SPECIALIZED Globe Passenger Seat Installation Guide
- June 12, 2024
- SPECIALIZED
Table of Contents
SPECIALIZED Globe Passenger Seat
Product Information
The Globe Passenger Seat is designed to provide a comfortable ride for a passenger when riding on a Globe bicycle. It is compatible with the Haul ST and Haul LT rear racks and can be attached in various orientations and combinations. The Haul ST can support a maximum of one seat, while the Haul LT can support up to two seats in combination with other accessories.
The seat is equipped with rubber feet that prevent it from sliding during riding. It also features tie straps and buckles for secure attachment to the rack. The seat base is designed to fit flush against the rack top, ensuring stability.
It is important to note that the Globe Passenger Seat should only be used with appropriate handlebars, footrests, and wheel covers. Misuse of the seat may result in serious personal injury or even death to the passenger and/or rider.
For more information on all Globe accessories, please visit www.globebikes.com.
Product Usage Instructions
- Place the seat on top of the rear rack in the desired location.
- Ensure that all the rubber feet are fully inserted inside the outer rack rails and not resting on top.
- Make sure the seat base is flush against the rack top.
- Ensure the tie straps and buckles are on the outside of the rack and not trapped underneath.
- The four rubber feet should fit perfectly between the MIK cross braces on top of the rack platform for a secure fitment.
- Thread the straps around the upper rack rails, under the top platform, and through the corresponding buckle.
- Pull the strap tight and fasten the Velcro tabs.
Safety Information
It is recommended to watch the informative assembly video guide for proper
assembly of the Globe passenger handlebar. Scan the provided QR code to access
the video.
Be aware of the maximum weight limits for the different models:
- HAUL ST (CARGO REAR): Maximum weight limit of 88 lb / 40 kg.
- HAUL LT (CARGO REAR): Maximum weight limit of 132 lb / 60 kg.
If you have any questions or need further assistance, please contact Rider Care at 877-808-8154 or visit www.globebikes.com for updates and addendums to the product manual.
Seat parts
| # | PART | DESCRIPTION |
|---|---|---|
| A | Passenger Seat | |
| B | Tie strap |
Velcro straps to attach the bicycle to the rack
C| Tie strap buckle
D| Rubber feet| Prevents the seat from sliding during riding.
E| Seat base|
The Globe passenger seat attaches to the Haul ST and Haul LT rear racks in
multiple orientations and combinations.
The Haul ST can support a maximum of one seat (1), and the Haul LT can support
two (2) seats in various locations in combination with other accessories.
WARNING! The Globe passenger seat is intended to provide a comfortable ride for your passenger when riding on your Globe bicycle. It must be used with appropriate handlebars, footrests, and wheel covers. Failure to follow this warning may result in serious personal injury or even death to the passenger and / or rider.
WARNING! Do not use the Globe Passenger Seat as a handhold or grip. The
Globe Passenger Seat is designed to be sat on only and may come loose if used
by your passenger as a handhold or grip. Failure to follow this warning may
result in serious personal injury or even death to the passenger and/or rider.
Visit www.globebikes.com for more information on
all Globe accessories.
Placement and fastening instructions
-
Place the seat on top of the rear rack in the desired location (A). Ensure that all the rubber feet are fully inserted inside the outer rack rails (B) and not resting on top and that the seat base is flush against the rack top.
-
Ensure the tie straps and buckles are on the outside of the rack and not trapped underneath.
The four rubber feet are spaced at a length and width to fit perfectly between the MIK cross braces on top of the rack
platform for the most secure fitment (C). -
Thread the straps around the upper rack rails (D), under the top platform, and through the corresponding buckle (E).
-
Pull the strap tight and fasten the Velcro tabs .
-
The tie straps are adjustable, allowing the buckle’s position to be moved. Some pad locations may place straps close to the fender and cause difficulty in fastening or removing the Velcro. Adjusting the tie strap may make it easier to access the buckle.
-
CAUTION: The seat can be installed so the rubber feet straddle the MIK rails and are not supported front-to-back by the rails (F). Installing the seat in this position may cause the seat to shift under acceleration. If the seat is installed in this orientation, ensure your passenger is holding the handlebar securely and is prepared for any acceleration.
-
The seat base has an asymmetrical design with no defined front and back to increase compatibility options. The seat may be placed in either direction along the rack.
-
In certain locations, the seat straps may interfere with a rack support. Rotating the seat 180° will move the straps to better locations.
Safety information
-
WARNING! The Globe passenger seat is intended for use on Globe bicycles only.
-
When using the passenger seat with the passenger handlebar, position the seat first, then position the passenger handlebar as close to the front of the seat pad as possible.
-
WARNING! Before your first ride and regularly thereafter,
ensure the passenger seat is secured to the rear rack. -
WARNING: The area where you ride may require specific safety devices. It is your responsibility to familiarize yourself with the laws of the area where you ride and
to comply with all applicable laws, including properly equipping yourself, your passengers, and your bicycle as the law requires. -
WARNING: You and your passenger must always wear
a cycling helmet that meets the latest certification standards and is appropriate for the type of riding you do. Most serious bicycle injuries involve head injuries that might have been avoided if the rider had worn an appropriate helmet. -
WARNING! Riding with passenger on your bicycle affects the handling by altering the center of gravity, weight, and balance. It may also negatively impact your cornering ability, increase your necessary stopping distance, and reduce your ability to slow down and maneuver, especially at higher speeds or down a steep grade. All of this can result in a loss of control, potentially causing serious injury and/or death. You should also become familiar with and practice riding with the passenger in a controlled environment away from traffic.
Online Video Guides
An informative and important video explaining how to properly assemble the Globe passenger handlebar is available by scanning the QR code. This assembly/setup guide is intended to be used together with the video.
Maximum weight limits
MODEL
| CARGO
---|---
REAR (lb / kg)
HAUL ST| 88 / 40
HAUL LT| 132 / 60
SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037
408-779-6229
0000190006 _AG_R1 08/22
We may occasionally issue updates and addendums to this document. Please
periodically check www.globebikes.com or contact
Rider Care to make sure you have the latest information. Info:
877-808-8154
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>