SHOKZ C110 OpenComm 2 UC USB-C Wireless Headphone User Guide
- June 12, 2024
- SHOKZ
Table of Contents
SHOKZ C110 OpenComm 2 UC USB-C Wireless Headphone
ON/OFF
Turn on the headset
- Press and hold the Power/Volume+ Button for 2 seconds until the LED Indicator flashes blue.
Turn off the headset
- Press and hold the
- Power/Volume+ Button for 3 seconds until the LED Indicator flashes red.
Pairing to Mobile Device
Operate controls with your headset powered off.
- Start with your headset turned off.
- Press and hold the Volume+ Button until the LED Indicator flashes red and blue alternately
- Select “OpenComm2 UC by Shokz” on your device’s Bluetooth settings. Audrey will say, “connected”.
Pairing to PC
- Start with your headset turned on.
- Plug the included USB adapter into a USB port on your PC.
- Connection is established when Audrey says “connected”, and the LED Indicator on the USB adapter is solid blue.
Configure
To play music or take calls on the headset, please ensure the “Shokz Loop110” is both identified as the default input and output devices in your operating system’s audio settings.
Button
Reconnect to the last connected headset
How to Wear
Position the noise-canceling microphone close to your mouth.
Pairing to Mobile Device
Pairing to PC
Button
How to Wear
Multifunction Button
Please refer to the following for more details
userguide.shokz.net/opencomm2uc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>