Lindby 8032377 Ismera LED Ceiling Light Instruction Manual

Lindby 8032377 Ismera LED Ceiling Light

Product Information:

• Revision: 2.1
• Model Number: 8032377
• LED Board: L9002186
• Power Supply: 220-240V ~ 50Hz
• Intended Use: Stationary indoor use as a ceiling lamp

Product Usage Instructions

1. Check the package contents to ensure everything is included. –
2. Ceiling Lamp
3. 1 Set of Montageanleitung (Mounting Instructions)
4. 1 Set of Montage material (Installation Hardware)
5. Identify the Live conductor (L) and Neutral conductor (N) for electrical connection
   • The Live conductor (L) is the wire responsible for carrying the electrical current.
   • The Neutral conductor (N) is the wire responsible for completing the electrical circuit.
6. Install the ceiling lamp according to the provided Montageanleitung (Mounting Instructions).
   • Follow the step-by-step instructions carefully to ensure proper installation.
   • Use the provided Montagematerial (Installation Hardware) for mounting.
7. Connect the Live conductor (L) and Neutral conductor (N) to their respective terminals on the ceiling lamp.
   • Make sure to securely connect the wires to avoid any electrical hazards.
   • Refer to the provided diagrams for proper wire connection.
8. Once the electrical connections are made, mount the ceiling lamp onto the ceiling.
   • Ensure that the lamp is securely attached and properly aligned.
9. Switch on the power supply and test the functionality of the ceiling lamp.
   • If the lamp does not turn on or functions improperly, double-check the electrical connections and consult a professional if needed.
     Note: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm, but is not protected against water. Avoid installing the lamp in areas with excessive moisture or humidity. Please refer to the EAN barcode (4251911742817) for any additional product information or inquiries.

Intended use
Provided for stationary indoor use on ceilings

Safety Precautions

L

| Live conductor
---|---
|

Earth conductor

N

|

Neutral conductor

Description of how the light works without the remote control unit
The most recently configured light setting is always displayed (memory effect) By the wall switch you can choice the following ligh modes

• 100 % cold white illumination at 6500K
• Brightness 100% 2700K
• Brightness 100% 4000K

You can select it, with short turn on and turn off of the lamp.

Description of how the light works with the remote control unit
The most recently configured light setting is always displayed (memory effect) The synchronous control of several lights is not foreseen.

Operation of the remote control

• On/Off
• On/Off: Night light
• 3&4. The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the wärmest or coldest colour setting being reached.
• 5 & 6. Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the maximum or minimum brightness being reached.

Set up remote control
Press and hold key 6 and switch on light using wall switch. After 5 seconds the light will flash once, signalizing successful coding

Declaration of Conformity

Hereby, Trio Leuchten GmbH. Gut Nierhof 17, D-59757 Arnsberg, declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.trio-leuchten.de

This product contains a light source of energy efficiency class E| QR| EAN
---|---|---

| 4251911742817

Replaceable (LED only) light source by a professional.

Replaceable control gear by a professional.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>