Braber Equipment HAR60S Diamond Harrow Instruction Manual
- June 12, 2024
- Braber Equipment
Table of Contents
Braber Equipment HAR60S Diamond Harrow
Product Information
Product Name: Diamond Harrow
Model Number: HAR60S
Recommended Tools: 22 mm & 16 mm spanners or 7/8 and 5/8 spanners
Manufacturer: Brabereq.com
Contact Information:
- Email: wgsales@brabereq.com
- Phone: 604-850-7770
- Fax: 604-850-7774
- Toll-Free Phone: 1-877-588-3311
- Toll-Free Fax: 1-800-665-7334
Product Usage Instructions
Assembly Instructions
-
Part A: Fasten Part A to the ends of Parts D,using H parts as shown.
Figure 1: Part A, D, and H assembly -
Part F and G: Fasten Part F to the smaller hole using Part G. Then, using Part H, hold the other side in place. Ensure that Part G and F are assembled correctly as shown in the close-up photo.
Figure 2: Part F, G, and H assembly -
Part B: Fasten Part B using Part H to the assembly as shown.
Figure 3: Part B and H assembly -
Part C: Fasten Part C using H parts to the assembly as shown.
Figure 4: Part C and H assembly -
Part D: Fasten Part D using H parts to the assembly as shown.
Figure 5: Part D and H assembly -
Part C (Repeat): Fasten Part C using H parts to the assembly as shown.
Figure 6: Part C and H assembly -
Part D (Repeat): Fasten Part D using H parts to the assembly as shown.
Figure 7: Part D and H assembly -
Part F, G, and H (Repeat): Fasten Part F to the smaller hole using Part G. Then, using Part H, hold the other side in place. Ensure that Part G and F are assembled correctly as shown in the close-up photo.
Figure 8: Part F, G, and H assembly -
Part C (Repeat): Fasten Part C using H parts to the assembly as shown.
Figure 9: Part C and H assembly -
Part B (Repeat): Fasten Part B using H parts to the assembly as shown.
Figure 10: Part B and H assembly -
Part A (Repeat): Fasten Part F using H parts to the assembly as shown.
Figure 11: Part A and H assembly -
Part E: Loosen and remove the nuts shown, then add Part E to the assembly as shown. Tighten the nuts to the assembly once Part E is added.
Figure 12: Part E assembly -
Part E (Repeat): Loosen and remove the nuts shown, then add Part E to the assembly as shown. Tighten the nuts to the assembly once Part E is added.
Figure 13: Part E assembly
If you have any further questions or need assistance, please contact Brabereq.com using the provided contact information.
PARTS LIST
- A. 2x – 2 Hole Beam
- B. 2x – 3 Hole Beam
- C. 4x – 5 Hole Beam
- D. 5x – 5 Hole Beam (Short)
- E. 2x – 4 Hole Beam
- F. 2x – Hook Bar
- G. 2x – Hook Assembly
- H. 30x – Tine, Washer, & Nut
ASSEMBLY INSTRUCTIONS
Parts
- 1x Part A
- 2x Part D
- 2x Part H
Instructions
Fasten Part A to the ends of Parts D, using H parts as shown.
Parts
- 1x Part F
- 1x Part G
- 1x Part H
Instructions
Fasten Part F to smaller hole using Part G, then using Part H hold the other
side in place, as shown.
Ensure that Part G and F are assembled correctly, as shown in close-up photo.
Parts
- 1x Part B
- 1x Part H
Instructions
Fasten Part B using Part H to assembly, as shown
Parts
- 4. 1x Part C
- 2x part H
Instructions
Fasten Part C using H parts to assembly, as shown
Parts
- 5. 1x Part D
- 2x part H
Instructions
Fasten Part D using H parts to assembly, as shown
Parts
- 1x Part C
- 3x Part H
Instructions
Fasten Part C using H parts to assembly, as shown
Parts
- 1x Part C
- 3x Part H
Instructions
Fasten Part C using H parts to assembly, as shown
Parts
- 8. 1x Part D
- 3x Part H
Instructions
Fasten Part D using H parts to assembly, as shown
Parts
- 9. 1x Part D
- 3x Part H
Instructions
Fasten Part D using H parts to assembly, as shown
Parts
- 1x Part F
- 1x Part G
- 1x Part H
Instructions
Fasten Part F to smaller hole using Part G, then using Part H hold the other
side in place, as shown.
Ensure that Part G and F are assembled correctly, as shown in close-up photo.
Parts
- 1x Part C
- 4x Part H
Instructions
Fasten Part C using H parts to assembly, as shown
Parts
- 1x Part B
- 3x Part H
Instructions
Fasten Part B using H parts to assembly, as shown
Parts
- 1x Part A
- 2x Part H
Instructions
Fasten Part F using H parts to assembly, as shown
Parts
- 1x Part E
Instructions
Loosen and remove nuts shown, then add part E to assembly as shown. Tighten
nuts to assembly, once part E is added
Parts
- 1x Part E.
Instructions
Loosen and remove nuts shown, then add part E to assembly as shown. Tighten
nuts to assembly, once part E is added
BRABEREQ.COM
WGSALES@BRABEREQ.COM
PHONE: 604-850-7770
FAX: 604-850-7774
TOLL FREE PHONE: 1-877-588-3311
TOLL FREE FAX: 1-800-665-7334
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>