aquasana AQ-CWM2-R Clean Water Machine Instruction Manual
- June 12, 2024
- aquasana
Table of Contents
aquasana AQ-CWM2-R Clean Water Machine
Product Information
- Product Name: Countertop Water Filter Clean Water Machine
- Model: AQ-CWM2-B
- Certifications: WQA certified to NSF/ANSI Standards 42, 53, and 401
- Recommended Replacement Frequency: Every 6 months or 300 gallons of use
- Compatibility: Compatible with AQ-CWM2-B
Product Usage Instructions
- Unbox replacement filters and remove the plastic.
- Remove the filter housing lid.
- Twist the filter chamber cap to the left and remove the old filter from the cap. Discard the old filter.
- Press the new filter into the filter chamber cap.
- Fill the water tank and place it on the housing unit dispenser dock, ensuring a snug fit.
- Insert the filled water tank into the housing unit dispenser dock and twist it to the right to close.
- Press the dock button three times quickly. The light will illuminate red for 5 seconds.
- While the red light is illuminated, press and hold the lock button for 1 second. The light will blink red. The system will flush, and the light will continue to blink red. The flush process will take about 60 seconds.
- As the flush completes, the light will blink blue.
- The light will illuminate blue for 5 seconds to confirm that the flush is complete. Once the flush is complete, your system is ready to use.
- NOTE : Do not drink flushed water. Discard the flushed water.
NOTE: Do not use the product with water that is microbiologically unsafe
or of unknown water quality without adequate disinfection before or after the
system.
For more information about replacement videos, the full list of filtered
contaminants, and performance data, please visit
Aquasana.com.
To protect your investment and take advantage of the extended warranty,
discount replacements, free shipping, and no contract, contact us at
waterforlife@aquasana.com.
Use only certified, genuine Aquasana replacement filters to ensure continued
contaminant removal and system performance.
Replacement Filter Instructions
- Unbox replacement filters and remove the plastic. Remove the filter housing lid. Twist the filter chamber cap to the left and remove the old filter from the cap. Discard the old filter.
- Press new filter into filter chamber cap ensuring a snug fit. Insert into the housing unit and twist right to close
- Fill water tank and place on dispenser dock.
- Press the dock button 3 times quickly. Light will illuminate red for 5 seconds
- While red light is illuminated, press and hold the dock button for 1 second. Light will blink red. While the system flushes, the light will continue to blink red. Flush will take about 60 seconds. As the flush completes, the light will blink blue.
- Light will illuminate blue for 5 seconds to confirm flush is complete. Once the flush is complete, your system is ready to use.
NOTE:
Do not drink flushed water. Discard water.
NOTE : Do not use with water that is microbiologically unsafe or of unknown water quality without adequate disinfection before or after the system
Scan to view the replacement video
For the full list of contaminants filtered, scan to view the Performance Data Sheet on Aquasana.com.
AQ-CWM2-R is certified by WQA to NSF/ANSI Standards 42, 53, and 401 when used in AQ-CWM2-B for the reduction of the claims specified on the Performance Data Sheet and at www.WQA.org.
Protect your investment and save money with our Water for Life program
.
CONTACT US TO LEARN MORE waterforlife@aquasana.com
The recommended replacement frequency for the AQ-CWM-B is every 6 months or
300 gallons of use. Use only certified, genuine Aquasana replacement filters
for continued contaminant removal and system performance.
Aquasana, Inc. 6310 Midway Road Haltom City, Texas 76117 USA 866.662.6885
CAN877.332.7873
www.aquasana.com
References
- Aquasana Water Filters | Whole House Water Filtration Systems
- Aquasana Water Filters | Whole House Water Filtration Systems