TORQUE FITNESS XTM1-DC-101 Tank M1 Dumbbell Cradle User Guide
- October 30, 2023
- TORQUE FITNESS
Table of Contents
TORQUE FITNESS XTM1-DC-101 Tank M1 Dumbbell Cradle
TANK M1 Dumbbell Cradle Assembly Guide
Version: XTM1-DC-101
Compatible with XTTM1-RPH-102, XTTM1-RPH-103, XTTM1-RPH-101 (requires
push/pull bar replacement kit).
Assembly Instructions
- Loosen and remove bolts (4) from the dumbbell cradle attachment. Keep the hardware for reuse in the next step.
- Reuse the bolts (4) from the previous step and securely tighten all bolts in this step. Repeat for both left and right sides. Ensure that the R and L label on the dumbbell cradle matches with the R and L label on the rear frame.
- Carefully place a dumbbell (max weight 25 lb) into the cradle. The latch will engage when the dumbbell is placed in the cradle. To remove the dumbbell, press the latch in the direction shown and lift the dumbbell straight out of the cradle.
- Dumbbells may be stored in the cradles while using the TANK. This may reduce tire slippage and skidding depending on the surface used. However, do not adjust the push/pull bar with dumbbells stored in the cradle. Always remove dumbbells before adjusting. Dumbbells cannot be stored in the cradle when the push/pull bar is in the park position.
Contact Information
If you have any sales-related inquiries, please email us at sales@torquefitness.com. For service-related inquiries, please email us at service@torquefitness.com.
Torque Fitness
11201 Xeon Street NW Ste 101
Coon Rapids, MN USA 55448
COMPATIBLE WITH XTTM1-RPH-102, XTTM1-RPH-103
XTTM1-RPH-101 REQUIRES PUSH/PULL BAR REPLACMENT KIT.
DUMBBELL CRADLE ATTACHMENT
Torque Fitness
11201 Xeon Street NW Ste 101
Coon Rapids, MN USA 55448
www.torquefitness.com
763-754-7533 (8:30 am – 5:00 CST).
For sales : sales@torquefitness.com
For service:
service@torquefitness.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>