Claro C8935 Android TV Box User Guide

Claro C8935 Android TV Box

Product Information

The Claro powered by Android TV TM is a set-top box that allows you to stream content and access various apps and services on your TV. It comes with a remote control for easy navigation and control. The box supports various video and audio formats, and it has built-in Wi-Fi for internet connectivity.

Key Features:

• Operating System: Android TM 10
• Processor: ARMQuad Cortex-A55 64-bit
• Video Output: HDMI 2.1, Superior, AV
• Audio Output: Optical
• Supported Video Formats: AV1 MP-10 4K 2K @ 60fps, H.265 HEVC Mp-10 4K 2K @ 60fps, VP9 4K 2K @ 60fps, H.264 AVC 4K 2K @ 30fps, MPEG1 / 2/4 ASP, RealVideo8 / 9 / 10, and other video formats
• Supported Audio Formats: MPEG1 / 2, MP3, AAC / HE-AAC, and other audio formats
• Network Connectivity: Wi-Fi 2.4GHz / 5.0GHz 802.11 a / b / g / n / ac, RJ45 10M / 100M Ethernet
• Power Input: AC100-240V 50 / 60Hz

Product Usage

1. Read the user manual thoroughly before operating the TV box.
2. Safety Instructions:
   • Avoid touching the power adapter with wet hands.
3. Check the package contents upon opening:
   • TV Box x1
   • Remote Control x1
   • Power Adapter x1
   • HDMI Cable x1
   • User Manual x1
4. Hardware Structure:
   • Front Panel: Display and control buttons
   • Left Side Panel: TF card slot, USB port
   • Right Side Panel: USB port
   • Rear Panel: HDMI port, Ethernet input port, power source port
5. Using the Remote Control:
   • Power On/Off: Press the power button
   • Navigation: Use the arrow buttons to move up, down, left, and right
   • Enter/Confirm: Press the enter button
   • Playback Control: Use the rewind and play/pause buttons
6. Connect the TV Box to your TV:
   • Connect one end of the HDMI cable to the HDMI port on the TV Box and the other end to an available HDMI input on your TV.
7. Connect to Power:
   • Plug the power adapter into a power outlet.
   • Connect the other end of the power adapter to the power source a port on the TV Box.
8. Connect to the Internet:
   • For a Wi-Fi connection, go to the settings menu on the TV Box and select your Wi-Fi network. Enter the password if prompted.
   • For a wired connection, connect one end of an Ethernet cable to the Ethernet input port on the TV Box and the other end to your router or modem.
9. Enjoy streaming content and accessing apps on your TV using the Claro powered by Android TV TM.

Please read the user manual before operating the TV box

Security instructions

• Keep the product in a horizontal position. Do not place heavy objects on top of the TV box.
• Use the power adapter provided by the manufacturer. Do not use the damaged power cord or plug.
• Avoid touching the power adapter with wet hands.
• Do not disassemble or modify the TV box by yourself to avoid electric shock or damage.
• Please keep the TV box away from any heat source to avoid damage.
• Keep the device in a dry and well-ventilated area, away from dust that could cause fire or electric shock.
• Quickly turn off and unplug the device’s power adapter if the device emits smoke or an unpleasant odor.
• Please unplug the power adapter from the device when it is not in use for long periods of time.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Accessories list

Open the package and check the following accessories:

Hardware structure

Front panel

left side panel

right-side panel

back panel

Remote control

Instructions

• Indicator light: You pressed any button and the indicator light turns on.
• Bluetooth Pairing: Pressed “OK” and “Volume Down” buttons together on your remote for 10 seconds;
• Voice Search – Just say what you want to see with voice search.
• Android TV is a trademark of Google LLC.

System connection

See the instructions below to connect the TV, power, network, and other devices.
Note: Please turn off all equipment before connecting (such as TV Box and TV power).

Step 1: Connect with the TV

• Connect the HDMI/AV cable to the HDMI/AV port of the TV box and the TV.

Step 2: Connect to the network

• Use the Ethernet cable to connect the LAN port of the TV box and the Ethernet port or router of your home broadband network.

Step 3: Connect with the power

• Connect the power adapter to the TV box. Once powered on, it can start automatically.

Step 4: Set up your device

• Follow the instructions on the screen to set up your device.

Technical specifications

Problem-solving

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>