Pyle PPRE70BT Rack Mount Studio Pre-Amplifier User Manual
- June 12, 2024
- Pyle
Table of Contents
Pyle PPRE70BT Rack Mount Studio Pre-Amplifier
Safety Precaution
Read all documentation carefully before operating the equipment. Retain this manual for future reference. Follow all instructions printed on the unit for proper operation.
- Do not operate cover (or back cover) to reduce the risk of electric shock or fire. There are no User serviceable parts inside. Refer servicing to qualified service personnel.
- This symbol is used to alert the operator to the presence of important operating instructions and precautions detailed in the documentation manual.
- This symbol is used to warn operators that uninsulated dangerous voltages are present within the product’s enclosure that may pose a risk of electric shock.
Warning:
- To avoid fire or the risk of electric shock, do not expose this unit to rain or moisture.
Notes:
- Make sure power outlets conform to the power requirements listed on the back of the unit.
- The main Voltage must be correct and the same as that printed on the rear of the unit.
- Do not use the unit if the electrical cord is frayed or broken.
- The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the unit.
- The unit shall be connected to a main socket outlet with a protective earth-ground connection.
- Do not use equipment if the Power plug is damaged, smashed, bent, or pinched.
Warning:
- Using, adjusting, or changing program control beyond this specification may cause dangerous radiation.
- The unit should be serviced by qualified service personnel.
- When repairing, use only the same specification parts.
Notes:
- Select the voltage requirement by adjusting the voltage selector switch at the rear panel.
- Make sure that the power of the equipment is off and disconnected from the main voltage before switching the voltage selector to the required setting. We will not be responsible for damages arising from the improper installation, wiring or operation due to the fault or negligence of the user.
Control & Layout Configuration
- POWER SWITCH: Press to switch the power unit ON or OFF.
- 3.5MM INPUT 1: To connect with other music sources with 3.5mm Jack
- Headphone output: To connect with headphones
- XLR MIC INPUT: 1/4” /XLR combo jack for microphone
- LEVEL CONTROL: For microphone level controls
- BASS: Adjusts the bass frequency of the main output
- MID: Adjusts the mid-frequency of the main output
- TREBLE: Adjusts the high frequency of the main output
- BALANCE: Adjusts the balance of the main output
- MASTER VOLUME: Adjusts the master volume of the main output
- USB DISPLAY SCREEN: To show the name of the songs from USB, song time
- USD SLOT/SD CARD SLOT: USB slot capacity is up to 32G
- TAPE MONITOR: Press this button to use ‘TAPE input/output from rear panel sources only.
- INPUT SELECTOR: To choose different input sources
- MP3 CONTROL BUTTON PART:
- MODE: Press to select the USB/SD/FM/BT/Recording mode. The unit is set in MP3 mode and only when you press the “MODE” button go to another mode.
- REPEAT: There are 3 types of Repeat and they will show on the screen, and you can press this button to select the favorable repeat type, such as SINGLE/REPEAT /RANDOM/ALL REPEAT. Press this button for more than 3 seconds, it will go to the Folder searching function, press Prev/Next buttons to go to the previous folder or the next folder. Press the REPEAT button again to exit FOLDER searching.
- PLAY: Press to start to play the tracks. When in the RECORDING MODE, press this button to start recording.
- PREVIOUS TRACK: Press to play the previous track from USB or SD card. When in FM mode, it is for the previous station.
- NEXT TRACK: Press to play the next track. When in FM mode, it is for the next station.
- FM antenna: Adjust for better signal reception
- RCA INPUTS: Connect the audio output jacks of DVD/CD, to these jacks
- TAPE INPUT AND OUTPUT: Press the TAPE monitor on the front panel to monitor the headphone or connect with another amplifier through REC INPUT. To connect with other audio input jacks to PLAY OUTPUT
- BALANCE OUTPUT: RCA types AUX OUT jacks
- UNBALANCED OUTPUT: XLR types AUX OUT jacks
- GROUND: Electrical ground
- TUNER ANT: Connect for FM antenna
- POWER SOCKET: To connect the power cord
- VOLTAGE SELECTOR: To select the correct local voltage
Remote control
- Press this button to turn on the MP3
- In FM mode, press these two buttons to select the previous or next channel.
- Press these two buttons to select the previous or next track in USB or SD or Wireless BT mode
- Volume up or down
- Press the numbers to select the tracks directly. The unit takes 1-2 seconds to respond in USB or SD mode.
- Press this button to select the different repeat modes. Pressing this button for more than 3 seconds will enter into the FOLDER searching
- Press this button to select the playing mode, such as USB/SD/FM/WIRELESS BT
- EQ function, if the mp3 with EQ
- Play and pause function for MP3
Wireless BT Connectivity:
- Built-in Wireless BT Music Streaming Receiver
- Compatible with All of Your Favorite Wireless BT Devices (iPhone, Androids, Smartphones, iPad, Tablets, etc.)
- Wireless BT Version: 2.1
- Wireless BT Network Name: BT
- Wireless Range: 25’+ ft.
Features
- Rack Mount Amplifier Sound Receiver System
- Wireless BT Audio Streaming Ability
- Unique Recording Mode Saves Audio via USB/SD Port
- USB Flash & SD Memory Card Readers
- Aux (3.5mm) Input Jack
- Connect & Stream Audio from External Devices
- FM Radio with Digital LCD Display
- ID3 Tag Readout Displays Song Title
- Multi-Source RCA (L/R) Audio Input Connectors
- RCA (L/R) Audio Output Connectors
- Combo 1/4’’ / XLR Combo/Microphone Input Jack
- (2) XLR Audio Output Jacks
- Front Panel Button Control Center
- Independent Input Source Selectable
- Bass, Treble, Mid, Balance, Master Volume Adjustable
- Headphone Jack, 3.5mm
What’s in the Box
- Amplifier Receiver
- Remote Control
- Detachable Hardware Rack Mounts
- Power Cable
- FM Antenna
Technical Specs
- Rated Power input: 7W
- Input currency: 30mA
- Max power consumption: 15W
- Construction Material: Metal, Aluminum Alloy Panel
- Frequency response: 20-20KHz, +/-2dB
- S/N Ratio: >85dB
- T.H.D.: <1.0%
- Input sensitivity: 200mV (Max Output: 6000mV)
- Battery Operated Remote Control, Requires (1) x ‘CR-2032’ Battery (Included)
- Maximum USB Flash & SD Memory Card Support Size: 32GB
- Digital Media File Support: MP3, WAV
- Power Cable Length: 4.5’ ft.
- Power: 120/240V, Switchable
- Dimensions (L x W x H): 19.0’’ x 4.7’’ x 1.7’’ -inches
This product can expose you to a chemical or group of chemicals, which may include ”Nickel Carbonate” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
Questions? Issues?
We are here to help!
- Phone: (1) 718-535-1800
- Email: support@pyleusa.com
FREQUENTLY ASKED QUESTIONS
What is the Pyle PPRE70BT Rack Mount Studio Pre-Amplifier?
The Pyle PPRE70BT is a rack-mountable pre-amplifier designed for use in studio and audio applications.
What are the main features of the Pyle PPRE70BT?
The Pyle PPRE70BT features Bluetooth connectivity, USB/SD card readers, multiple audio inputs, equalizer controls, and a built-in FM radio.
What audio inputs are available on the Pyle PPRE70BT?
The Pyle PPRE70BT offers a variety of audio inputs, including RCA, XLR, 1/4
Can I connect external devices via Bluetooth to the Pyle PPRE70BT?
Yes, the Pyle PPRE70BT supports Bluetooth connectivity, allowing you to stream audio wirelessly from compatible devices.
Does the Pyle PPRE70BT have a built-in amplifier?
No, the Pyle PPRE70BT is a pre-amplifier, which means it prepares audio signals for amplification but does not include a power amplifier.
Can I control the tone or equalization settings on the Pyle PPRE70BT?
Yes, the Pyle PPRE70BT has equalizer controls, including bass, treble, balance, and fader adjustments.
Does the Pyle PPRE70BT support recording audio?
Yes, the Pyle PPRE70BT allows you to record audio directly to USB flash drives or SD cards.
Can I listen to FM radio with the Pyle PPRE70BT?
Yes, the Pyle PPRE70BT includes a built-in FM radio tuner with station presets.
Is the Pyle PPRE70BT compatible with other rack mount equipment?
Yes, the Pyle PPRE70BT is designed for rack mounting and can be easily integrated into a rack system with other equipment.
What is the power source for the Pyle PPRE70BT?
The Pyle PPRE70BT typically operates using an AC power source.
Does the Pyle PPRE70BT have phantom power for condenser microphones?
Yes, the Pyle PPRE70BT provides +48V phantom power, which is compatible with condenser microphones.
Can I use the Pyle PPRE70BT for live performances or public address (PA) systems?
Yes, the Pyle PPRE70BT can be used in live performances or PA systems to control audio inputs and provide audio processing.
Does the Pyle PPRE70BT support digital audio formats?
The Pyle PPRE70BT primarily focuses on analog audio inputs and does not have dedicated digital audio inputs or outputs.
Can I connect headphones to the Pyle PPRE70BT?
Yes, the Pyle PPRE70BT usually includes a headphone output for private monitoring.
Is the Pyle PPRE70BT suitable for home audio systems?
Yes, the Pyle PPRE70BT can be used in home audio setups to enhance audio signals and provide additional functionality.
DOWNLOAD THE PDF LINK:Pyle PPRE70BT Rack Mount Studio Pre-Amplifier User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>