SPECIALIZED 0000189379 Globe Front Rack Installation Guide
- June 12, 2024
- SPECIALIZED
Table of Contents
SPECIALIZED 0000189379 Globe Front Rack
Product Information
The product includes the following items:
- A Front rack
- Mounting bolts M6 x 60 mm (2)
- M6 washer (4)
- M6 nut (2)
Additional required items:
- Your Globe 0-10 Nm torque wrench
- 5 mm hex bit
- 10 mm flat wrench
The front rack uses the MIK mounting system, allowing for easy fitment of various accessories such as bags, baskets, and child seats fitted with the MIK interface. The maximum load capacity of the rack is 20 kg, but always adhere to the lower weight limit of either the rack or the accessory.
Before using the front rack, it is important to practice riding in a controlled environment to get accustomed to the altered handling due to the change in center of gravity, weight, and balance.
Product Usage Instructions
- Position the rack (A) with the holes aligned onto the headtube mount (H). Ensure no wires or cables are routed or pinched between the rack and bicycle frame. All cables should pass around the outside of the rack mount in a position that offers the smoothest cable flow.
- Insert both mounting bolts (B) with washers (C) through the rack-mount (A) and headtube mount (H). Place washers (C) and nuts (D) onto the bolts.
- Using the large torque wrench supplied with your Globe bicycle (E), 5 mm hex bit (F), and 10 mm flat wrench (G), tighten the bolts to 8 Nm (71 in-lbf).
Ensure that the accessory is securely attached to the bicycle and regularly check that the front rack bolts are tightened to specification. Do not exceed the maximum allowed cargo weight for your bicycle/fork or the rack’s maximum allowed cargo weight limit. Avoid attaching any accessory that could interfere with passing traffic, obstacles, or pedestrians.
For detailed assembly instructions, refer to the provided online video guide by scanning the QR code. The video guide should be used together with this assembly/setup guide.
What’s Included
What’s Required
| # | INCLUDED ITEMS | QTY | DESCRIPTION |
|---|
A
|
Front rack
|
1
|
B
|
Mounting bolts M6 x 60 mm
|
2
|
C
|
M6 washer
|
4
|
D
|
M6 nut
|
2
|
#| REQUIRED ITEMS| QTY| DESCRIPTION
E
|
Your Globe 0-10 Nm torque wrench
|
1
| Use torque wrench supplied with your Globe bicycle to tighten bolts to spec. See end of assembly guide for torque specs.
F
|
5 mm hex bit
|
1
|
Use the 5 mm hex bit supplied with your Globe bicycle.
G
|
10 mm flat wrench
|
1
|
Assembly Instructions
The front rack is mounted to the two mounting points located on the head tube
on your Globe bicycle.
The following instructions will guide you through assembling the rack to your
bicycle safely.
-
Position the rack (A) with the holes aligned onto the headtube mount (H).
CAUTION: Ensure no wires or cables are routed or pinched between the rack and bicycle frame. All cables should pass around the outside of the rack mount in a position that offers the smoothest cable flow. -
Insert both mounting bolts (B) with washers (C) through the rack-mount (A) and headtube mount (H). Next, place the washers (C) and nuts (D) onto the bolts.
- Using the large torque wrench supplied with your Globe bicycle (E), 5 mm hex bit (F), and 10 mm flat wrench (G), tighten the bolts to 8 Nm 71 in-lbf.
Front Rack MIK Mounting System
The top plate of the front rack offers the unique MIK mounting profile that
allows for easy fitment of a wide variety of accessories such as bags,
baskets, and child seats fitted with the MIK interface.
-
WARNING! The maximum load capacity of the fitted front rack is 20 kg. However, the weight limit of the accessory may be lower. Always adhere to the lower of the weight limits of either the rack or the accessory.
Racks and baskets, especially when loaded, affect the handling of your bicycle by altering the center of gravity, weight, and balance. Before your first ride, you should practice riding in a controlled environment. -
WARNING! The Globe Front Rack is not rated for passenger use and should not be used as a seat under any circumstances. Follow maximum load limits for both the rack and any attached accessories.
-
WARNING! Never exceed the maximum allowed cargo weight for your bicycle/fork or the rack’s maximum allowed cargo weight limit. See the below table for the Globe bicycle racks and fork weight limit guidelines.
-
WARNING! The Globe front rack is intended for use on the Globe bicycle only.
-
WARNING! Racks, especially when loaded, affect the handling of your bicycle by altering the center of gravity, weight, and balance. Therefore, before your first ride, you should practice riding in a controlled environment.
-
WARNING! Make sure the accessory is securely attached to the bicycle. Loose accessories could shift during riding and cause you to lose control and fall.
-
WARNING! Do not attach any accessory to the bicycle that could interfere with passing traffic, obstacles, or pedestrians.
-
WARNING! Before your first ride and regularly thereafter, ensure the front rack bolts are tightened to specification.
Online Video Guides
An informative and important video explaining how to properly assemble the
Globe front rack is available by scanning the QR code. This assembly/setup
guide is intended to be used together with the video.
Maximum Weight Limits
| MODEL | CARGO |
|---|
FRONT (LB / KG)
HAUL ST| 44 / 20
HAUL LT| 44 / 20
SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037
408-779-6229
0000189379_AG_R2 07/22
We may occasionally issue updates and addendums to this document.
Please periodically check www.globebikes.com or
contact Rider Care to make sure you have the latest information. Info:
877-808-8154
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>