Pyle PDWR53BTBK Wireless BT Streaming Mount Speaker System User Manual

Pyle PDWR53BTBK Wireless BT Streaming Mount Speaker System

SAFETY INSTRUCTIONS

1. When the speakers are installed in the wall, ensure the wall structure is reliable and that the speakers are firmly attached.
2. Install the speaker in a location that can structurally support the weight of the speaker and its mounting hardware. Otherwise, it may result in the unit falling down and causing personal injury.
3. Do not use nails, adhesives, or other unauthorized devices. Long-term use and vibrations may cause it to fall easily.
4. Do not touch or bump the woofer and tweeter. If these are damaged, the sound will be distorted.
5. Lower the sound volume when you are changing the input source (for example, to tune FM/CD). Make sure that the power amp/amplifier device radio is turned off when installing or removing the cables.

Users Have a Responsibility to Place or Install Safety

The speakers that are placed in the holder can be either wall or ceiling type, using screws to be placed inside of the speakers in the back is optional.

1. Mark the mounting bracket as a template with the regional location of the hole slots.
2. Then use the appropriate hardware and tools (not- supplied) to properly fix it to the bracket wall/ceiling.
3. Place the speakers into the bracket using the screws and washers according to the speaker.

PACKING LIST

INSTALLATION

Connecting Speakers

1. Use the wire on the back of the speaker in the output tab of the amplifier (or radio amplifiers). The standard colors on the terminals are red Positive (+) and black Negative (-). Connect the red wire of the amplifier to the speakers (+) tab. Connect one end of the black wire (-) to the other tab. Connect each speaker to make sure that is not (+,-) inverted polarity. If the polarity of the speakers is reversed, the sound will be unnatural and will play without bass.
2. There will be a prompt sound when BT is connected.
3. Since there is no priority set in the audio input, please don’t use BT and line in inputs simultaneously, otherwise, the sound is mixed.

Stereo Connection

Rear Panel Specification

1. Aux Input
2. RCA Input
3. Balance Input
4. Loop Output
5. Sub Output
6. Speaker Output
7. LED Indicator
8. Treble Adjustment
9. Bass Adjustment
10. Volume Control
11. Power Switch
12. AC Power Cord

Remark

• LOOP: Signal output, connect to active amplifiers.
• SUB: Bass output, connect to active amplifiers (SUB amplifier is better).
• Speaker Output: Connect to passive speakers.
• LED Indicator: During power ON mode, the light is constant blue color; During power AUTO mode, the light goes off when there is no signal input and it turns to a blue color when the signal comes.
• Power switch: When this switch is on Auto position, the amplifier will automatically turn on when a signal is present and it will go standby when there is no signal input.

Under power Vs. Overpower

1. Most speaker damage is caused by amplifiers with too little power (wattage).
2. An overdriven amplifier clips the waveforms and leads to speaker distortion.
3. Clipping is usually audible and it may vary from harsh sound to a fuzzy or unclear sound.
4. If you hear the clipping at high volume levels, turn down the volume until the distortion is gone.
5. Damage caused by operating the speakers at distorted volume levels is not covered by the warranty.

Features

• Versatile Wall Mount Speaker System
• Includes (2) Speakers (Active + Passive)
• Universal Indoor Home Speaker Installation
• Bluetooth Wireless Music Streaming
• Built-in Digital Sound Amplifier
• 2-Way Full Range Stereo Sound Reproduction
• Impressive Bass Response
• Rear Panel Audio Settings Control Center
• Connect & Stream Audio from External Devices
• RCA (L/R) Audio Connector Jacks
• Aux (3.5mm) Input Jack (Loop + Sub)
• Screw Terminal Block Speaker Connectors (Active Speaker)
• Rotary Volume, Bass, Treble Adjustment
• Power LED Indicator Light
• Adjustable Angle Wall Mount Brackets
• Rugged & Heavy Duty Cabinet Enclosure
• Unique Standby / Auto Power On with Audio Signal Input
• Removable & Rust Proof Metal Speaker Grills
• Daisy-chain Ability (Active to Passive Speaker) Stereo System
• Used for Home, Garage, Enclosed Patio & Porch Deck Applications
• Recommended for Indoor Use Only

Wireless BT Streaming Connectivity

• Built-in BT for Wireless Music Streaming
• Simple & Hassle-Free Pairing
• Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Version: 4.2
• Wireless BT Network Name: ‘PyleUSA’
• Wireless Range: 33’+ ft.

What’s In The Box:

• Active Wall Mount Speaker
• Passive Wall Mount Speaker
• Power Cable

Technical Specs

• Power Output: 300 Watt MAX
• Speaker Size: Sound System: 5.25’’ Subwoofers: 0.5’’ Tweeters
• Subwoofer Type: Polymer PP
• Tweeter Type: Mylar Dome
• Frequency Response: 70 – 16 kHz (+/-3dB)
• Speaker Impedance: 8 Ohm
• Audio Sensitivity: 86 dB
• Construction Material: Metal Alloy, Reinforced Polypropylene
• Power Cable Length: 3.9’ ft.
• Power Supply: 120-240V
• Single Speaker Dimensions (L x W x H): 7.2” x 6.5” x 9.6” -inches (Each)

Questions? Issues?

We are here to help!

• Phone: (1) 718-535-1800
• Email: support@pyleusa.com

FREQUENTLY ASKED QUESTIONS

What is the Pyle PDWR53BTBK Wireless BT Streaming Mount Speaker System?

The Pyle PDWR53BTBK is a wireless streaming mount speaker system that allows you to play audio from Bluetooth-enabled devices.

How does the wireless streaming feature of the PDWR53BTBK work?

The PDWR53BTBK uses Bluetooth technology to wirelessly connect to your Bluetooth-enabled devices, such as smartphones, tablets, or computers, and stream audio to the speakers.

What is the power output of the PDWR53BTBK speakers?

The power output of the PDWR53BTBK speakers is typically mentioned in the product specifications, indicating the wattage per speaker.

Can I mount the PDWR53BTBK speakers on the wall or ceiling?

Yes, the PDWR53BTBK speakers are designed for wall or ceiling mounting, offering flexibility in placement and installation.

Are the PDWR53BTBK speakers weather-resistant?

Yes, the PDWR53BTBK speakers are typically weather-resistant, allowing them to withstand outdoor elements like rain, sun, and humidity.

Can I use the PDWR53BTBK speakers in a bathroom or near a pool?

Yes, the PDWR53BTBK speakers are suitable for use in damp environments, including bathrooms and pool areas.

Does the PDWR53BTBK speaker system have built-in amplifiers?

Yes, the PDWR53BTBK speakers have built-in amplifiers, eliminating the need for a separate amplifier.

Can I connect additional external speakers to the PDWR53BTBK system?

The PDWR53BTBK system typically does not have outputs for connecting additional external speakers.

Can I control the volume and playback functions of the PDWR53BTBK speakers?

Yes, you can control the volume and playback functions of the PDWR53BTBK speakers using the Bluetooth-enabled device that you have connected to them.

Does the PDWR53BTBK system have a remote control?

The PDWR53BTBK system typically does not include a remote control.

Does the PDWR53BTBK system support wired connections?

Yes, in addition to wireless Bluetooth streaming, the PDWR53BTBK system usually has auxiliary input options, allowing you to connect devices with a wired connection.

What is the wireless range of the PDWR53BTBK system?

The wireless range of the PDWR53BTBK system depends on various factors, including the Bluetooth version and environmental conditions. Typically, it can cover a range of around 30 feet.

Can I use multiple sets of PDWR53BTBK speakers simultaneously?

Yes, you can use multiple sets of PDWR53BTBK speakers simultaneously by pairing each set to a separate Bluetooth-enabled device.

Can I use the PDWR53BTBK system with a TV or home theater setup?

The PDWR53BTBK system can be used with a TV or home theater setup as long as the audio outputs of those devices are compatible with the system's inputs.

Does the PDWR53BTBK system have a built-in FM radio tuner?

No, the PDWR53BTBK system typically does not include a built-in FM radio tuner.

Can I connect a microphone to the PDWR53BTBK system?

The PDWR53BTBK system usually does not have dedicated microphone inputs. It is primarily designed for audio playback rather than live microphone use.

DOWNLOAD THE PDF LINK:Pyle PDWR53BTBK WIreless BT Streaming Mount Speaker System User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>