New Direction Tackle TH9S Anti Theft Alarm User Manual

June 12, 2024
New Direction Tackle

New Direction Tackle TH9S Anti Theft Alarm

TH9s ANTI-THEFT ALARM OVERVIEW

Th9s Anti-theft Alarm

T1. Power On(Off)
Left: Remote control mode (Silent mode)
Middle: OFF
Right: Remote control mode
T2. Infrared sensor
T3. LEDs
T4. Halo for low power
TS. Turn On/Off LEDs hold press: turn off anti-theft function
T6. CR2*2
T7. High Quality Cone Speaker

TH9s ANTI-THEFT ALARM R9s Receiver HOW TO REGISTER ANTI-THEFT ALARM TH9s

  1. Turn on the R9s receiver.

  2. Press the multi-function button on the receiver down and hold it to enter system menu.

  3. Scroll down and choose “Register Alarm” menu.

  4. Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3, A-EFT CHA4). We recommend to start with A-EFT CHA1. Press the button down to select the channel.

  5. Turn on the TH9s Anti-Theft Alarm.

  6. Press the right button on the TH9s twice.

  7. Registration was successful when the display shows “SUCCESS”.

S9r Receiver HOW TO REGISTER ANTI-THEFT ALARM TH9s

  1. Turn on the S9r receiver.

  2. Press the multi-function button on the receiver down and hold it to enter system menu.

  3. Scroll down and choose “Register Alarm” menu
    S9r Receiver HOW TO REGISTER ANTI-THEFT ALARM TH9s
    4. Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3, A-EFT CHA4). We recommend to start with A-EFT CHA1. Press the button down to select the channel.
    S9r Receiver HOW TO REGISTER ANTI-THEFT ALARM TH9s

  4. Turn on the TH9s Anti-Theft Alarm.

  5. Press the right button on the TH9s twice.

  6. Registration was successful when the display shows “SUCCESS”.

B10 Smart Bite Watch HOW TO REGISTER ANTI-THEFT ALARM TH9s

  1. Turn on the B10 Smart Bite Watch.

  2. Press the menu button on the receiver down and hold it to enter system menu.

  3. Scroll down and choose “Register Alarm” menu.
    B10 Smart Bite Watch HOW TO REGISTER ANTI-THEFT ALARM
TH9s

  4. Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3, A-EFT CHA4). We recommend to start with A-EFT CHA1. Press the button down to select the channel.
    B10 Smart Bite Watch HOW TO REGISTER ANTI-THEFT ALARM
TH9s

  5. Turn on the TH9s Anti-Theft Alarm.

  6. Press the right button on the TH9s twice.
    B10 Smart Bite Watch HOW TO REGISTER ANTI-THEFT ALARM
TH9s

  7. Registration was successful when the display shows “Reg SUCCESS”.

SMART BAND B9 HOW TO REGISTER ANTI-THEFT ALARM TH9s

  1. Turn on the Smart Band B9 by pressing and holding the button for a few seconds.

  2. Turn on the TH9’s anti-theft alarm.

  3. Press the button twice to activate register mode. The LED will flash red.

  4. Switch through the channels by pressing the button once. You must press the
    button briefly until the purple LED flashes. Note: The purple channel is the anti-theft channel.

  5. When the purple LED flashes, press and hold the button for 3 seconds until the LED lights up continuously.

  6. Press the button on the TH9s twice.
    SMART BAND B9 HOW TO REGISTER ANTI-THEFT ALARM TH9s

  7. The registration was successful when the LED lights up again and the band vibrates.

H9pro Headtorch HOW TO REGISTER ANTI-THEFT ALARM TH9s

H9pro Headtorch HOW TO REGISTER ANTI-THEFT ALARM TH9s

  1. Turn on the H9pro.

  2. Turn on the Anti-Theft Alarm.

  3. Enter register mode on the H9pro: Press the button on the H9pro three times. The LED on the H9pro will fiat

  4. Press the right button on the TH9s twice.

  5. The registration was successful when the LED lights up.

H10 Headtorch HOW TO REGISTER ANTI-THEFT ALARM TH9s

H10 Headtorch HOW TO REGISTER ANTI-THEFT ALARM TH9s

  1. Turn on the H10 headtorch.

  2. Turn on the TH9s Anti-Theft Alarm

  3. Enter register mode on the H10 by pressing and holding the two buttons down for 5 seconds.
    The LED on the headtorch will ash.

  4. Press the right button on the TH9s twice.

  5. The registration was successful when the LED lights up.

Bivvy Light HOW TO REGISTER ANTI-THEFT ALARM TH9s

Bivvy Light HOW TO REGISTER ANTI-THEFT ALARM TH9s

  1. Turn on the bivvy light.
  2. Turn on the Anti-Theft Alarm
  3. Double-click the button of the bivvy light; the light will fiat red.
  4. The fishing color indicates the channel. You can switch between the channels by clicking on the button. You must select the purple channel.
  5. As soon as the Bivvy light fishes in purple, press the button on the
    TH9s Anti-Theft Alarm. Purple channel is the Anti-Theft channel.
    Bivvy Light HOW TO REGISTER ANTI-THEFT ALARM TH9s

Air Light Sounder (ALS) HOW TO REGISTER ANTI-THEFT ALARM TH9s

Air Light Sounder \(ALS\) HOW TO REGISTER ANTI-THEFT ALARM
TH9s

  1. Turn on the ALS.

  2. Turn on the TH9s Anti-Theft Alarm.

  3. Enter register mode on the ALS: long press the M button until you hear a tone.
    The LED on the ALS will ash red.

  4. Press the button on the TH9s twice.

  5. Registration was successful when the RED LED lights up.

Customer Support

Email:info@newdirectiontackle.co.uk

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals