TORQUE FITNESS 5586101-F TANK M4 Installation Guide
- June 12, 2024
- TORQUE FITNESS
Table of Contents
TANK
Assembly Guide
VERSION: XTTM4-PH & XTTM4GT-PH
PART #: 5586101-F
5586101-F TANK M4
| ITEM | PART NUMBER | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 5585401 | ASSY, TWO BRAKE FRAME | 1 |
| 2 | 5553001 | WHEEL, 12″ DIA X 3.5 WIDE | 4 |
| 3 | 2011201 | WASHER, STEEL 12.7 ID-40 OD-4 THK CLEAR ZINC | 4 |
| 4 | 2010901 | WASHER, LOCK M12 SAE ST ZN | 12 |
| 5 | 2011301 | SCREW, M12-1.75 X 30L SOC HD GR 12.9 CLEAR ZINC | 4 |
| 6 | 55726PA | PTD ASSY, RIGHT PUSH HANDLE | 2 |
| 7 | 55724PA | PTD ASSY, LEFT PUSH HANDLE | 2 |
| 8 | 5572101 | WLDMT, HOR PUSH HANDLE | 2 |
| 9 | 2010501 | WASHER, STEEL 10.5 ID-20 OD-2 THK CLEAR ZINC | 4 |
| 10 | 2012801 | SCREW, M10-1.5 X 25L SOC HD GR 12.9 CLEAR ZINC | 4 |
| 11 | 2010801 | WASHER, STEEL 12.7 ID-25 OD-2 THK CLEAR ZINC | 8 |
| 12 | 2010701 | SCREW, M12-1.75 X 85L SOC HD GR 12.9 CLEAR ZINC | 8 |
| 13 | 56024PA | PTD ASSY, TANK WEIGHT HORN | 2 |
| 14 | 5433701 | SPACER, FLANGE (OPTIONAL) | 8 |
| 15 | 5602701 | BUMPER, TANK (OPTIONAL) | 4 |
| 16 | XTSA-101 | TANK SWIVEL ATTACHMENT (OPTIONAL) | 1 |
| 17 | XTM4-RPK-101 | RAIL PULL KIT, TANK M4 | 1 |
NOTE:
SECURELY tighten all bolt connections in this step.
NOTE:
After this step has been completed, SECURELY tighten all bolt connections in
this step and previous step.
CHAIN AND BELT ADJUSTMENT
CHAIN ADJUSTMENT
NOTE:
The chain tension on TANK is pre-set at the factory. However, if the chain
becomes too loose or is too tight, then please follow the steps in numbered
numbered order to adjust.
BELT ADJUSTMENT
NOTE:
The belt tension on TANK is pre-set at the factory. However, if belt is too
loose or starts to slip, then please follow this step.
CHAIN AND BELT ADJUSTMENT
XTWHK WEIGHT HORN KIT (OPTIONAL)
NOTE:
SECURELY tighten all bolt connections in this step.
Handles have been hidden for assembly clarity.
NOTE:
Handles have been hidden for assembly clarity.
NOTE:
SECURELY tighten all bolt connections in this step.
Handles have been hidden for assembly clarity.
RPK RAIL PULL KIT (OPTIONAL)
INSPECTION & LUBRICATION
INSPECTION:
Recommended tire inflation: 30 PSI
Once a month, check for loose bolts on handles, wheels and weight horns
(optional) as indicated.
Tighten if necessary.
Once a month, check that the chain and sprockets are clean, free of rust, dust
and grime. Make sure that the chain is properly lubricated. If chain is loose,
retighten chain as outlined on page 9.
Once a month, inspect belt. Make sure the belt is not worn, frayed or loose.
Replace belt if worn or frayed.
If belt is loose, re-tension belt as outlined on page 10.
LUBRICATION:
Once a month, the sprockets should be cleaned and the chain should be
lubricated.
RECOMMENDED LUBRICATION: Use a Dry lubrication for indoor use, and wet
lubrication for outdoor use. Most bicycle shops carry a variety of different
lubricants and can recommend a lubricant based on the conditions where the
TANK will be used.
TANK PRODUCT LABELS – NOTICES
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>