Globe Haul ST Wheel Protector Installation Guide

Haul ST Wheel Protector
Installation Guide

Globe Haul ST Wheel Protector
Assembly Guide

What’s included

Installing the finger guards may be easier with the rear wheel removed. Read the rear wheel removal and replacement section of the User Manual for more information on how to safely remove the rear wheel.
The tie straps ends should be tightened toward the outside of the frame. Failure to do so can make adjustment and removal more difficult.

Assembly Instructions

The wheel covers are mounted to the rear of your Globe bicycle using Velcro straps and the upper covers are clipped directly to each side of the rear fender.
The following instructions guide you through assembling the upper covers and wheel protectors securely to your bicycle. Install the upper cover

• Slide the upper cover (A) behind the frame and clip the cover onto the rear fender (B).
• Thread two zip ties (C) through the mounting holes (D) and secure the upper cover to the upper frame rail (E).

Install the wheel protector

• Thread three tie straps (A) between the upper frame rail and the  upper wheel.
• Slide the tie strap through the buckle (B). The wheel cover should hang loosely with approximately ¼ inch gap (C) between the cover and the frame then fix the upper tie straps (D).

Do not over-tighten the top straps as this causes difficulties tightening the lower and rear straps.

• Attach the three lower straps and fix them (E).
• Attach the rear strap and fix it (F).
• Check that all seven straps are properly tightened and secured.
• Repeat the process for the other side.

CAUTION: Over tightening may cause premature wear or tearing of the plastic cover.
The plastic buckles can rotate to provide a cleaner look. The bottom front strap and buckle may cause heal clearance issues when pedaling, make sure the buckle is out of the way.

Safety Information

WARNING! The Globe rear wheel protector is intended for use on Globe Haul Short Tail bicycles only.
WARNING! Before your first ride and regularly thereafter, ensure the rear wheel protectors are securely tightened.
WARNING: The area where you ride may require specific safety devices. It is your responsibility to familiarize yourself with the laws of the area where you ride and to comply with all applicable laws, including properly equipping yourself, your passengers, and your bicycle as the law requires.
WARNING! Riding with passenger on your bicycle affects the handling by altering the center of gravity, weight, and balance. It may also negatively impact your cornering ability, increase your necessary stopping distance, and reduce your ability to slow down and maneuver, especially at higher speeds or down a steep grade. All of this can result in a loss of control, potentially causing serious injury and/or death. You should also become familiar with and practice riding with the passenger in a controlled environment away from traffic.

Online Video Guides

An informative and important video explaining how to properly assemble the Globe upper wheel cover and rear wheel cover is available by scanning the QR code.
This assembly/setup guide is intended to be used together with the video.https://www.specialized.com/qrcode-globe-passenger-handlebar- assembly

SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037 408-779-6229
0000192104_AG_R1 10/22
We may occasionally issue updates and addendums to this document.
Please periodically check www.globebikes.com or contact Rider Care to make sure you have the latest information.
Info: 877-808-8154

References

• Globe Haul ST

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>