WEN 73162 2-Shelf Polypropylene Service Cart Instruction Manual

WEN 73162 2-Shelf Polypropylene Service Cart

Product Information

This product is a 2-shelf polypropylene service cart (Model 73162) designed for various applications. It has a total load capacity of 300 pounds, with 150 pounds evenly distributed on each shelf. The cart features four swivel casters, with two of them being locking casters for stability. The caster diameter is 4 inches, and they are non-marring to prevent damage to floors. The inner shelf dimensions are 27 inches x 16-1/4 inches x 3-3/4 inches, and the overall dimensions of the cart are 32 inches x 18-1/2 inches x 33-1/2 inches.

Product Usage Instructions

1. Assembly:
2. Identify the parts using the label and part number provided in the exploded view and parts list section of the manual.
3. Attach two shelves (Part A) to the legs (Part C) using the provided hex tool (Part I), nuts (Part D), and washers (Part E). Tighten the nuts securely.
4. Attach four covers (Part B) to the corners of the shelves using screws or any other appropriate fastening method.
5. Attach four holders (Part F) to the sides of the shelves, ensuring they align with the openings.
6. Install two casters (Part G) to the front side of the cart and two locking casters (Part H) to the back side. Secure them using screws or any other appropriate fastening method.
7. The assembly is now complete.
8. Operation:
9.  Ensure the cart is placed on a stable surface before loading.
10. To move the cart, push it gently from behind or pull it from the front using the handle provided by the shelves.
11. When not in use, ensure that the locking casters are engaged to prevent unintended movement. To engage the locking casters, push the lever down until it locks into place
12. To unlock the casters, simply lift the lever up. Ensure that the cart is stable before proceeding.
13. Do not exceed the maximum load capacity of 300 pounds or place unevenly distributed weight on the shelves.
14. Use caution when navigating the cart around corners or obstacles.
15. Regularly inspect the cart for any signs of damage or wear. Replace any damaged parts immediately to ensure safe operation.
16. When not in use, store the cart in a clean and dry area to maintain its condition. For any further assistance, technical support, or product-related questions, you can contact the manufacturer at 1-847-429-9263 (M-F 8AM-5PM CST) or via email at TECHSUPPORT@WENPRODUCTS.COM.

MAINTENANCE

• Check for loose hardware, misalignment of parts, cracked, broken, or bent parts, and any other condition that may make your cart unsafe before each use.
• Keep your Service Cart clean by wiping the surfaces off regularly. Dirt, oil, grease, and other debris can cause a potential safety hazard.

We advise keeping this instruction manual, saving the receipt by attaching it to the instruction manual, and recording the purchase date in this space:___ in case you need to exercise the 2-year warranty.

EXPLODED VIEW & PARTS LIST

SPECIFICATIONS

Marring
Inner Shelf Dimensions| 27 in. x 16-1/4 in. x 3-3/4 in. Each
Overall Dimensions| 32 in. x 18-1/2 in. x 33-1/2 in.

SAFETY

WARNING! When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

• Keep work area clean and well lit. Cluttered and dimly lit areas invite injuries.

• When not in use, the Service Cart must be stored in a safe and clean location. Always secure products and keep out of reach of children.

• Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Replace or repair damaged or worn parts immediately.

• When servicing, use only identical replacement parts. The use of any other parts will void the warranty.

• Do not exceed the product’s maximum load capacity of 300 lbs total; 150 lbs on each shelf, evenly distributed. Uneven weight distribution could cause tipping. Do not lean or climb on the Service Cart. Be aware of dynamic
  loading. Sudden load movement may briefly create excess load causing product failure.

• Only use on a flat surface capable of supporting the Service Cart and its maximum capacity load of 300 lbs. It is easy to lose control of the Service Cart if attempting to pull a load on a sloping or uneven surface.

• Do not allow children to play on, stand upon or climb on the Service Cart. The Service Cart is not for carrying people or animals.

• Always check hardware and assembled parts after assembling. All connections should be tight and hardware properly tightened.

WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that might occur. Always use common sense and caution when using the cart.

GET TO KNOW YOUR SERVICE CART

ASSEMBLY

See the “Get to Know Your Service Cart ” section

1. Remove all parts and hex tool from the box.

2. Place the bottom shelf upside down on the floor. Insert a holder into each of the four openings located on the corners of the shelf. Use a rubber hammer (not included) to secure them into place; there should be no space where
   the holders and base meet.

3. Push a nut into the hex tool and set aside. Propping the shelf on its side, insert a caster through the hole in the holder and the base assembly. Place a washer onto the thread of the caster shank. Take the loaded hex tool and turn
   right to secure the nut onto the thread of the caster shank. Repeat with all four casters, making sure that the two non-locking casters and the two locking casters are on the same short sides as each other. See Fig. 2.
   NOTE: To fully tighten the nuts, use a 17mm socket and a socket wrench or impact driver.

4. Set the assembled base down with wheels touching the floor. Push the four legs into the openings located on the corners of the base. Tap them into place with a rubber hammer.

5. Take the top shelf and align the legs with the openings in the corners of the shelf. Tap the four corners of the top shelf with a rubber hammer to fasten the top shelf to the legs.

6. Push the four covers into the openings on the corners of the top shelf. Tap into place with a rubber hammer.

7. Make sure all connections are flush and hardware is tightly fastened. Roll the cart to make sure that the casters roll properly.

8. Your service cart is now ready for use. Do not exceed the total load capacity of 300 lbs, evenly distributed.

OPERATION

Before operation, you must assemble your Service Cart following the instructions above.

1. On a level surface, with the rear casters locked, begin placing objects onto your service cart. Remember to distribute items evenly; uneven weight distribution could cause the cart to tip.
2. Unlock the rear casters and begin rolling the cart.
3. When stopped, lock the rear casters and unload the cart.

NOTE: Make sure the locking casters are in the OFF/unlocked position before attempting to push the Service Cart, otherwise you can risk damaging the casters.

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-847-429-9263 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>