Kindermann 5317SP000x Multimedia Lectern Instruction Manual

Speech Point3
Multimedia lectern
Item-No. 5317SP000x
Assembly and operating instructions

08.2022

Attention!
Non-observance of the following operating instructions can lead to injuries or damage to the device!

**** Basic safety instructions

• Please read these instructions carefully and keep them in a safe place.

• The installation of electrical media devices and the connection of the mains connections may only be carried out by qualified and instructed personnel.

• Before any drilling work, please make sure whether and where concealed lines are located in the drilling area.

• Power lines must not be exposed to the risk of damage.

• The mains connection must be connected to an earthed socket.

• The total power consumption of all connected consumers must not exceed 2500 W.

• Have damaged power cords replaced immediately to avoid danger to users.

• The SpeechPoint3 may only be operated in closed and dry rooms.

• Do not expose this device to dripping or splashing water.

• Always choose a level, stable surface. The lectern must be perpendicular.

• Lay the cables to the device in such a way that they do not pose a tripping hazard and cannot be damaged.

• Caution. Danger of crushing body parts or objects by moving lift!

• Do not place any objects in the travel path of the lift.
  Warning
  Risk of crushing with lift in motion

  do not bring limbs into the working area of the lift

• Make sure that safety stickers are not covered and are always clearly legible.

• As a matter of principle, no safety devices may be permanently dismantled or put out of operation. (e.g. the inspection flaps on the rear).

• When working on the Speech Point³ , the power supply must be disconnected (pull out the power plug).

• Improper installation or maintenance work may result in considerable danger to the user!

• Do not use any aggressive, alcoholic or abrasive cleaning agents.

• Use mild cleaning agents. Please remove water and cleaning agent residues immediately with a soft cloth.

• The ventilation and exhaust openings must not be covered or closed.

** Only devices that are ready to be plugged into a 230V socket!
2.1. General description**

The Speech Point³ is a multimedia lectern. It offers numerous possibilities to integrate technology. It contains enough space for built- in (touch) monitors, integrated computers, laptops and tablets. Laptops brought along can be quickly supplied with power and data via the cable feed-throughs on the side.
An optional, integral media control system can be used to control the essential functions, e.g. projector, lighting, dimming, air conditioning, audio system, microphones, video conferencing system, etc., in a larger conference room or lecture hall.
The ergonomically inclined desk top is equipped with a leather application as well as a document stop as standard.
An interactive display can be integrated as an option. The desk top can be closed or simply raised for access to cables or additional storage space. A fitting ensures that the desk top is automatically held open in a horizontal position.
This means that the desk surface can also be used for notebooks. A lateral (-)pull-out shelf is available, for example, for the use of a computer mouse or as a surface for laptops and tablets.
The lower, lockable access panel (on the speaker side) allows cables to be easily routed into the desk through two floor openings.
In addition, the main connection, the lifting column control, and other connections (230V) are located here. Additional technology can be easily integrated through the lockable access panels at the rear. For optimal access, the desk must be moved to the top position.
Due to the steeples motorized height adjustment, with a stroke of approx. 28 cm, the work surface can be optimally adjusted to each speaker. Barrier-free access is possible.
Mobility is provided by four castors, the rear two with parking brakes, if required.
A logo and name badge holder can be attached to the front (optional).
The indirect RGB front lighting (optional) allows the desk to be illuminated in any desired color, e.g. the company color, using LED technology, and can thus be used to optimally stage events as desired.
2.2. Intended use
The Lectern is intended to be used as a lectern and for presenting audio and video content indoors.
Any use beyond this is considered improper use. The operator of the lectern is solely liable for the operator of the lectern is solely liable for any resulting damage.

Scope of delivery

• SpeechPoint³ lectern
• Instruction manual
• Connection cable 3 m (pre-installed)
• Additional accessories depending on optional equipment variant

Part designation and explanation of symbols

Commissioning

5.1 Display mounting

5.2 Additional equipment
5.2.1 Desk top

5.2.2 Console

Optional accessories:
• Shockmount| 5315TP0106
• Connector panel CP frame 4-fold| 7449000022
• Desk light| 5310000000
• Ambient LED front lighting| 5317SP0100
• Logo mounting| 5311TP0103

Further special equipment on request:
Matching projectors, displays, visualizers, document camera, touch displays, media controls, control panel, wireless systems (click & show), microphones, RFID locking system etc. see www.kindermann.com
5.3 Installation of additional media technology
Attention: The installation of media technology components must be carried out by trained and instructed personnel!
Basically, electrical components are permanently installed in the lectern.
Connect the devices to the power supply (socket strip in the console) or connect them to other devices with appropriate control and signal lines.

1. Move the lectern to the uppermost position.
2. Then disconnect the power supply from the mains (pull out the mains plug).
3. For optimum access, open the two inspection accesses at the rear and the desk plate at the top. (key included in the scope of delivery)
4. Install all desired components such as displays, media controls, amplifiers, etc. The total power must not exceed 2500W!
5. Then check all cables for correct fit. No cable or component may be damaged by moving the console!
6. Reconnect the console to the power supply.
7. Move the console all the way down. Check the interior for possible damage to the installed components and cables during the downward movement and repair if necessary.
8. When the installation is complete, close the inspection doors again.
9. The console is now ready for operation.

Technical data – SpeechPoint³

20° inclination
Microphone connector (opt.)| Impact sound decoupled, XLR 3-pole, with integrated sealing cap
Laterally extractable Shelf on the underside| approx. 40 x 26 cm (WxD) max.10 kg loadable, can be used on the right or left with recessed grip
Storage under the desk panel| approx. 50 x 60 x 6 -12 cm. (WxDxH), 4-fold cable holder, two lateral cable outlets
Lower technical compartment (lockable)| usable inner dimensions approx. 55 x 25 x 40 cm (WxDxH)
Upper technical compartment (lockable)| usable inner dimension approx. 50 x 25 cm (WxD) height adjustment, electric approx. 28 cm, max. 30 kg additional weight permitted!
Castors| 4 swivel castors, 2 of them lockable
Integrated passive ventilation|
Power supply| 230 VAC with Schuko connection cable 3 x 1.5 mm2, 3 m 1 x 6-fold socket strip; total power max. 2500 W
Basic structure| high quality coated wood composites and sheet steel components, powdered
Decor and colour| Exterior decor premium white RAL 9003 or light gray RAL 7047, sheet steel powder-coated aluminum RAL 9006, other decor and color combinations possible on request

Dimensions

Transport

**** Proper transport prevents damage to the furniture and protects people‘s bodies.
In a well-equipped state, the SpeechPoint³ weighs at least 65 kg.
The SpeechPoint³ must not be subjected to excessive loads on the outer shell, e.g. by carrying it.
Fastening screws may tear out or the outer surface may be damaged.
For on-site installation, the spatial conditions should correspond to the size and weight of the furniture, i.e. level access from the street, (freight) elevators in the building. i.e. level approach/access from the street, (freight) elevators in the house.
Thanks to the casters, the furniture can be easily transported to the installation site on flat surfaces.

CE Declaration of Conformity

https://shop.kindermann.de/erp/webshop/navigationPath/5317SP0001.html&request_locale=en_GB

Hint:
The current assembly instructions can be downloaded from our website: www.kindermann.com
The currently valid CE declaration can be viewed and downloaded at the following URL: https://shop.kindermann.de/erp/webshop/navigationPath/5317SP0001.html&request_locale=en_GB

5317 SP000x D/EN 2022-08
842 214 Änderungen vorbehalten
Subject to alterations
Printed in Germany
Linderman GmbH
Mainparkring 3
D-97246 Eisenstadt
E-Mail: [email protected] 
www.kindermann.com

References

• Kindermann GmbH
• SpeechPoint³ - white finish - Kindermann Webshop
• SpeechPoint³ - white finish - Kindermann Webshop

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>