover the work you are doing.
• Always work with enough light to see what you are doing it’s easy to make mistakes when you’re working in dim light.
• When in doubtabout the safety of any electrical repair or test, call in a professional.

CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, If not Installed and used In accordance with the Instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the Interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RESPONSIBLE PARTY Globe Electric

2264 East 6th Street San Bernardino, CA 92410 www.globe-electric.com

Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service unparalleled in the industry. Should you encounter any difficulties, have any questions or simply wish to offer us your valuable feedback, you may contact us in the following ways:

• Toll-Free Telephone: 1-888-543-1388 (North America Only)
• Toll-Free Fax: 1-800-668-4562 (North America Only)
• E-Mail: info@globe-electric.com 
• Mail : Globe Electric Customer Service Department 150 Oneida, Montreal, Quebec, Canada H9R 1A8
  NOTE : Please visit our website to discover other quality Globe products: http://www.globe-electric.com

PRE-INSTALLATION

ELECTRICAL INSTALLATION

1. Place the wall switch in the “OFF” position. Depending on which type of fuse box you have in your home:
2. Place either the main (Master) switch in the “OFF” position, cutting off power to your entire home, OR turn off the individual switch that provides power to where the fixture will be installed. OR
3. Place either the main (Master) switch in the “OFF” position, cutting off power to the entire home OR unscrew the fuse that provides power to where the fixture will be installed

NOTE : Shutting off a wall switch that controls the light is not sufficient to prevent electrical shock.

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

PLUG-IN

HARDWIRE

PACKAGE CONTENTS

PLUG-IN INSTALLATION

1. MOUNTING THE CANOPY :
   Place the back plate on the wall. Mark the location for the anchors. Use a drill to make the holes. Insert the anchors into the wall. Secure the back plate onto the wall by screwing the mounting screws into the anchors. Secure fixture onto back plate with canopy screws.

2. ADJUST CORD LENGTH (OPTIONAL):
   The cord length between the plug and the canopy should be at least 6ft (182.8cm). Slide the plug cap off of the cord plug as shown in image below. Cut the cord to desired length. Re-attach cord to cord plug by inserting the cord back into the cord plug and pressing down firmly. Insert cord into the plug by making sure the ribbed side (A) of the wire is pressed firmly onto the pin of the wider blade (B). Secure the cord by sliding the plug cap back onto the cord plug.

Consult a qualified licensed electrician to ensure all wires connect to the correct polarity.

HARDWIRE INSTALLATION

1. REMOVE THE CORD:
   Remove back plate by unscrewing canopy screws. Unwire the black  and white wire from cord (making sure to keep the switch on the black  wire connected/intact). Slide cord out through hole and remove.

2. INSTALL MOUNTING BRACKET:
   Install mounting bracket to inside of canopy by securing with canopy screws.

3. CONNECTING THE WIRES:
   Cord length between the wire connectors and the canopy should be at least 6″ (152.4mm). If needed, strip plastic coating from the white and black wire approximately 0.6″ (1.5 cm) to expose metal wire inside.

   • Wrap the ground wire from the outlet box around the ground screw on the mounting crossbar. Use a wire connector to connect the ground wire from the fixture to the ground wire from the outlet box.
   • Use a wire connector to connect the white wire from the fixture to the white wire (neutral wire) from the outlet box.
   • Use a wire connector to connect the black wire from the fixture to the black wire (live wire) from the outlet box.
   • Wrap the three wire connections with electrical tape for a more secure connection.
   • Position the wires back inside the outlet box.

4. ATTACHING THE CANOPY:
   Position the canopy over the junction box and secure with outlet box screws.

5. ATTACHING THE NUT:
   Use nut to insert in the original outlet hole in canopy.

WARNING : consult a qualified licensed electrician who will ensure the fixture is installed in accordance with local installation codes.

MODEL : 65934

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>