VITUSSO FIS05_ xxx Long Handle for Garda Vanity Units Installation Guide
- June 1, 2024
- Vitusso
Table of Contents
VITUSSO FIS05_ xxx Long Handle for Garda Vanity Units
Specifications
Version | 1.0 |
---|---|
Date | 11.04.2023 |
Model Code | FIS05_xxx |
Component Overview
The image depicts the assembly components for a piece of furniture. The components include:
- A wooden beam with a broken middle part, suggesting that it is designed to be split into two.
- Several screws, indicate hardware for assembly.
Assembly Steps
The assembly process is illustrated in a step-by-step manner:
- Position the wooden beam along the top edge of the furniture structure, aligning it with the pre-drilled holes.
- Secure the beam in place by driving the screws through the pre-drilled holes into the beam to connect it to the furniture structure.
FAQ
- What tools are needed for the assembly?
- A screwdriver will be required to secure the screws into the pre-drilled holes.
- Is the wooden beam supposed to be split?
- Yes, the beam is designed to be in two parts for ease of assembly and transportation.
- Are additional screws required for assembly?
- The number of screws shown should correspond to the number of pre-drilled holes in the beam and furniture structure. Ensure all are used for a secure fit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>