HOBO S-BPB-CM50 Barometric Pressure Smart Sensor Instruction Manual
- June 12, 2024
- Hobo
Table of Contents
HOBO S-BPB-CM50 Barometric Pressure Smart Sensor
The Barometric Pressure Smart Sensor (S-BPB-CM50) is a device that measures barometric pressure and is compatible with various weather stations. It provides accurate and reliable readings of atmospheric pressure, which can be used for weather monitoring, research, and other applications.
Product Usage Instructions
- Before connecting the sensor, ensure that the weather station is stopped if it is currently logging data.
- Locate an open smart sensor port on the weather station where the smart sensor jack can be plugged in.
- Plug the smart sensor jack into the open smart sensor port firmly.
- Once the sensor is connected, start the logging process on the weather station according to the instructions provided in the station manual. For detailed operating instructions, refer to the station manual available at www.onsetcomp.com/resources/documentation/12291-man-s-bpb.
For more detailed information about the Barometric Pressure Smart Sensor (S -BPB-CM50), please refer to the full product manual. You can either scan the QR code on the left or visit www.onsetcomp.com/resources/documentation/12291-man-s-bpb. If you have any further questions or need assistance, you can contact our U.S. and International Sales team at 1-508-759-9500 or visit our support page at www.onsetcomp.com/support/contact. 21829-B MAN-S-BPB-QSG
Connecting to a Station
- Stop the station if it is logging.
- Plug the smart sensor jack into an open smart sensor port on the station.
- Start logging. See the station manual at www.onsetcomp.com/resources/documentation/12291-man-s-bpb for details on operating stations with smart sensors.
Mounting the Smart Sensor
- Use the cable ties to mount the smart sensor to a pole or tripod mast as shown in the photo.
- To mount the sensor on a flat, vertical surface, use the screws provided.
- The sensor must be mounted vertically to prevent water from collecting under the cap.
- Mount the sensor so that the cable is hanging straight down and create a drip-loop to prevent moisture from entering the logger connection as shown in the illustration.
- Do not screw the sensor to the side of the HOBO station case. Inserting screws in the side of the HOBO station case will violate the integrity of the unit. You can use double-sided tape.
For more information about this smart sensor, refer to the full product manual. Scan the code at left or go to www.onsetcomp.com/resources/documentation/12291-man-s-bpb.
U.S. and International Sales:
1-508-759-9500
www.onsetcomp.com/support/contact.
© 2023 Onset Computer Corporation. All rights reserved. Onset and HOBO are
registered trademarks of Onset Computer Corporation. All other trademarks are
the property of their respective companies. Barometric Pressure Smart Sensor
(S-BPB-CM50) Quick Start
References
- Barometric Pressure Smart Sensor (S-BPB-CM50) User's Manual | Onset's HOBO and InTemp Data Loggers
- Technical Support | Onset's HOBO and InTemp Data Loggers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>