tp-link Archer AX90 AX6600 Tri-Band WiFi 6 Router User Guide

: May 16, 2024
: tp-link

tp-link Archer AX90 AX6600 Tri-Band WiFi 6 Router

Product Specifications

Model: AX6600 Tri-Band Wi-Fi 6 Router Archer AX90
Color: Black
Wireless Standard: Wi-Fi 6
Frequency Bands: Tri-Band (2.4 GHz, 5 GHz, and 5 GHz)

Chapter 1: Get to Know About Your Router

Product Overview

The AX6600 Tri-Band Wi-Fi 6 Router Archer AX90 is a
high-performance router that provides fast and reliable internet
connectivity. It supports the latest Wi-Fi 6 standard, allowing for
faster speeds and improved network efficiency.

Appearance

Top Panel
The top panel of the router features LED indicators that display the status of the router’s various functions, such as power, internet connectivity, and wireless signal strength.

Back Panel and Side Panel
The back panel and side panel of the router are equipped with various ports and buttons, including WAN port, LAN ports, USB ports, power button, and reset button. These ports and buttons allow you to connect your devices to the router and control its settings.

Chapter 2: Connect the Hardware

Position Your Router
Choose a central location for your router that is away from obstructions and interference sources. Place it at an elevated position for better signal coverage.

Connect Your Router
Follow these steps to connect your router:

Connect one end of the Ethernet cable to the WAN port of your router.
Connect the other end of the Ethernet cable to your modem.
Connect your computer or device to one of the LAN ports of the router using an Ethernet cable.
Plug in the power adapter into the router and connect it to a power source.
Power on the router using the power button.

Chapter 3: Log In to Your Router

To access the router’s settings and configuration, you need to log in using a web browser. Open a web browser and enter the default IP address of the router in the address bar. Enter your username and password when prompted to log in.

Chapter 4: Set Up Internet Connection

Follow these steps to set up your internet connection:

Log in to your router.
Navigate to the internet settings page.
Select your internet connection type (e.g., DHCP, PPPoE).
Enter the required information provided by your ISP.
Save the settings and test the internet connection.

Chapter 5: TP-Link Cloud Service

Register a TP-Link ID
To use TP-Link’s cloud service, you need to register a TP-Link ID. Follow the instructions provided in the user manual to create a TP-Link ID.

Change Your TP-Link ID Information
If you need to update your TP-Link ID information, such as email address or password, you can do so by accessing your TP-Link ID settings.

Manage the User TP-Link IDs

You can manage the user TP-Link IDs associated with your router. This allows you to control access and permissions for different users.

Add TP-Link ID to Manage the Router
To add a TP-Link ID to manage the router, follow the instructions provided in the user manual.

Remove TP-Link ID(s) from Managing the Router
If you want to remove a TP-Link ID from managing the router, access the TP- Link ID settings and follow the instructions to remove the desired ID.

Manage the Router via the TP-Link Tether App
You can also manage your router using the TP-Link Tether app. Download the app on your mobile device and follow the instructions to set up remote management.

Chapter 6: Wireless Settings

Specify Wireless Settings
You can customize your wireless settings, such as SSID, password, and security type, to create a secure and personalized wireless network.

Schedule Your Wireless Function
You can schedule the wireless function of your router to turn on or off at specific times. This can be useful for conserving energy or restricting access during certain periods.

**Use WPS for Wireless Connection

**

WPS (Wi-Fi Protected Setup) allows you to connect devices to your router without manually entering the Wi-Fi password. There are multiple methods to use WPS for wireless connection:

Connect via the Client’s PIN
If your device supports WPS via PIN, you can enter the client’s PIN in the router’s web interface to establish a wireless connection.

Connect via the Router’s PIN
If your router has a WPS PIN, you can enter it in your device’s Wi-Fi settings to connect to the router.

Push the WPS Button
You can also push the WPS button on the router and then select the WPS option on your device to establish a wireless connection.

Advanced Wireless Settings

The advanced wireless settings allow you to configure additional features and options for your wireless network, such as channel selection, transmission power, and beamforming.

Chapter 7: Guest Network

Create a Network for Guests
You can create a separate network for guests to provide them with internet access without compromising the security of your main network.

Customize Guest Network Options
You can customize various options for your guest network, including SSID, password, and access restrictions.

Chapter 8: USB Settings

Access the USB Storage Device

You can connect a USB storage device to your router and access its contents from your network-connected devices.

Access the USB Device Locally
To access the USB device locally, connect the USB storage device to one of the USB ports on the router and use the file explorer on your computer or device to access the files.

Access the USB Device Remotely

If you want to access the USB device remotely, you need to configure the remote access settings in the router’s web interface. Follow the instructions provided in the user manual to set up remote access.

Customize the Access Settings
You can customize the access settings for the USB storage device, such as setting up user accounts and permissions.

FAQ

Q: How do I update the firmware of my router?
A: To update the firmware of your router, log in to the router’s web interface and navigate to the firmware update section. Download the latest firmware from the manufacturer’s website and follow the instructions to install it.

Q: How many devices can connect to the router simultaneously?
A: The AX6600 Tri-Band Wi-Fi 6 Router Archer AX90 supports a large number of connected devices. The exact number may vary depending on the network conditions and device capabilities.

Q: Can I disable the LED indicators on the router?
A: Yes, you can disable the LED indicators on the router through the router’s web interface. Navigate to the LED settings section and follow the instructions to disable specific LEDs or adjust their brightness.

User Guide
AX6600 Tri-Band Wi-Fi 6 Router Archer AX90
© 2020 TP-Link 1910012880 REV1.0.0

About This Guide

This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs.
Note: Features available in the router may vary by model and software version. Router availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Router experience.

Conventions

In this guide the following conventions are used:

Convention

Description

Underlined

Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section.

Teal

Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc.

The menu structures to show the path to load the corresponding page. For

example, Advanced > Wireless > Guest Network means the Guest Network

function page is under the Wireless menu that is located in the Advanced tab.

Note:

Ignoring this type of note might result in a malfunction or damage to the device.

Tips:

Indicates important information that helps you make better use of your device.

· Click to edit the corresponding entry.

symbols on the web · Click to delete the corresponding entry.

page

· click to enable or disable the corresponding entry.

· Click to view more information about items on the page.

More Info
The latest software, management app and utility can be found at Download Center at https://www.tp-link.com/support/download/. The Quick Installation Guide can be found where you find this guide or inside the package of the router. Specifications can be found on the product page at https://www.tp- link.com. TP-Link Community is provided for you to discuss our products and share knowledge at https://community.tp-link.com. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support/.

1

Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition. Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, 1024-QAM, and HT160 require clients to also support the corresponding features. 2.5 Gbps internet speeds require compatible service plans and equipment. 2.5 Gbps and 1 Gbps ports cannot be concurrently configured as WAN ports. Saving clients’ battery power requires clients to also support the 802.11ax Wi-Fi standard. Actual power reduction may vary as a result of network conditions, client limitations, and environmental factors. Use of WPA3 requires clients to also support the corresponding feature. This router may not support all the mandatory features as ratified in Draft 3.0 of IEEE 802.11ax specification. *Further software upgrades for feature availability may be required.
2

Chapter 1
Get to Know About Your Router
This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: · Product Overview · Appearance

Chapter 1

Get to Know About Your Router

1 1 Product Overview
TP-Link AX router, with next-generation 802.11ax Wi-Fi Technology, achieves WiFi performance at its ultimate level. The revolutionary combination of OFDMA and 1024QAM improve throughput by 4 times and dramatically increase the whole network capacity and efficiency. It’s also backwards compatible with 802.11a/b/g/n/ac. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app.
1 2 Appearance

1 2 1 Top Panel

The router’s LED is located on the front. You can check the router’s working status by following the LED Explanation table.

LED Explanation

Status
Solid orange Pulsing orange
Solid red Pulsing red

Indication
The Wi-Fi is off. The system is starting up. No internet connection. The Wi-Fi is off and there is not internet connection.

4

Chapter 1

Get to Know About Your Router

Status
Solid blue Pulsing blue
Off

Indication
The router is working normally.
The firmware is being upgraded, WPS connection is being established, or the router is being reset. Do not disconnect or power off your router.
Power is off or the LED is turned off.

1 2 2 Back Panel and Side Panel

The following parts (view from left to right) are located on the back panel.

Button and Port Explanation

Item

Description

USB 2.0 Port

For connecting your USB storage devices to the router.

Power Port

For connecting the router to a power socket via the provided power adapter.

Power On/Off Button Press this button to power on or off the router.

Reset Button

Press and hold the button until the LED blinks to reset the router to its factory default settings.

2.5 Gbps WAN/LAN Port*

For connecting to your modem, the Ethernet outlet or other internet devices. Used as the WAN or LAN port.

1 Gbps WAN/LAN Port*

For connecting to your modem, the Ethernet outlet or other internet devices. Used as the WAN or LAN port.

LAN Port (1-3)

For connecting your PC or other wired devices to the router.

Note: The 2.5 Gbps WAN/LAN port and 1 Gbps WAN/LAN port cannot be used as the WAN port at the same time. If you choose to use 2.5 Gbps WAN/LAN port as the WAN port for internet service, the 1 Gbps WAN/LAN port will be used as LAN port by default. It’s recommended to use 2.5 Gbps WAN/LAN port as the WAN port.

5

Chapter 1

Get to Know About Your Router

The following parts are located on the side panel.

Button and Port Explanation

Item
USB 3.0 Port (WPS Button)
(Wi-Fi Button)

Description
For connecting your USB storage devices to the router.
Press this WPS button, and immediately press the WPS button on your client device to start the WPS process. The LED of the router should change from pulsing blue to solid on, indicating successful WPS connection.
Press and hold this button for about 2 seconds to turn on or off the wireless function of your router.

(LED Button)

Press the LED button to turn on or off the LED of your router.

6

Chapter 2
Connect the Hardware
This chapter contains the following sections: · Position Your Router · Connect Your Router

Chapter 2

Connect the Hardware

2 1 Position Your Router
· The product should not be located in a place where it will be exposed to moisture or excessive heat.
· Place the router in a location where it can be connected to multiple devices as well as to a power source.
· Make sure the cables and power cord are safely placed out of the way so they do not create a tripping hazard.
· The router can be placed on a shelf or desktop. · Keep the router away from devices with strong electromagnetic interference, such as
Bluetooth devices, cordless phones and microwaves.
2 2 Connect Your Router
Before you start: 1 ) Turn off your modem, if any, and remove the backup battery if it has one. 2 ) Place the router horizontally and orient the antennas vertically.
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the router’s 2.5 GHz WAN/LAN port to it, then follow steps 3 and 4 to complete the hardware connection.
1

Internet

3

2

1. Connect the powered-off modem to the 2 5 Gbps WAN/LAN port with an Ethernet cable.
Note: If you want to use the 1 Gbps WAN/LAN port as the WAN port instead, go to the Tether app or web management page to configure it.
2. Turn on the modem, and then wait about 2 minutes for it to restart.
3. Connect the power adapter to the router and turn on the router.
4. Verify the LED is solid on (red or blue) before moving on.

8

Chapter 2

Connect the Hardware

5. Connect your computer to the router. · Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below.

Ethernet cable

· Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network.

Computer
Connections are available

Smart Device
< Settings Wi-Fi

Wireless Network Connection

Wi-Fi

TP-Link_XXXX

CHOOSE A NETWORK…

TP-Link_XXXX_5G_1 TP-Link_XXXX_5G_2

OR
TP-Link_XXXX

TP-Link_XXXX_5G_1

Connect automatically

Connect

TP-Link_XXXX_5G_2

Other…

· Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your router through this method.
Note: · WPS is not supported by iOS devices. · The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device’s screen. Here we take an Android phone for instance.
2 ) Within two minutes, press the WPS button on your router.

9

Chapter 3
Log In to Your Router

Chapter 3

Log In to Your Router

With a web-based utility, it is easy to configure and manage the router. The web-based utility can be used on any Windows, Mac OS or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log in to your router.
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Visit http://tplinkwifi.net, and create a login password for secure management purposes. Then click Let’s Get Started to log in.

Note: · If the login window does not appear, please refer to the FAQ Section.
11

Chapter 4
Set Up Internet Connection
This chapter introduces how to connect your router to the internet. The router is equipped with a web-based Quick Setup wizard. It has necessary ISP information built in, automates many of the steps and verifies that those steps have been successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections: · Use Quick Setup Wizard · Quick Setup Via TP-Link Tether App · Manually Set Up Your Internet Connection · Set Up the Router as an Access Point · Set Up an IPv6 Internet Connection

Chapter 4

Set Up Internet Connection

4 1 Use Quick Setup Wizard
The Quick Setup Wizard will guide you to set up your router.
Tips: If you need the IPv6 internet connection, please refer to the section of Set Up an IPv6 Internet Connection.
Follow the steps below to set up your router. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Follow the step-by- step instructions to complete Quick Setup configuration or go
to Advanced > Quick Setup for configuration to connect your router to the internet. Then follow the step-by-step instructions to connect your router to the internet. 3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, and more.), log in with your TP-Link ID or click Sign Up Now to get one. Then follow the instructions to bind the cloud router to your TP-Link ID.

Note: · To learn more about the TP-Link Cloud service, please refer to the TP- Link Cloud Service section. · If you do not want to register a TP-Link ID now, you may click Skip to proceed. · If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,
all your wireless devices must use the new SSID and password to connect to the router.
4 2 Quick Setup Via TP-Link Tether App
The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search “TP- Link Tether” or
simply scan the QR code to download and install the app.
13

Chapter 4

Set Up Internet Connection

OR
2. Open the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
3. Tap the + button and select Router > Wireless Router. Follow the steps to complete
the setup and connect to the internet. 4. Connect your devices to the newly configured wireless networks of the router and
enjoy the internet!
4 3 Manually Set Up Your Internet Connection
In this part, you can check your current internet connection settings. You can also modify the settings according to the service information provided by your ISP. Follow the steps below to check or modify your internet connection settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Internet. 3. Select a port for internet service. Make sure the cable is securely connected to this
port on your router.

4. Select your internet connection type from the drop-down list.
5. Follow the instructions on the page to continue the configuration. Parameters on the figures are just used for demonstration. 14

Chapter 4

Set Up Internet Connection

1 ) If you choose Dynamic IP, you need to select whether to clone the MAC address. Dynamic IP users are usually equipped with a cable TV or fiber cable.

2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields.
3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems.
15

Chapter 4

Set Up Internet Connection

4 ) If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen.

5 ) If you choose PPTP, enter the username and password, and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen.
16

Chapter 4

Set Up Internet Connection

6. Click Save.
Tips: · If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page,
please go to Advanced > Network > Internet to complete the configuration. · If you still cannot access the internet, refer to the FAQ section for further instructions.
4 4 Set Up the Router as an Access Point
The router can work as an access point, transforming your existing wired network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System > Operation Mode, select Access Point and click Save. The
router will reboot and switch to Access Point mode.

17

Chapter 4

Set Up Internet Connection

3. After rebooting, connect the router to your existing wired router via an Ethernet cable. 4. Log in again to the web management page http://tplinkwifi.net, and go to Advanced

Quick Setup. 5. Configure your wireless settings and click Next. 6. Confirm the information and click Save. Now, you can enjoy Wi-Fi.
Tips: · Functions, such as Parental Controls, QoS and NAT Forwarding, are not supported in the Access Point mode. · Functions, such as Guest Network, are the same as those in the Router mode.
4 5 Set Up an IPv6 Internet Connection
Your ISP provides information about one of the following IPv6 internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > IPv6. 3. Enable IPv6 and select the internet connection type provided by your ISP.
Tips: If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP.
4. Fill in information as required by different connection types. 1 ) Static IP: Fill in blanks and click Save.
18

Chapter 4

Set Up Internet Connection

2 ) Dynamic IP(SLAAC/DHCPv6): Click Advanced to input further information if your ISP requires. Click Save and then click Renew.
3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advanced to input further information if your ISP requires. Click Save and then click Connect.
Note: If your ISP provides two separate accounts for the IPv4 and IPv6 connections, manually enter the username and password for the IPv6 connection.
19

Chapter 4

Set Up Internet Connection

4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set Up Your Internet Connection). Click Advanced to input further information if your ISP requires. Click Save and then click Connect.
5 ) Pass-Through (Bridge): Click Save and skip to Step 6. 20

Chapter 4

Set Up Internet Connection

5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save.

6. Click Status to check whether you have successfully set up an IPv6 connection.
Tips: Visit the FAQ section if there is no internet connection.

21

Chapter 5
TP-Link Cloud Service
TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app. To ensure that your router stays new and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is available. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your router, and the Tether app with which you can manage your home network no matter where you may find yourself. It contains the following sections: · Register a TP-Link ID · Change Your TP-Link ID Information · Manage the User TP-Link IDs · Manage the Router via the TP-Link Tether App

Chapter 5

TP-Link Cloud Service

5 1 Register a TP-Link ID
If you have skipped the registration during the Quick Setup process, you can:

Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > TP-Link ID or click TP-Link ID on the very top of the page. 3. Click Sign Up and follow the instructions to register a TP-Link ID.

4. After activating your TP-Link ID, come back to the TP-Link ID page to log in. The TP-Link ID used to log in to the router for the first time will be automatically bound as an Admin.
Note: · To learn more about the Admin and User TP-Link ID, refer to Manage the User TP-Link IDs. · Once the router is bound to your TP-Link ID, you need to log in to the router with the TP-Link ID. · Once you have registered a TP-Link ID on the web management page, you can only register another TP-Link ID via the
Tether APP. Please refer to Manage the Router via the TP-Link Tether App to install the app. · If you want to unbind the admin TP-Link ID from your router, please go to Advanced > TP-Link ID, an click Unbind in the
Device Information section.
5 2 Change Your TP-Link ID Information
Follow the steps below to change your email address and password of your TP- Link ID as needed. 1. Visit http://tplinkwifi.net, and log in with your TP- Link ID. 2. Go to Advanced > TP-Link ID, and focus on the Account Information section.
· To change your email address: 1. Click behind the Email. 2. Enter the password of your TP-Link ID, then a new email address. And click Save.
23

Chapter 5

TP-Link Cloud Service

· To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save.

5 3 Manage the User TP-Link IDs
The TP-Link ID used to log in to the router for the first time will be automatically bound as the Admin account. An admin account can add or remove other TP-Link IDs to or
24

Chapter 5

TP-Link Cloud Service

from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot: · Reset the router to its factory default settings either on the web management page
or in the Tether app. · Add/remove other TP-Link IDs to/from the router.

5 3 1 Add TP-Link ID to Manage the Router

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID.

2. Go to Advanced > TP-Link ID, and focus on the Bound Accounts section.

3. Click

, enter another TP-Link ID as needed and click Save.

Note: If you need another TP-Link ID, please register a new one via the Tether app. Refer to Manage the Router via the TP-Link Tether App to install the app and register a new TP-Link ID.

4. The new TP-Link ID will be displayed in the Bound Accounts table as a User.

5 3 2 Remove TP-Link ID(s) from Managing the Router
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Advanced > TP-Link ID, and focus on the Bound Accounts section. 3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click Unbind.
25

Chapter 5

TP-Link Cloud Service

5 4 Manage the Router via the TP-Link Tether App
The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search “TP- Link Tether” or
simply scan the QR code to download and install the app.
OR
2. Launch the Tether app and log in with your TP-Link ID.
Note: If you don’t have a TP-Link ID, create one first.
3. Connect your device to the router’s wireless network. 4. Go back to the Tether app, select the model of your router and log in with the password
you set for the router. 5. Manage your router as needed.
Note: If you need to remotely access your router from your smart devices, you need to: · Log in with your TP-Link ID. If you don’t have one, refer to Register a TP-Link ID. · Make sure your smartphone or tablet can access the internet with cellular data or a Wi-Fi network.

26

Chapter 6
Wireless Settings
This chapter guides you on how to configure the wireless settings. It contains the following sections: · Specify Wireless Settings · Schedule Your Wireless Function · Use WPS for Wireless Connection · Advanced Wireless Settings

Chapter 6

Wireless Settings

6 1 Specify Wireless Settings
The router’s wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the label of the router. You can customize the wireless settings according to your needs. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Wireless or Advanced > Wireless > Wireless Settings.

¾ To enable or disable OFDMA: OFDMA enables multiple users to transmit data simultaneously, and thus greatly improves speed and efficiency. Noted that only when your clients also support OFDMA, can you fully enjoy the benefits. It is disabled by default. 1. Go to Advanced > Wireless > Wireless Settings. 2. Enable OFDMA.
¾ To enable or disable TWT: TWT (Target Wake Time) allows 802.11ax routers and clients to negotiate their periods to transmit and receive data packets. Clients only wake up at TWT sessions and remain in sleep mode for the rest of the time, which significantly extend their battery life. It is disabled by default. 1. Go to Advanced > Wireless > Wireless Settings. 2. Enable TWT.
¾ To use the Smart Connect function: The Smart Connect function lets you enjoy a more high-speed network by assigning your devices to best wireless bands based on actual conditions to balance network demands.
28

Chapter 6
1. Go to Advanced > Wireless > Wireless Settings. 2. Enable Smart Connect.

Wireless Settings

3. Keep the default values or set a new SSID and password, and click SAVE. This SSID and password will be applied for the 2.4GHz and 5GHz wireless networks. If you want to configure the wireless settings separately for each band, untick the checkbox to disable this feature.
¾ To enable or disable the wireless function: 1. Go to Wireless or Advanced > Wireless > Wireless Settings. 2. The wireless function is enabled by default. If you want to disable the wireless function
of the router, just untick the Enable checkbox of each wireless network. In this case, all the wireless settings will be invalid.
¾ To change the wireless network name (SSID) and wireless password: 1. Go to Wireless or Advanced > Wireless > Wireless Settings. 2. Create a new SSID in Network Name (SSID) and customize the password for the
network in Password. The value is case-sensitive.
Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective. Please write down the new SSID and password for future use.
¾ To hide SSID: 1. Go to Wireless or Advanced > Wireless > Wireless Settings. 2. Select Hide SSID, and your SSID won’t display when you scan for local wireless
networks on your wireless device and you need to manually join the network.
¾ To change the security option: 1. Go to Advanced > Wireless > Wireless Settings. 2. Select an option from the Security drop-down list: None, WPA/WPA2-Personal,
WPA2/WPA3-Personal, WPA/WPA2-Enterprise. We recommend you don’t change the default settings unless necessary. In addition · Transmit Power – Select either High, Middle or Low to specify the data transmit power. The default and recommended setting is High. · Channel Width – Select a channel width (bandwidth) for the wireless network. · Channel – Select an operating channel for the wireless network. It is recommended to leave the channel to Auto, if you are not experiencing the intermittent wireless connection issue.
29

Chapter 6

Wireless Settings

· Mode – Select a transmission mode according to your wireless client devices. It is recommended to just leave it as default.
6 2 Schedule Your Wireless Function
The wireless network can be automatically off at a specific time when you do not need the wireless connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > Wireless > Wireless Schedule. 3. Enable the Wireless Schedule feature.

4. Click Add to specify a wireless off period during which you need the wireless off automatically, and click SAVE.

Note: · The Effective Time Schedule is based on the time of the router. You can go to Advanced > System > Time & Language
to modify the time. · The wireless network will be automatically turned on after the time period you set.
6 3 Use WPS for Wireless Connection
Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security- protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Make sure the Wi-Fi of your router is on and go to Advanced > Wireless > WPS.
30

Chapter 6

Wireless Settings

6 3 1 Connect via the Client’s PIN
Enter the PIN of your device and click Connect. Then your device will get connected to the router.

6 3 2 Connect via the Router’s PIN
Select Router’s PIN in Method 1 to enable Router’s PIN. You can use the default PIN or generate a new one.
Note: PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router.
6 3 3 Push the WPS Button
Click Start on the screen or directly press the router’s WPS button. Within two minutes, enable WPS on your personal device. Success will appear on the screen and the WPS LED of the router should change from flashing to solid on, indicating successful WPS connection.
31

Chapter 6

Wireless Settings

6 4 Advanced Wireless Settings
Check advanced wireless settings for your device. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > Wireless > Additional Settings. 3. Configure advanced wireless settings.
· WMM – WMM function can guarantee the packets with high-priority messages being transmitted preferentially. 32

Chapter 6

Wireless Settings

· AP Isolation – This function isolates all connected wireless stations so that wireless stations cannot access each other through WLAN.
· Airtime Fairness – This function can improve the overall network performance by sacrificing a little bit of network time on your slow devices.
· Zero Wait DFS – Zero Wait DFS (Dynamic Frequency Selection) allows the router to immediately reselect a new channel once the radar signal is detected on a channel allocated to radar devices to ensure lag-free network experience.
· Beacon Interval – Enter a value between 40 and 1000 in milliseconds to determine the duration between beacon packets that are broadcasted by the router to synchronize the wireless network. The default value is 100 milliseconds.
· RTS Threshold- Enter a value between 1 and 2346 to determine the packet size of data transmission through the router. By default, the RTS (Request to Send) Threshold size is 2346. If the packet size is greater than the preset threshold, the router will send RTS frames to a particular receiving station and negotiate the sending of a data frame.
· DTIM Interval – The value determines the interval of DTIM (Delivery Traffic Indication Message). Enter a value between 1 and 15 intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval.
· Group Key Update Period – Enter a number of seconds (minimum 30) to control the time interval for the encryption key automatic renewal. The default value is 0, meaning no key renewal.

33

Chapter 7
Guest Network
This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network security and privacy. It contains the following sections: · Create a Network for Guests · Customize Guest Network Options

Chapter 7

Guest Network

7 1 Create a Network for Guests
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2. Go to Advanced > Wireless > Guest Network or click Wireless on the top page. Locate the Guest Network section.
3. Create a guest network as needed. 1 ) Tick the Enable checkbox for the 2.4GHz, 5GHz-1, or 5GHz-2 wireless network. 2 ) Customize the SSID. Don`t select Hide SSID unless you want your guests to manually input the SSID for guest network access. 3 ) Select the Security type and customize your own password. If No security is selected, no password is needed to access your guest network.

4. Click Save. Now your guests can access your guest network using the SSID and password you set!
5. You can also click Sharing Network to share the SSID and password to your guests.
Tips: To view guest network information, go to Network Map and locate the Guest Network section. You can turn on or off the guest network function conveniently.
35

Chapter 7

Guest Network

7 2 Customize Guest Network Options
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2. Go to Advanced > Wireless >Guest Network. Locate the Guest Permissions section. 3. Customize guest network options according to your needs.

· Allow guests to see each other Tick this checkbox if you want to allow the wireless clients on your guest network to communicate with each other via methods such as network neighbors and Ping.
· Allow guests to access your local network Tick this checkbox if you want to allow the wireless clients on your guest network to communicate with the devices connected to your router’s LAN ports or main network via methods such as network neighbors and Ping.
4. Click Save. Now you can ensure network security and privacy!

36

Chapter 8
USB Settings
This chapter describes how to use the USB ports to share files and media from the USB storage devices over your home network locally, or remotely through the internet. The router supports USB external flash drives and hard drives. It contains the following sections: · Access the USB Storage Device · Media Sharing · Time Machine

Chapter 8

USB Settings

8 1 Access the USB Storage Device
Insert your USB storage device into the router’s USB port and then access files stored there locally or remotely.
Tips: · If you use USB hubs, make sure no more than 4 devices are connected to the router. · If the USB storage device requires using bundled external power, make sure the external power has been connected. · If you use a USB hard drive, make sure its file system is FAT32, exFat, NTFS or HFS+. · Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced

USB > USB Storage Device and click Remove.
8 1 1 Access the USB Device Locally
Insert your USB storage device into the router’s USB port and then refer to the following table to access files stored on your USB storage device.

· Method 1:
Go to Computer > Network, then click the Network Server Name (TPSHARE by default) in the Computer section.
Note: Operations in different systems are similar. Here we take Windows 7 as an example.

Windows computer

38

Chapter 8

USB Settings

· Method 2:
Open the Windows Explorer (or go to Computer) and type the server address \tplinkwifi.net or ftp://tplinkwifi.net in the address bar, then press Enter. Windows computer

1 ) Select Go > Connect to Server. 2 ) Type the server address smb://tplinkwifi.net. 3 ) Click Connect.
Mac
4 ) When prompted, select the Guest radio box. (If you have set up a username and a password to deny anonymous access to the USB disks, you should select the Registered User radio box. To learn how to set up an account for the access, refer to To Set Up Authentication for Data Security.)
Tablet Use a third-party app for network files management.
Tips: You can also access your USB storage device by using your Network/Media Server Name as the server address. Refer to To Customize the Address of the USB Storage Device to learn more.
8 1 2 Access the USB Device Remotely
You can access your USB disk outside the local area network. For example, you can:
39

Chapter 8

USB Settings

· Share photos and other large files with your friends without logging in to (and paying for) a photo-sharing site or email system.
· Get a safe backup for the materials for a presentation. · Remove the files on your camera’s memory card from time to time during the journey.
Note: If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because private addresses are not routed on the internet.
Follow the steps below to configure remote access settings.
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 Go to Advanced > USB > USB Storage Device. 3 Tick the Internet FTP checkbox, and then click Save.

4 Refer to the following table to access your USB disk remotely. 40

Chapter 8

USB Settings

1 ) Open the Windows Explorer (or go to Computer, only for Windows users) or open a web browser.
2 ) Type the server address in the address bar:
Type in ftp://: (such as ftp://59.40.2.243:21). If you have specified the domain name of the router, you can also type in ftp://: (such as ftp://MyDomainName:21)

Computer

Tablet

3 ) Press Enter on the keyboard. 4 ) Access with the username and password you set in To Set Up
Authentication for Data Security.
Tips: You can also access the USB disk via a third-party app for network files management, which can resume broken file transfers.
Use a third-party app for network files management.

Tips: Click Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you router.

8 1 3 Customize the Access Settings
By default, all the network clients can access all folders on your USB disk. You can customize your sharing settings by setting a sharing account, sharing specific contents and setting a new sharing address on the router’s web management page.
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 Go to Advanced > USB > USB Storage Device.
· To Customize the Address of the USB Storage Device You can customize the server name and use the name to access your USB storage device.
1 In the Access Method session, make sure Samba for Windows is ticked, and enter a Network/Media Server Name as you like, such as MyShare, then click Save.

41

Chapter 8

USB Settings

2 Now you can access the USB storage device by visiting \MyShare (for Windows) or smb://MyShare (for Mac).
· To Only Share Specific Content Focus on the File Sharing section. Specify sharing folders that you want to share and click Save.
· To Set Up Authentication for Data Security You can set up authentication for your USB storage device so that network clients will be required to enter username and password when accessing the USB storage device. 1 In the File Sharing section, enable Secure Sharing.
42

Chapter 8

USB Settings

2 Click to modify the access account. The username and password are both admin for default administrator account, and both visit for default visitor account. Accessing as an administrator can read and modify the shared folders while visitors can only read the shared folders.
Note: 1. For Windows users, do not set the sharing username the same as the Windows username. Otherwise, Windows
credential mechanism may cause the following problems: · If the sharing password is also the same as the Windows password, authentication will not work since the Windows
will automatically use its account information for USB access. · If the sharing password is different from the Windows password, the Windows will be unable to remember your
credentials and you will always be required to enter the sharing password for USB access. 2. Due to Windows credential mechanism, you might be unable to access the USB disk after changing Authentication
settings. Please log out from the Windows and try to access again. Or you can change the address of the USB disk by referring to To Customize the Address of the USB Storage Device.
8 2 Media Sharing
The feature of Media Sharing allows you to view photos, play music and watch movies stored on the USB storage device directly from DLNA-supported devices, such as your computer, tablet and PS2/3/4. 1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2 Go to Advanced > USB > USB Storage Device. 3 Enable Media Sharing.
4 When your USB storage device is inserted into the router, your DLNA- supported devices (such as your computer and pad) connected to the router can detect and play the media files on the USB storage devices.
5 Refer to the following table for detailed instructions. 43

Chapter 8

USB Settings

· Go to Computer > Network, then click the Media Server Name (Model number- share by default) in the Media Devices section.
Note: Here we take Windows 7 as an example.

Windows Computer

Tablet · Use a third-party DLNA-supported player.
8 3 Time Machine
Time Machine backs up all files on your Mac computer to a USB storage device connected to your router. 1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2 Go to Advanced > USB > Time Machine.

44

Chapter 8
3 Tick the checkbox to enable Time Machine. 4 Click Select to select a location for Time Machine backups. 5 Set the Size Limit for Backups.
Note: 0 means no limit for the space.
6 Click Save.

USB Settings

45

Chapter 9
HomeShield
Customize your home network with enhanced security using a kit of features built in TP-Link HomeShield. Whether protecting your sensitive data or limiting the access of kids and guests, TP-Link HomeShield provides you the tools you need to fully manage your network. It contains the following sections: · Network Security · Parental Controls · Network Analysis & Optimization

Chapter 9

HomeShield

9 1 Network Security
TP-Link HomeShield provides many tools to protect your network from malicious attacks.
Network Analysis
Analyze and optimize your network
IoT Protection
Get real-time security for your Internet of Things
Intrusion Prevention System
Identifies and block network intruders
Malicious Content Filter
Block malicious content
DDoS Protection
Protects your home network from DDoS attacks
¾ To use this feature, download Tether to enjoy the HomeShield service 1. Scan the QR code or get the Tether app from the Apple App Store or Google Play.
OR

2. Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
3. Log in to your router and tap the HomeShield tab to use this feature.
9 2 Parental Controls
Parental Controls allows you to set up unique restrictions on internet access for each member of your family. You can block inappropriate content, set daily limits for the total time spent online and restrict internet access to certain times of the day.

47

Chapter 9

HomeShield

Child Protection
Keep your child away from inappropriate content
Family Incentive Program
Manage screen time and create rewards
Family Time
Pause the internet to enjoy family time ¾ To use this feature, download Tether to enjoy the HomeShield service 1. Scan the QR code or get the Tether app from the Apple App Store or Google Play.
OR
2. Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
3. Log in to your router and tap the HomeShield tab to use this feature.
9 3 Network Analysis & Optimization
TP-Link HomeShield provides many tools for you to analyze and optimize your network.
Weekly and Monthly Reports
Get weekly and monthly reports of your network usage
Quality of Service (QoS)
Prioritizes devices to give faster performance
Scan
Run a scan for a better network performance and security anytime ¾ To use this feature, download Tether to enjoy the HomeShield service 1. Scan the QR code or get the Tether app from the Apple App Store or Google Play.
OR

48

Chapter 9

HomeShield

2. Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
3. Log in to your router and tap the HomeShield tab to use this feature.

49

Chapter 10
Network Security
This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your home network from cyber attacks, block or allow specific client devices to access your network using Access Control, or you can prevent ARP spoofing and ARP attacks using IP & MAC Binding. It contains the following sections: · Protect the Network from Cyber Attacks · Access Control · IP & MAC Binding
Tips: You can go to HomeShield to get a more comprehensive network protection system for your home network

Chapter 10

Network Security

10 1 Protect the Network from Cyber Attacks
The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default.
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 Go to Advanced > Security > Firewall. It’s recommended to keep the default settings.

10 2 Access Control
Access Control is used to block or allow specific client devices to access your network (via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 Go to Advanced > Security > Access Control. 3 Toggle on to enable Access Control. 4 Select the access mode to either block (recommended) or allow the device(s) in the
list. To block specific device(s): 1 ) Select Blacklist.
51

Chapter 10

Network Security

2 ) Click

and select devices you want to be blocked and Click ADD.

3 ) The Operation Succeeded message will appear on the screen, which means the selected devices have been successfully added to the blacklist.

To allow specific device(s): 1 ) Select Whitelist and click SAVE.

2 ) Your own device is in the whitelist by default and cannot be deleted. Click to add other devices to the whitelist.
· Add connected devices 1 ) Click Select From Device List. 2 ) Select the devices you want to be allowed and click ADD.
52

Chapter 10

Network Security

3 ) The Operation Succeeded message will appear on the screen, which means the selected devices have been successfully added to the whitelist.
· Add unconnected devices 1 ) Click Add Manually. 2 ) Enter the Device Name and MAC Address of the device you want to be allowed
and click ADD.

3 ) The Operation Succeeded message will appear on the screen, which means the device has been successfully added to the whitelist.
Done!
Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist.
10 3 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network device’s IP address to its MAC address. This will prevent ARP Spoofing and other ARP attacks by denying network access to an device with matching IP address in the Binding list, but unrecognized MAC address.
53

Chapter 10

Network Security

I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 Go to Advanced > Security > IP & MAC Binding. 3 Enable IP & MAC Binding.

4 Bind your device(s) according to your need.

To bind the connected device(s):

1 ) Click

in the Binding List section.

2 ) Click VIEW CONNECTED DEVICES and select the device you want to bind. The MAC Address and IP Address fields will be automatically filled in.

3 ) Click SAVE. 54

Chapter 10

To bind the unconnected device:

1 ) Click

in the Binding List section.

Network Security

2 ) Enter the MAC Address and IP Address that you want to bind. 3 ) Click SAVE.
Done!
Now you don’t need to worry about ARP spoofing and ARP attacks!

55

Chapter 11
NAT Forwarding
The router’s NAT (Network Address Translation) feature makes devices on the LAN use the same public IP address to communicate with devices on the internet, which protects the local network by hiding IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on the local network. With the forwarding feature the router can penetrate the isolation of NAT and allows devices on the internet to initiatively communicate with devices on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Port Forwarding, Port Triggering, UPNP and DMZ. It contains the following sections: · Share Local Resources on the Internet by Port Forwarding · Open Ports Dynamically by Port Triggering · Make Applications Free from Port Restriction by DMZ · Make Xbox Online Games Run Smoothly by UPnP

Chapter 11

NAT Forwarding

11 1 Share Local Resources on the Internet by Port Forwarding

When you build up a server on the local network and want to share it on the internet, Port Forwarding can realize the service and provide it to internet users. At the same time Port Forwarding can keep the local network safe as other services are still invisible from the internet.
Port Forwarding can be used for setting up public services on your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration.
I want to:

Share my personal website I’ve built in local network with my friends through the internet.
For example, the personal website has been built on my home PC (192.168.0.100). I hope that my friends on the internet can visit my website in some way. The PC is connected to the router with the WAN IP address 218.18.232.154.

Personal Website

Router

Home

INTERNET LAN WAN: 218.18.232.154

How can I do that?

1 Assign a static IP address to your PC, for example 192.168.0.100.

2 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.

3 Go to Advanced > NAT Forwarding > Port Forwarding.

4 Click

.

57

Chapter 11

NAT Forwarding

5 Click VIEW COMMON SERVICES and select HTTP. The External Port, Internal Port and Protocol will be automatically filled in.
6 Click VIEW CONNECTED DEVICES and select your home PC. The Device IP Address will be automatically filled in. Or enter the PC’s IP address 192.168.0.100 manually in the Device IP Address field.
7 Click SAVE.

Tips: · It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and
protocol to use. · If the service you want to use is not in the common services list, you can enter the corresponding parameters
manually. You should verify the port number that the service needs. · You can add multiple port forwarding rules if you want to provide several services in a router. Please note that the
External Port should not be overlapped.
Done!
Users on the internet can enter http:// WAN IP (in this example: http:// 218.18.232.154) to visit your personal website.
58

Chapter 11

NAT Forwarding

Tips: · The WAN IP should be a public IP address. For the WAN IP is assigned dynamically by the ISP, it is recommended
to apply and register a domain name for the WAN referring to Set Up a Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit the website. · If you have changed the default External Port, you should use http:// WAN IP: External Port or http:// domain name: External Port to visit the website.

11 2 Open Ports Dynamically by Port Triggering

Port Triggering can specify a triggering port and its corresponding external ports. When a host on the local network initiates a connection to the triggering port, all the external ports will be opened for subsequent connections. The router can record the IP address of the host. When the data from the internet return to the external ports, the router can forward them to the corresponding host. Port Triggering is mainly applied to online games, VoIPs, video players and common applications including MSN Gaming Zone, Dialpad and Quick Time 4 players, etc.

Follow the steps below to configure the Port Triggering rules:

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.

2. Go to Advanced > NAT Forwarding > Port Triggering and click

.

3. Click VIEW COMMON SERVICES, and select the desired application. The Triggering Port, Triggering Protocol and External Port will be automatically filled in. The following picture takes application MSN Gaming Zone as an example.
59

Chapter 11

NAT Forwarding

4. Click SAVE.
Tips: · You can add multiple port triggering rules according to your network need. · The triggering ports can not be overlapped. · If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You
should verify the external ports the application uses first and enter them into External Port field according to the format the page displays.
11 3 Make Applications Free from Port Restriction by DMZ
When a PC is set to be a DMZ (Demilitarized Zone) host on the local network, it is totally exposed to the internet, which can realize the unlimited bidirectional communication between internal hosts and external hosts. The DMZ host becomes a virtual server with all ports opened. When you are not clear about which ports to open in some special applications, such as IP camera and database software, you can set the PC to be a DMZ host.
Note: When DMZ is enabled, the DMZ host is totally exposed to the internet, which may bring some potential safety hazards. If DMZ is not in use, please disable it in time.
I want to:
Make the home PC join the internet online game without port restriction. For example, due to some port restriction, when playing the online games, you can log in normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ host with all ports open.
60

Chapter 11

NAT Forwarding

How can I do that?
1 Assign a static IP address to your PC, for example 192.168.0.100. 2 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 3 Go to Advanced > NAT Forwarding > DMZ and tick to enable DMZ. 4 Click VIEW CONNECTED DEVICES and select your PC. The Device IP
Address will be automatically filled in. Or enter the PC’s IP address 192.168.0.100 manually in the DMZ Host IP Address field.

5 Click SAVE.
Done!
The configuration is completed. You’ve set your PC to a DMZ host and now you can make a team to game with other players.
11 4 Make Xbox Online Games Run Smoothly by UPnP
The UPnP (Universal Plug and Play) protocol allows applications or host devices to automatically find the front-end NAT device and send request to it to open the corresponding ports. With UPnP enabled, the applications or host devices on the local network and the internet can freely communicate with each other thus realizing the seamless connection of the network. You may need to enable the UPnP if you want to use applications for multiplayer gaming, peer- to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc.
Tips: · UPnP is enabled by default in this router. · Only the application supporting UPnP protocol can use this feature. · UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of
operating system need to install the UPnP components).
For example, when you connect your Xbox to the router which has connected to the internet to play online games, UPnP will send request to the router to open the
61

Chapter 11

NAT Forwarding

corresponding ports allowing the following data penetrating the NAT to transmit. Therefore, you can play Xbox online games without a hitch.

INTERNET
If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your
needs.

62

Chapter 12
VPN Server
The VPN (Virtual Private Networking) Server allows you to access your home network in a secured way through internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to Point Tunneling Protocol) VPN. OpenVPN is somewhat complex but with greater security and more stable. It is suitable for restricted environment, such as campus network and company intranet. PPTP VPN is more easily used and its speed is faster, it’s compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked easily, and PPTP VPN connection may be prevented by some ISP. It contains the following sections, please choose the appropriate VPN server connection type as needed. · Use OpenVPN to Access Your Home Network · Use PPTP VPN to Access Your Home Network

Chapter 12

VPN Server

12 1 Use OpenVPN to Access Your Home Network
In the OpenVPN connection, the home network can act as a server, and the remote device can access the server through the router which acts as an OpenVPN Server gateway. To use the VPN feature, you should enable OpenVPN Server on your router, and install and run VPN client software on the remote device. Please follow the steps below to set up an OpenVPN connection.

INTERNET

Home Network

Router

Remote Devices

Step1 Set up OpenVPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > VPN Server > OpenVPN, and tick the Enable box of OpenVPN.

Note: · Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router’s WAN port and synchronize your System Time with internet. · The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the VPN
Server.
3. Select the Service Type (communication protocol) for OpenVPN Server: UDP, TCP. 4. Enter a VPN Service Port to which a VPN device connects, and the port number
should be between 1024 and 65535. 5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased
to the device by the OpenVPN server.
64

Chapter 12

VPN Server

6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote device to access internet through the VPN Server.
7. Click SAVE.
8. Click GENERATE to get a new certificate.

Note: If you have already generated one, please skip this step, or click GENERATE to update the certificate.
9. Click EXPORT to save the OpenVPN configuration file which will be used by the remote device to access your router.

Step 2 Configure OpenVPN Connection on Your Remote Device 1. Visit http://openvpn.net/index.php/download/community-downloads.html to
download the OpenVPN software, and install it on your device where you want to run the OpenVPN client utility.
Note: You need to install the OpenVPN client utility on each device that you plan to apply the VPN function to access your router. Mobile devices should download a third-party app from Google Play or Apple App Store.
2. After the installation, copy the file exported from your router to the OpenVPN client utility’s “config” folder (for example, C:Program FilesOpenVPNconfig on Windows). The path depends on where the OpenVPN client utility is installed.
3. Run the OpenVPN client utility and connect it to OpenVPN Server.
12 2 Use PPTP VPN to Access Your Home Network
PPTP VPN Server is used to create a VPN connection for remote device. To use the VPN feature, you should enable PPTP VPN Server on your router, and configure the PPTP connection on the remote device. Please follow the steps below to set up a PPTP VPN connection. Step 1 Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
65

Chapter 12

VPN Server

2. Go to Advanced > VPN Server > PPTP, and tick the Enable box of PPTP.

Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router’s WAN port and synchronize your System Time with internet.
3. In the Client IP Address field, enter the range of IP addresses (up to 10) that can be leased to the devices by the PPTP VPN server.
4. Set the PPTP connection permission according to your needs. · Select Allow Samba (Network Place) access to allow your VPN device to access your local Samba server. · Select Allow NetBIOS passthrough to allow your VPN device to access your Samba server using NetBIOS name. · Select Allow Unencrypted connections to allow unencrypted connections to your VPN server.
5. Click SAVE.
6. Configure the PPTP VPN connection account for the remote device. You can create up to 16 accounts.

1 ) Click

.

2 ) Enter the Username and Password to authenticate devices to the PPTP VPN Server.

66

Chapter 12

VPN Server

3 ) Click ADD. Step 2 Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example. 1. Go to Start > Control Panel > Network and Internet

Network and Sharing Center. 2. Select Set up a new connection or network.

3. Select Connect to a workplace and click Next. 67

Chapter 12

VPN Server

4. Select Use my Internet connection (VPN).
5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 68

Chapter 12

VPN Server

6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect.
7. The PPTP VPN connection is created and ready to use. 69

Chapter 12

VPN Server

70

Chapter 13
Customize Your Network Settings
This chapter guides you on how to configure advanced network features. It contains the following sections: · Change the LAN Settings · Configure to Support IPTV Service · Specify DHCP Server Settings · Set Up a Dynamic DNS Service Account · Create Static Routes

Chapter 13

Customize Your Network Settings

13 1 Change the LAN Settings
The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2. Go to Advanced > Network > LAN.
3. Type in a new IP Address appropriate to your needs. And leave the Subnet Mask as the default settings.

4. Click SAVE.
Note: If you have set the Port Forwarding, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure these features.
13 2 Configure to Support IPTV Service
I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 Go to Advanced > Network > IPTV/VLAN. 3 If your ISP provides the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK: 1 ) Tick the IGMP Proxy and IGMP Snooping checkbox, then select the IGMP Version,
either V2 or V3, as required by your ISP.
72

Chapter 13

Customize Your Network Settings

2 ) Click SAVE. 3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can
connect your set-top box to any of the router’s Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service: 1 ) Tick Enable IPTV/VLAN. 2 ) Select the appropriate Mode according to your ISP.
· Select Bridge if your ISP is not listed and no other parameters are required. · Select Custom if your ISP is not listed but provides necessary parameters.

3 ) After you have selected a mode, the necessary parameters, including the LAN port for IPTV connection, are predetermined. If not, select the LAN type to determine which port is used to support IPTV service.
4 ) Click SAVE. 5 ) Connect the set-top box to the corresponding LAN port which is predetermined
or you have specified in Step 3.
Done!
Your IPTV setup is done now! You may need to configure your set-top box before enjoying your TV.
73

Chapter 13

Customize Your Network Settings

13 3 Specify DHCP Server Settings
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > Network > DHCP Server.
· To specify the IP address that the router assigns:

1. Tick the Enable checkbox. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in
and is the same as the LAN IP address of the router. 4. Click SAVE. · To reserve an IP address for a specified client device: 1. Click Add in the Address Reservation section.
74

Chapter 13

Customize Your Network Settings

2. Click VIEW CONNECTED DEVICES and select the you device you want to reserve an IP for. Then the MAC Address will be automatically filled in. Or enter the MAC address of the client device manually.
3. Enter the IP address to reserve for the client device. 4. Click SAVE.
13 4 Set Up a Dynamic DNS Service Account
Most ISPs assign a dynamic IP address to the router and you can use this IP address to access your router remotely. However, the IP address can change from time to time and you don’t know when it changes. In this case, you might apply the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using a domain name without checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider: TP-Link, NO-IP or DynDNS. It is recommended
to select TP-Link so that you can enjoy TP-Link’s superior DDNS service. Otherwise, please select NO-IP or DynDNS. If you don’t have a DDNS account, you have to register first by clicking Register Now.

Note: To enjoy TP-Link’s DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click log in.
4. Click Register in the Domain Name List if you have selected TP-Link, and enter the Domain Name as needed.

75

Chapter 13

Customize Your Network Settings

If you have selected NO-IP or DynDNS, enter the username, password and domain name of your account.
5. Click LOGIN AND SAVE.
Tips: If you want to use a new DDNS account, please click Logout first, and then log in with a new account.
13 5 Create Static Routes
Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually- configured routing information guides the router in forwarding data packets to the specific destination.
76

Chapter 13

Customize Your Network Settings

I want to:
Visit multiple networks and servers at the same time.
For example, in a small office, my PC can surf the internet through Router A, but I also want to visit my company’s network. Now I have a switch and Router B. I connect the devices as shown in the following figure so that the physical connection between my PC and my company’s server is established. To surf the internet and visit my company’s network at the same time, I need to configure the static routing.

Router A

Router B

Company’s server

LAN: 192.168.0.1

Switch

WAN: 172.30.30.100

LAN: 192.168.0.2

172.30.30.1

PC
192.168.0.100
How can I do that?
1 Change the routers’ LAN IP addresses to two different IP addresses on the same subnet. Disable Router B’s DHCP function.
2 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A.
3 Go to Advanced > Network > Routing. 4 Click Add and finish the settings according to the following explanations:

77

Chapter 13

Customize Your Network Settings

Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of Router A. In the example, the IP address of the company network is the destination IP address, so here enter 172.30.30.1.
Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination network is a single IP, so here enter 255.255.255.255.
Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the router’s IP which sends out data. In the example, the data packets will be sent to the LAN port of Router B and then to the Server, so the default gateway should be 192.168.0.2.
Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port of Router A, so LAN/ WLAN should be selected.
Description: Enter a description for this static routing entry.
5 Click SAVE.
6 Check the Routing Table below. If you can find the entry you’ve set, the static routing is set successfully.

Done!
Open a web browser on your PC. Enter the company server’s IP address to visit the company network.

78

Chapter 14
Manage the Router
This chapter will show you the configuration for managing and maintaining your router. It contains the following sections: · Upgrade the Firmware · Backup and Restore Configuration Settings · Change the Login Password · Password Recovery · Local Management · Remote Management · System Log · Test the Network Connectivity · Set Up System Time · Set the Router to Reboot Regularly · Control the LED

Chapter 14

Manage the Router

14 1 Upgrade the Firmware
TP-Link aims at providing better network experience for users. We will inform you through the web management page if there’s any update firmware available for your router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free.
Note: · Backup your router configuration before firmware upgrade. · Do NOT turn off the router during the firmware upgrade.
14 1 1 Auto Update
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2. Enable Auto Update.

3. Specify the Update Time and save the settings.
The router will update firmware automatically at the specified time when new version is available.

14 1 2 Online Upgrade

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.

2. When the latest firmware is available for your router, the upgrade icon

will

display in the top-right corner of the page. Click the icon to go to the Firmware

Upgrade page.

Alternatively, you can go to Advanced > System > Firmware Upgrade, and click CHECK FOR UPGRADES to see whether the latest firmware is released.

80

Chapter 14

Manage the Router

3. Focus on the Online Upgrade section, and click UPGRADE if there is new firmware.
4. Wait a few minutes for the upgrade and reboot to complete.
Tips: If there’s a new and important firmware update for your router, you will see the prompt notification on your computer as long as a web browser is opened. Click UPGRADE, and log in to the web management page with the username and password you set for the router. You will see the Firmware Upgrade page.
14 1 3 Local Upgrade
1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 3. Go to Advanced > System > Firmware Upgrade. 4. Focus on the Local Upgrade section. Click BROWSE to locate the downloaded new
firmware file, and click UPGRADE.
81

Chapter 14

Manage the Router

5. Wait a few minutes for the upgrade and reboot to complete.
Note: If you fail to upgrade the firmware for the router, please contact our Technical Support.
14 2 Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can backup the configuration file to your computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if necessary you can erase the current settings and reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System Tools > Backup & Restore.
· To backup configuration settings: Click BACK UP to save a copy of the current settings to your local computer. A `.bin’ file of the current settings will be stored to your computer.

· To restore configuration settings:
1. Click BROWSE to locate the backup configuration file stored on your computer, and click RESTORE.

2. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the router.
· To reset the router except your login password and TP-Link ID: 1. In the Factory Default Restore section, click RESTORE.
82

Chapter 14

Manage the Router

2. Wait a few minutes for the resetting and rebooting.
Note: · During the resetting process, do not turn off the router. · After reset, you can still use the current login password or the TP-Link ID to log in to the web management page.
· To reset the router to factory default settings: 1. Click FACTORY RESTORE to reset the router.
2. Wait a few minutes for the resetting and rebooting.
Note: · During the resetting process, do not turn off or reset the router. · We strongly recommend you backup the current configuration settings before resetting the router.
14 3 Change the Login Password
The account management feature allows you to change your login password of the web management page.
Note: If you are using a TP-Link ID to log in to the web management page, the account management feature will be disabled. To manage the TP-Link ID, go to Advanced > TP-Link ID.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System > Administration and focus on the Change Password
section.

3. Enter the old password, then a new password twice (both case-sensitive). Click SAVE. 83

Chapter 14

Manage the Router

4. Use the new password for future logins.
14 4 Password Recovery
This feature allows you to recover the login password you set for you router in case you forget it.
Note: If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature will be disabled. To manage the TP-Link ID, go to Advanced > TP-Link ID.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System > Administration and focus on the Password Recovery
section. 3. Tick the Enable box of Password Recovery. 4. Specify a mailbox (From) for sending the recovery letter and enter its SMTP Server
address. Specify a mailbox (To) for receiving the recovery letter. If the mailbox (From) to send the recovery letter requires encryption, Tick the Enable box of Authentication and enter its username and password.
Tips: · SMTP server is available for users in most webmail systems. For example, the SMTP server address of Gmail
is smtp.gmail.com. · Generally, Authentication should be enabled if the login of the mailbox requires username and password.

5. Click SAVE. To recover the login password, please visit http://tplinkwifi.net, click Forgot Password? on the login page and follow the instructions to set a new password.
84

Chapter 14

Manage the Router

14 5 Local Management
This feature allows you to limit the number of client devices on your LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System > Administration and complete the settings In Local
Management section as needed.
· Access the router via HTTPS and HTTP: Tick the Enable box of Local Management via HTTPS to access the router via HTTPS and HTTP, or keep it disabled to access the router only via HTTP.

· Allow all LAN connected devices to manage the router: Select All Devices for Local Managers.

· Allow specific devices to manage the router: 1. Select All Devices for Local Managers and click SAVE.

85

Chapter 14

Manage the Router

2. Click Add Device.
3. Click VIEW CONNECTED DEVICES and select the device to manage the router from the Connected Devices list, or enter the MAC address of the device manually.
4. Specify a Description for this entry. 5. Click SAVE.
14 6 Remote Management
This feature allows you to control remote devices’ authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System > Administration and complete the settings in Remote
Management section as needed. · Forbid all devices to manage the router remotely: Do not tick the Enable checkbox of Remote Management.
86

Chapter 14

Manage the Router

· Allow all devices to manage the router remotely:

1. Tick the Enable checkbox of Remote Management. 2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value
between 1024 and 65535. 3. Select All Devices for Remote Managers. 4. Click SAVE. Devices on the internet can log in to http://Router’s WAN IP address:port number (such as http://113.116.60.229:1024) to manage the router.
Tips: · You can find the WAN IP address of the router on Network Map > Internet. · The router’s WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log
in to the router through a domain name.
· Allow a specific device to manage the router remotely:
87

Chapter 14

Manage the Router

1. Tick the Enable checkbox of Remote Management. 2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value
between 1024 and 65535. 3. Select Specified Device for Remote Managers. 4. In the Only this IP Address field, enter the IP address of the remote device to manage
the router. 5. Click SAVE. Devices using this WAN IP can manage the router by logging in to http://Router’s WAN IP:port number (such as http://113.116.60.229:1024).
Tips: The router’s WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name.
14 7 System Log
When the router does not work normally, you can save the system log and send it to the technical support for troubleshooting. · To save the system log locally: 1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router. 2. Go to Advanced > System > System Log. 3. Choose the type and level of the system logs as needed.
88

Chapter 14

Manage the Router

4. In the Save Log section, click SAVE TO LOCAL to save the system logs to a local disk.
· To send the system log to a mailbox at a fixed time: For example, I want to check my router’s working status at a fixed time every day, however, it’s too troublesome to log in to the web management page every time I want to go checking. It would be great if the system logs could be sent to my mailbox at 8 a.m. every day. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System Tools > System Log. 3. In the Save Log section, click MAIL LOG. 4. Enter the information required:
89

Chapter 14

Manage the Router

1 ) Email From: Enter the email address used for sending the system log. 2 ) Select Require Password.
Tips: Generally, Require Password should be selected if the login of the mailbox requires username and password.
3 ) Username: Enter the email address used for sending the system log. 4 ) Email Password: Enter the password to login the sender’s email address. 5 ) SMTP Server: Enter the SMTP server address.
Tips: SMTP server is available for users in most webmail systems. For example, the SMTP server address of Hotmail is smtp-mail.outlook.com.
6 ) Email To: Enter the recipient’s email address, which can be the same as or different from the sender’s email address.
7 ) Select Mail Log Automatically.
Tips: The router will send the system log to the designated email address if this option is enabled.
8 ) Frequency: This determines how often the recipient will receive the system log . 5. Click SAVE.
14 8 Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other network devices.
90

Chapter 14

Manage the Router

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2. Go to Advanced > System > Diagnostics.

3. Enter the information: 1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity; · Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time. · Traceroute is used to display the route (path) your router has passed to reach the tested host, and measure transit delays of packets across an Internet Protocol network. 2 ) Enter the IP Address or Domain Name of the tested host. 3 ) Modify the Ping Count number and the Ping Packet Size. It’s recommended to keep the default value. 4 ) If you have chosen Traceroute, you can modify the Traceroute Max TTL. It’s recommended to keep the default value.
4. Click START to begin the diagnostics. The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Ping.
91

Chapter 14

Manage the Router

The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Traceroute.

14 9 Set Up System Time
System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls. You can choose the way to obtain the system time as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System > Time & Language.
· To get time from the internet: 1. Enable 24-Hour Time if you want the time to display in a 24-hour way. 2. In the Set Time field, select Get from Internet.

3. Select your local Time Zone from the drop-down list. 4. In the NTP Server I field, enter the IP address or domain name of your desired NTP
Server.
92

Chapter 14

Manage the Router

5. (Optional) In the NTP Server II field, enter the IP address or domain name of the second NTP Server.
6. Click SAVE.
· To get time from your computer: 1. In the Set Time field, select Get from Managing Device.

2. The time of your computer will then be displayed and click SAVE. · To manually set the date and time: 1. In the Set Time field, select Manually.

2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click SAVE. · To set up Daylight Saving Time: 1. Tick the Enable box of Daylight Saving Time.
93

Chapter 14

Manage the Router

2. Select the correct Start date and time when daylight saving time starts at your local time zone.
3. Select the correct End date and time when daylight saving time ends at your local time zone.
4. Click SAVE.
14 10 Set the Router to Reboot Regularly
The Scheduled Reboot feature cleans the cache to enhance the running performance of the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System > Reboot. 3. Tick the Enable box of Reboot Schedule.
4. Specify the Reboot Time when the router reboots and Repeat to decide how often it reboots.
5. Click SAVE. 94

Chapter 14

Manage the Router

14 11 Control the LED
The LED of the router indicates its activities and status. You can enable the Night Mode feature to specify a time period during which the LED is off. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System > LED Control. 3. Enable Night Mode. 4. Specify the LED off time, and the LED will be off during this period every day. 5. Click SAVE.

95

FAQ
Q1 What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has been altered: 1. Connect your computer to the router using an Ethernet cable. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. 3. Go to Wireless to retrieve or reset your wireless password.
Q2 What should I do if I forget my web management password?
· If you are using a TP-Link ID to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it.
· Alternatively, press and hold the Reset button of the router until the LED blinks to restore factory default settings, and then visit http://tplinkwifi.net to create a new login password.
Note: · Please refer to Password Recovery to learn how to configure Password Recovery. · You’ll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q3 What should I do if I can’t log in to the router’s web management page?
This can happen for a variety of reasons. Please try the methods below to log in again. · Make sure your computer is connected to the router correctly and the corresponding
LED indicator(s) light up. · Make sure the IP address of your computer is configured as Obtain an IP address
automatically and Obtain DNS server address automatically. · Make sure http://tplinkwifi.net or http://192.168.0.1 is correctly entered. · Check your computer’s settings:
1 ) Go to Start > Control Panel > Network and Internet, and click View network status and tasks.
2 ) Click Internet Options on the bottom left. 3 ) Click Connections and select Never dial a connection.
96

4 ) Click LAN settings and deselect the following three options and click OK.
5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 97

· Use another web browser or computer to log in again. · Reset the router to factory default settings and try again. If login still fails, please
contact the technical support.
Note: You’ll need to reconfigure the router to surf the internet once the router is reset.
Q4 What should I do if I can’t access the internet even though the configuration is finished?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 Go to Advanced> Network > Status to check internet status: If IP Address is a valid one, please try the methods below and try again: · Your computer might not recognize any DNS server addresses. Please manually
configure the DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 as Primary DNS, click SAVE.
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
98

· Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access.
· Reset the router to factory default settings and reconfigure the router. · Upgrade the firmware of the router. · Check the TCP/IP settings on the particular device if all other devices can get internet
from the router. As the picture below shows, if the IP Address is 0 0 0 0, please try the methods below and try again:
· Make sure the physical connection between the router and the modem is proper. · Clone the MAC address of your computer.
99

1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 ) Go to Internet or Advanced > Network > Internet and focus on the MAC Clone section.
3 ) Choose an option as needed (enter the MAC address if Use Custom MAC Address is selected), and click SAVE.
Tips: · Some ISP will register the MAC address of your computer when you access the internet for the first time
through their Cable modem, if you add a router into your network to share your internet connection, the ISP will not accept it as the MAC address is changed, so we need to clone your computer’s MAC address to the router. · The MAC addresses of a computer in wired connection and wireless connection are different.
· Modify the LAN IP address of the router.
Note: Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, which may conflict with the IP range of your existing ADSL modem/router. If so, the router is not able to communicate with your modem and you can’t access the internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1.
1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2 ) Go to Advanced > Network > LAN. 3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1
as an example. 4 ) Click Save.
· Restart the modem and the router. 100

1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it get a solid cable
or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. · Double check the internet connection type. 1 ) Confirm your internet connection type, which can be learned from the ISP. 2 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set
for the router. 3 ) Go to Advanced > Network > Internet. 4 ) Select your Internet Connection Type and fill in other parameters. 5 ) Click Save.
6 ) Restart the modem and the router again. · Please upgrade the firmware of the router. If you’ve tried every method above but still cannot access the internet, please contact the technical support.
Q5 What should I do if I can’t find my wireless network or I cannot connect the wireless network?
If you fail to find any wireless network, please follow the steps below: · Make sure the wireless function of your device is enabled if you’re using a laptop with
built-in wireless adapter. You can refer to the relevant document or contact the laptop manufacturer.
101

· Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled. · On Windows 7 1 ) If you see the message No connections are available, it is usually because the wireless function is disabled or blocked somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. · On Windows XP 1 ) If you see the message Windows cannot configure this wireless connection, this is usually because windows configuration utility is disabled or you are running another wireless configuration tool to connect the wireless. 2 ) Exit the wireless configuration tool (the TP-Link Utility, for example). 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window. 4 ) Expand Services and Applications > Services, find and locate Wireless Zero Configuration in the Services list on the right side. 5 ) Right click Wireless Zero Configuration, and then select Properties. 6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below: · Check the WLAN LED indicator on your wireless router/modem. · Make sure your computer/device is still in the range of your router/modem. Move it
closer if it is currently too far away. · Go to Wireless or Advanced > Wireless > Wireless Settings, and check the wireless
settings. Double check your wireless Network Name and SSID is not hided. If you can find your wireless network but fail to connect, please follow the steps below: · Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless network for the first time. This PIN number is different from the Wireless Password/Network Security Key, usually you can only find it on the label of your router.
102

2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Wireless Password/Network Security Key.
3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router.
Note: Wireless Password/Network Security Key is case sensitive.
· Windows unable to connect to XXXX / Can not join this network / Taking longer than usual to connect to this network: · Check the wireless signal strength of your network. If it is weak (1~3 bars), please move the router closer and try again. · Change the wireless Channel of the router to 1, 6 or 11 to reduce interference from other networks. · Re-install or update the driver for your wireless adapter of the computer.
103

FCC compliance information statement

Product Name: AX6600 Tri-Band Wi-Fi 6 Router Model Number: Archer AX90

Component Name I.T.E. Power Supply

Model
S042-1A120330VU

Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

· Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

104

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
FCC compliance information statement
Product Name: I T E Power Supply Model Number: S042-1A120330VU Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp- link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp- link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
105

· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2021-12-08
106

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
2400 MHz -2483.5 MHz(20dBm) 5150 MHz -5250 MHz(23dBm) 5470 MHz -5725 MHz (27dBm)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/ EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.
National restrictions
Attention: This device may only be used indoors in all EU member states and EFTA countries.
AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
107

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Caution:
1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. DFS (Dynamic Frequency Selection) products that operate in the bands 54705600MHz and 5650-5725MHz.
Avertissement:
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
2. Les produits utilisant la technique d’atténuation DFS (sélection dynamique des fréquences) sur les bandes 5470-5600MHz et 5650-5725MHz.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements:
.
108

NCC Notice & BSMI Notice:

5.7.9.1 5.7.9.2

· ·
· ·
·
·

Equipment name AX6600 Tri-Band Wi-Fi 6 Router

Type designation (Type) Archer AX90

nit

Lead (Pb)

Restricted substances and its chemical symbols

Mercury
(Hg)

Cadmium
(Cd)

Hexavalent chromium
(Cr+6)

Polybrominated
biphenyls
(PBB)

PCB

–

Polybrominated diphenyl ethers
(PBDE)

109

1.0.1 wt %0.01 wt % Note 1″Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2″” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3.- Note 3The “-” indicates that the restricted substance corresponds to the exemption.

, .

Safety Information
· Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. If you need service,
please contact us. · Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended · Do not use the device where wireless devices are not allowed. · Adapter shall be installed near the equipment and shall be easily accessible. · Use only power supplies which are provided by manufacturer and in the original
packing of this product. If you have any questions, please don’t hesitate to contact us.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanations of the symbols on the product label

Symbol

Explanation DC voltage

AC voltage

Class II equipment

Polarity of output terminals 110

Symbol

Explanation Energy efficiency Marking

Indoor use only

Caution

Operator’s manual
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

111