ADJ 710-00091 Switch 4 8 Porte POE 2 Porte Uplink User Manual

ADJ 710-00091 Switch 4 8 Porte POE 2 Porte Uplink

PoE Switch Connection Schematic Diagram

Take the standard 4+2 Ports/ 8+2 Ports PoE switch as in these examples:

Product Features

1. Supply power to device which support PoE
2. Support IEEE802.3AF/AT Protocol
3. Each port Output Max.30W
4. Support 250m Transmission Distance
5. Support Vian

PoE Front Panel Sticker

• Switch 4+2 Ports PoE
  

• Switch 8+2 Ports PoE
  Note: 1-8 port connect IPC/AP/IP PHONE/Smart Home 9-10 port connect NVR and Router
  

Specifications

710-00092
POE Port| 1 to 4 support IEEE802.3AF/AT Standard
Output Power| 15.4W/30W IEEE802.3af/at
Power Pin| 1/2+,3/6-
Whole Power| < 78W (52V 1.SA)
POE Protocol| IEEE 802.3af/IEEE 802.3at
POE Type| End-span
Power Distance| < 250m
Network Standard| IEEE 802.3, IEEE802.3u, 802.3x, 802.3af/at
Network Medium| 10/1 00BASE-TX: 5 class and above non shielded twisted pair
Data Distance| < 250m
Switch Capability| 1.6Gbps
Forwarding Mode| Store and forward
Forwarding Rate| 1 0BASE-T: 14880PPS/port

1 00BASE-tx: 14800pps/ port

MAC Address| MAC address table 1 K
Port Function| Power priority mechanism, fast and forward, MAC automatic learning and aging
IEEE802.3X Full-duplex and mode and back pressure for Half-duplex mode
LED Indicator| LINK/ ACT.1 00Mbps; POE Status Indicator; Power indicator; Extender
Working Environment| Working temperature: -10° / 55°C
Weight| 1kg
Size| 200mml 20mm44mm(L WH)
Product Code| 8+2 Port 250m POE Switch (Built-in)
---|---
710-00091
POE Port| 1 to 8 support IEEE802.3AF/AT Standard
Output Power| 15.4W/30W IEEE802.3af/at
Power Pin| 1/2+, 3/6-
Whole Power| < 120W (52V 2.3A)
POE Protocol| IEEE 802.3af /IEEE 802.3at
POE Type| End-span
Power Distance| < 250m
Network Standard| IEEE 802.3, IEEE802.3u, 802.3x, 802.3af/at
Network Medium| 10/1 00BASE-TX: 5 class and above non shielded twisted pair
Data Distance| < 250m
Switch Capability| 12 Gbps
Forwarding Mode| Store and forward
Forwarding Rate| 100Mbps:14880pps
1 000Mbps: 14800pps
MAC Address| MAC address table 2 *** K
Port Function| Power priority mechanism, fast and forward, MAC automatic learning and aging
IEEE802.3X Full-duplex and mode and back pressure for Half-duplex mode
LED Indicator| LINK/ ACT.1 00Mbps; POE Status Indicator; Power indicator; Extender
Working Environment| Working temperature: -10° / 55°C
Weight| 1.2 kg
Size| 270mm180mm 44mm (L W*H)

Warranty

This product is guaranteed against any manufacturing defect, as defined on the D.Lgs. February 2, 2002, No 24. In case of failure, please contact the retailer where you purchased it. You can be found at www.adj.it for standards guarantee.
Please use the product only for the purpose for which it was designed. It is forbidden any other use or modification .

This product complies with the following directives:

|

• DIRECTIVE 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic compatibility;
• DIRECTIVE 2014/35/EU on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits;
• DIRECTIVE 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
  The declaration of conformity for this product is visible on www.adj.it site, on the product page.

---|---
| The symbol of the crossed out trash indicates that the product, at the end of its useful life, must be treated separately from domestic waste and must be taken to a recycling center for electrical and electronic equipment or delivered to the seller when buying a replacement. The separate waste collection contributes in preventing possible adverse effects on the environment and health and promote the recovery of materials it is made. You are responsible for assigning the equipment in question at the appropriate waste disposal center. For more detailed information contact your local waste disposal service or the shop where it was purchased. Anyone who does not carry the product in a recycling center for electrical and electronic waste shall be punished with administrative penalty provided by law on the illegal disposal of waste.
---|---

Customer Support

Additional compliance information:

To obtain additional information about the compliance, go to ADJ website: www.adj.it/certification or contact the ADJ Customer Support to the following e-mail address: supporto@adj.it

Made in China – Imported and distributed by loT Tecnologie s.r.l.
Via della Faeta, 1 – 00030 San Cesareo (RM)- ITAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>