carmanah MX 200 Top of Pole Mount Kit Installation Guide
- June 12, 2024
- carmanah
Table of Contents
MX 100 & 200 TOP OF POLE MOUNT KITS INSTALL GUIDE
LEVEL 4
MX 200 Top of Pole Mount Kit
NOTE: Depicted assembly order does not include cable routing steps and be
modified to suit preference.
-
Obtain wedge casting and adhesive gasket strip included with power module and install gasket strip along top edge as shown.
Failure to apply gasket could result in water entry and product damage.
-
Thread supplied bolts partially into top of pole casting. Note location of longer bolt on large casting.
-
Fully thread wedge casting into top of pole casting.
-
Install on pole and orient power module per LEVEL 2 instructions.
On square posts, this requires partially unthreading wedge casting. -
Tighten all seven casting bolts.
-
Fasten solar power module (not shown) to wedge casting per LEVEL 2 guide.
NOTE: READ ALL INCLUDED INSTALL GUIDES BEFORE SYSTEM INSTALLATION
Carmanah Technologies Corp.
250 Bay St, Victoria, BC V9A 3K5, Canada
1.250.380.0052
customersupport@carmanah.com
carmanah.com
References
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
- Systems for Traffic Beacons and Signs | Solar LED Beacons | Carmanah
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>