acer NITRO VGO Series LCD Monitor User Guide

NITRO VGO Series LCD Monitor

User Guide

Important safety instructions

Please read the following instructions carefully.

1. Cleaning the LCD display screen: first, ensure that the power adapter you are using matches electrical standards for your region.
   • Turn off the LCD monitor and unplug the power adapter.
   • Spray a solvent-free cleaning solution onto your rag and gently wipe the screen.
   • Never spill any liquid directly onto or into the screen or its case.
   • Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case.
   • Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

2. Do not place the LCD display near a window. Exposure to rain, moisture, or direct sunlight can cause serious damage to the device.

3. Do not press on the LCD screen. Excessively forceful pressing can cause permanent damage to the display.

4. Do not remove the case or attempt to repair the machine by yourself. All maintenance tasks should be performed by an authorized technician.

5. Store the LCD display in a room with a temperature between -20°C-60°C (-4°F-140°F). Permanent damage may result if the LCD display is stored outside of this range.

6. Unplug the monitor’s power adapter immediately and contact an authorized technician if:
   • The signal cable between the monitor and the computer is worn or damaged.
   • Liquid spills onto the LCD display or the display is exposed to rain.
   • The LCD monitor or case is damaged.

Attaching the monitor base

1. Unpack the monitor base and place the base on a smooth work surface.
2. Unpack the monitor.
3. Attach the monitor stand arm to the base.
   • Make sure the base snaps into the monitor stand arm. (Selected models only)
   • Use a screwdriver to turn the black screw to secure the arm to the display. (Selected models only)

Connect the monitor to your computer

1. Turn off your computer and unplug the power cord.

2. 2-1 Connect Video Cable
   a. Make sure both the monitor and computer are powered-OFF.
   b. Connect the VGA cable to the computer. (Optional)
   2-2 Connect HDMI Cable (Only HDMI-input model) (Optional)
   a. Make sure both the monitor and computer are powered-OFF.
   b. Connect the HDMI cable to the computer.
   2-3 Connect DP Cable (Only DP-input model) (Optional)
   a. Make sure both the monitor and computer are powered-OFF.
   b. Connect the DP cable to the computer.

3. Connect the Audio cable (only Audio input model) (optional)

4. Connect the USB Type C Cable (only USB Type C input model) (Optional)

5. Insert the monitor power cable into the power port at the back of the monitor.

6. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

7. Select Power-off USB charge ON/OFF to enable/disable Power-off USB charge function. (Optional)

–| Note: The location and names of the sockets on the monitor may vary according to monitor model, and some sockets may not  available for some models.
---|---
HDMI (optional)| (optional)
VGA IN (optional)| USB (optional)
AUDIO IN (optional)| DP (optional)
AUDIO OUT (optional)| USB Type C (optional)

External control

Amber indicates standby/power saving mode.
2| Hotkey 1, 2 buttons| Press to activate user defined hotkey function.
3| Input button| Press to toggle input sources.
4| Navi/OK button| Press to activate the OSD menu, then use it as directional key to highlight the desired function.
Press it again to enter a selection.

SPECIFICATION

HDMI (Only HDMI-Input Model) (Optional)
Input Video Signal| Analog: 0.7 Vp-p (standard), 75 OHM, Positive HDMI (Only HDMI-Input Model) (Optional)
Speakers| 2 W x 2 (Only Audio-Input Model) (Optional)
Maximum Screen Size
Horizontal: 479 mm| Vertical: 260 mm
Power Source| INPUT: 100-240 V-50/60 Hz
Environmental Considerations| Operating Temp: 0° to 40°C Storage Temp: -20° to 60°C Operating Humidity: 20% to 80%
Dimensions| 492.2(W) x 378.6(H) x 221.3(D)mm
Weight (N. W.)| 2.70 kg (net)
Mechanism Specifications| Tilt: -5° to +20°
Swivel: No
Height adjustment: No
Pivot: No
Detachable foot stand: Yes
External Controls| Switch/Buttons| Power Button Input
Hotkey 1 MenulNavi/OK
Hotkey 2
Functions| Brightness Refresh Rate NM
Contrast VRB
Low Blue Light Aim Point
Black Boost Language
ACM OSD Timeout
Super Sharpness Transparency
Auto Config OSD Lock
H. Position Input
V. Position Auto Source
Focus Hot Key Assignment
Clock Wide Mode
Gamma DDC/CI
Color Temp. HDMI Black Level
Modes Quick Start Mode
sRGB Mode Information
Grayscale Mode Reset All Settings
6-axis Hue 6-axis Saturate
Volume
Mute
Over Drive Resync
Specifications vary depending on model and/or region.

Find manuals and other documents for your Acer product on the official Acer support website.

https://eprel.ec.europa.eu/qr/401646

Acer Incorporated
8F, 88, Sec. 1, Xintai Sth Rd, Xizhi
New Taipei City 221, Taiwan

Declaration of Conformity

We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
And,
Acer Italy s.r.1.
Veale dell Industries 1/A, 20044 Arese (MI), Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913 www.acer.it

(“x” =0-9,a~z, A~ Z, or blank)

We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as  below Directive and following harmonized standards and/or other relevant standards have been applied:

EN55032:2015+A1: 2020 Class B
EN IEC 61000-3-2:2019+A1:2021 Class D
EN 55035:2017+A11: 2020
EN 61000-3-3:2013+A1:2019
LVD Directive: 2014/35/EU
EN 62368-1: 2014+ All: 2017
RoHS Directive: 2011/65/EU
EN IEC 63000: 2018
ErP Directive: 2009/125/EC
(EU) 2019/ 2021: EN 50564:2011
Year to begin affixing CE marking: 2022.

RU Jan / Sr. Manager
Acer Incorporated (Taipei, Taiwan)
Apr. 4, 2022
Date

Acer America Corporation
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110
U.S.A.
Tel :254-298-4000 
Fax :254-298-4147
www.acer.com
Federal Communications Commission

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>