Apps LED Atmosphere Light App User Guide

Apps LED Atmosphere Light App

Product Information

The product is an LED Whip Light that comes in two different options: a single piece set and a combo set. The single piece set includes an American Flag, Flag Mounting Kits, a Controller with Extension Wire, an RF remote, and one LED Whip Light. The combo set includes two American Flags, two Flag Mounting Kits, a Controller with Extension Wire, an RF remote, and two LED Whip Lights.

Product Usage Instructions

1. Installation:

   • Start by unpacking the box and ensuring that all the included items are present.
   • Locate a suitable mounting location for the LED Whip Light(s) on your vehicle.
   • Attach the Flag Mounting Kits to the desired location securely.
   • Connect the LED Whip Light(s) to the Controller using the provided Extension Wire.
   • Mount the Controller in a convenient and accessible location.
   • Make sure all connections are secure and properly tightened.

2. Powering On/Off:

   • To turn the LED Whip Light(s) on, switch the power button to the “ON” position.
   • To turn the LED Whip Light(s) off, switch the power button to the “OFF” position.

3. Adjusting Brightness:

   • To increase the brightness of the LED Whip Light(s), press the “Brightness plus” button.
   • To decrease the brightness, press the “Brightness minus” button.

4. Changing Speed:

   • To increase the speed of color switching or pattern movement, press the “Speed plus” button.
   • To decrease the speed, press the “Speed minus” button. 5. Switching Colors:
   • Press the “Color switch plus” button to cycle through different colors or modes.
   • Press the “Color switch minus” button to go back to the previous color or mode.

5. Music Mode:

   • Currently music mode is only available for songs that have been downloaded onto your phone. Apple Music, Spotify, and other streaming services generally do not down­load songs to your phone. As a solution, you can use the “Mic” mode so that your lights automatically adjust to the sound of music.
   • To use mic mode, click “mic” in the bottom right of the screen. Then, click “OK” to allow the app to access your phone’s mic.
     Any other questions? You can find a guide on the app’s features by clicking “settings” in the upper right hand corner of the screen, then clicking “guide”.
     

6. Auto Mode:

   • Press the “AUTO mode” button to activate the automatic color-changing mode.
   • The LED Whip Light(s) will cycle through different colors and patterns automatically.

7. Timing Off:

   • Press the “Timing 1 hour” button to set a timer for the LED Whip Light(s) to turn off after one hour.
   • Press the “Timing 2 hours” button to set a timer for the LED Whip Light(s) to turn off after two hours.

8. Music Rhythm:

   • Press the “Music rhythm plus” button to increase the sensitivity of the LED Whip Light(s) to music or sound.
   • Press the “Music rhythm minus” button to decrease the sensitivity.

Note: Always follow the manufacturer’s instructions and guidelines for safe and proper usage of the product.

Connections

1. Download “Magic-Lantern “from the App Store or Google Play Store.

2. Open the app and click “ok”. If you accidentally click “don’t allow”, go into your phone’s settings and find “Magic-Lantern”.
   Then, allow Bluetooth through your phone’s settings. This is essential to connect your phone to your lights.

3. Turn on your phone’s Bluetooth. Then, plug in and turn on your LED Atmo­sphere Lights. After, click the icon in the top left corner of the app. You should see your lights appear under “my devices” (this may take up to 3 minutes). Click on your lights to finish pairing them with your app.

LED Controlled By APP

• Works with APP
• Long-range control convenient and quick
• Brightness control from 1% to 100%
• Seven romantic scene modes are optional
• More Than 16million of Colors
• Multi modes can be controled by one APP
• DIY selection by APP controller to createyour great led mood lighting .

RF Remote Controller

Includes

• Box comes with (single pc)
• Box comes with (combo set)

Installations

Warning
It is recommended that this installation be performed by a licensed professional. The improper installation of this kit will void all warranties.
PLEASE READ THE FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE INSTALLING AND OPERATING THIS LED WHIP.

1. Mount up
   • Remove the bottom nut and the spring washer on the bottom of your quick-release mount
   • Mount the LED WHIP into any open ½” bolt mount on your vehicle. Make sure the flat washer is inbetween the whip and the mount
   • Place the spring washer underneath the mount and then rescrew the bottom nut
   • Have a pair? Go for round 2 and mount the 2nd whip the same way
2. Get Wired
   • Grab your battery cord and connect it to the bottom hanging cord on your LED WHIP
   • Have a pair? Connect the 3-prong plug coming out the side of the master LED WHIP to the plug coming from the slave LED WHIP.
   • Note: The slave LED WHIP cannot function without being connected to the master LED WHIP
   • Feed the power cord through to your vehicle battery Connect the terminal wire to the Positive(+ and Negative(-) terminals of your vehicle battery
   • Hide any extra wiring with zip ties
3. When whip is not attached to base, using supplied cap to keep dirt and debris out of connector.
4. Using the flag mounts to secure flag to the whip

SPECIFICATIONS

• One PC LED Whip
• One Pair LED Whips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>