HOMCOM 824-012V70SR Oscillating Tower Fan Instruction Manual

: June 12, 2024
: HOMCOM

Table of Contents

OVERVIEW OF APPLIANCE
ASSEMBLING THE STAN
HANDLING THE APPLIANCE
POWER
SPEED
MODE
TIMER (0.5 – 7.5 HOURS)
CLEANING AND MAINTENANCE
DISPOSAL
SPECIFICATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOMCOM 824-012V70SR Oscillating Tower Fan Instruction Manual

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center,Our contact details are below:

When using electric devices, basic safety precautionsmust be observed. To avoid the risk of burns, electric shocks, fire, and/or personal injury, please read the instruction manual carefully before using the device, andobserveallofthe instructions during the operation of the device.

GENERAL GUIDELINES

Electronic devices are not toys! Keep children away from the device!
Only use the devices for its intended purpose.
The device is only suitable for use in private households and not for commercial use.
Do not leave the device unsupervised whileinuseorconnected to the mains.
Switch off the device if it is not in use, in the event of malfunctions and for cleaning, and also remove the power plug.
Do not carry the device by the power cord.
Keep the device clean and dust-free.
Never use the device outdoors.
Check the device regularly for signs of visible damage.Do Not use the device if you have determined damage, if the device has fallen down or if it does not function properly.Do Not attempt to repair the device yourself.
Repairs are only allowed to be carried out by qualified specialists.
The power point must be located near to thedevicesothatthe plug can be removed easily in an emergency.

HAZARDS DUE TO ELECTRIC CURRENT

The voltage stated on the name plate of the device must agree with the voltage of your mains electricity network.
Only connect the device to a power socket that has been installed properly. Do not use a power stripor anextensioncable.
Never operate the device using a timer or another remote contract device
Never touch the device, the power cable and plug with damp or wet hands or if you are standing on wet ground.
Do not place the power cord in the sink.
Do not immerse in water.
Immersing the device in water or other fluidsleadstoarisk to life of electric shock!
Keep the device, the power cable and plug away from hot surfaces, naked flames, direct sunlight and sharp edges.When using the device make sure that the cable is not jammed (e.g. in doors).
When you pull the plug out of the power socket, always pull on the plug and never on the cable.
If the power cable of this device is damaged it has to be replaced by a correspondingly qualified person to prevent hazards. The same applies to the plug

HAZARDS TO PEOPLE

These devices can be used by children aged8yearsandabove and by people with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge, if they are supervised or instructed in safe use of the product and understand the hazards involved.Children must not play with the appliance

Cleaning and maintenance of the product must not be performed by children.
Children do not recognise the hazards which canaries when handling electrical devices. Keep children away from the device. Pay particular attention when using the device if children are in the vicinity!
Keep the packaging materials such as plastic bags and polystyrene parts out of the reach of children. Danger Of Suffocation!
When laying the cable make sure that it cannot become a tripping hazard.
Make sure that the device itself cannot be tripped over.

ARTICLE-SPECIFIC HAZARDS

Make sure that the device isn’t dirty and that it is assembled correctly
Never operate the appliance on uneven surfaces or the vicinity of steps. Avoid tipping the device over whenitisinuse (e.g. if there are borders on the floor).
The pedestal fan may only be used, if it is fully assembled.Check all screw / plug connections at regular intervals.Tighten loose screws and ensure that plug connections are properly adjusted.

OVERVIEW OF APPLIANCE

Overview

Air outlet grating
Holder
Time
Speed
Mode
Oscillation
ON/OFF
Power plug
Stand
Screws
Remote control

ASSEMBLING THE STAN

Take all of the appliance parts out of the packaging and remove all packaging materials and inserts.
Turn the fan upside down so that you can look at the holder (2). (Fig.1)
Put the part.1 (Fig.2) of the stand (9) , and use 1 piece of screw to tight up,see the methods by (Fig.3).
Take the power cord to cross the part.2 (Fig.2) stand (9), andpress it into the outlet hole.
Put the part.2 of the stand(9), (Fig.2), and press it into the part.1(Fig.2),use 2 pieces of screw to tight up, see the methods by (Fig.4).

HANDLING THE APPLIANCE

POWER

Press the button of ON/OFF (7), to select power on / off the appliance.

SPEED

Press the button of ON/OFF (7) , to power on the appliance.
Press the button of Speed (4), to select the fan speed.
3 speed for select: (Low – Mid – High)

MODE

Press the button of ON/OFF (7) , to power on the appliance.
Press the button of MODE (5), to select the fan mode.
3 mode for select: (NORMAL / NATURE / SLEEP).
The default mode is NORMAL, and the SLEEP/NATUREmode with the indicator be light up

TIMER (0.5 – 7.5 HOURS)

Press the button of ON/OFF (7) , to power on the appliance.
Press the button of TIMER (3) to the desired time period(0.5-7.5Hours)
It will now remain in operation until the selected period of time runs out
After the timer runs over , the device will turn off

OSCILLATION

Press the button of ON/OFF (7) , to power on the appliance.
Press the button of OSCILLATION (6), appliance will swing from Left to Right.

REMOTE CONTROL

All the function above can be setting by remote control

CLEANING AND MAINTENANCE

Before cleaning the appliance always disconnect the power plugfromthe receptacle

The appliance, the power cord and the power plug should not be immersed in water or other liquids when you are cleaning them. Cleanthemwithadrycloth.
If it is very dirty, the outside of the appliance can be wiped careful with moist cloth and then dried carefully. Make sure that no moisture penetrates into the interior of the appliance.
Do not use any harsh cleaners, steel brushes, scouring powder or other hard objects to clean the appliance as these can cause scratches on surfaces.
Clean the appliance regularly.
Never use solvents, benzene or oil-based cleaners as thesecandamagethehousing.
Re-tighten visible screw connections on the appliance regularly order ensure that the device is functioning properly

DISPOSAL

Used electric household devices

If you do not want to use your electrical appliance any longer, return it free of charge to a recycling depot for used electric appliances.
Used electric devices do not belong in the household garbage(see symbol).

Further disposal instructions

Return the electrical appliance in such a condition that itslaterre-use or recycling is not adversely affected. Batteries Must Be Removed in advance and the destruction of parts which contain fluids must be avoided.
Electrical appliances can contain harmful substances. Improper Handling or damage to the appliance can lead to health problems or water or ground contamination, when the appliance is recycled water