NETGEAR GS724Tv4 ProSAFE Gigabit Ethernet Smart Switch Specifications And Datasheet

: June 12, 2024
: NETGEAR

NETGEAR GS724Tv4 ProSAFE Gigabit Ethernet Smart Switch

NETGEAR-GS724Tv4-ProSAFE-Gigabit-Ethernet-Smart-Switch-
Productimg

Introduction

The NETGEAR® new generation of Gigabit Smart switches offers new, powerful L2+/Layer 3 Lite features with enhanced performance and usability. They are purposely designed for the future where increased traffic and application- oriented tasks demands more intelligence at the edge, higher reliability, and improved network efficiency on top of operational cost savings and ease of management.

There are two products in this series: a 24-port and a 48-port Gigabit Ethernet Smart switch. The GS724T comes with 2 dedicated Gigabit SFP ports for fiber connectivity while the GS748T comes with 2 dedicated Gigabit SFP and 2 combo copper/ SFP ports, all with an increased number of simultaneously connected ports. This new generation of Gigabit Smart Switch from NETGEAR is the optimized solution providing the best value at an affordable SMB price point.

Highlights

Designed for Converged Networks, Big or Small

Gigabit speed with non-blocking architecture supporting 100% Gigabit throughput
Auto Voice VLAN for fast and reliable deployment of VoIP
Auto Video VLAN, following the same concept of Auto Voice, helps speed up your deployment of an IP-based surveillance system
Static routing helps to route internal traffic for more efficient use of network resources
IGMP and MLD snooping, providing advanced multicast filtering

Build a Future-proof Network with NETGEAR

Solid performance with a non-blocking architecture, 16K MAC addresses, 256 VLANs, 100 shared ACL entries, 32static routes, and 512 Multicast Groups
Comprehensive IPv6 supporting management, QoS, and ACL, ensuring investment protection and a smooth migration to an IPv6-based network
Dedicated SFPs instead of combo ports, offering more connectivity ports and providing better value and usability at no extra cost
Energy Efficient Ethernet (IEEE802.3az) support for more energy saving in the future when more IEEE-compliant end devices come to market
Advanced QoS with IPv4/IPv6 traffic filtering and prioritization
Dynamic VLAN assignment for easy user authentication and location-independent access to a network
Multicast VLAN Registration for eliminating unnecessary multicast traffic and improve the efficiency of network utilization

Network Development Made Easy

Auto Voice VLAN for easy development of VoIP
Auto Video for simple deployment of IP Surveillance
ACL Wizard for a guided tour to set up your network access control
Network Management System (NMS300), allowing all NETGEAR business products to be deployed and managed through this single management interface

Small IT, not Big IT

Easy to manage via web-based management GUI for multi-switch deployment
Standard-based technology ensures interoperability with any standard-based devices in the existing network
Dual firmware images, improving reliability and uptime to your network
Worry-free with NETGEAR limited lifetime hardware warranty*
Assist with customer deployment with 1-year Free 24×7 advanced Technical support*

Hardware-at-a-Glance

| | FRONT| REAR
---|---|---|---
Model Name|

Form-Factor

|

10/100/1000Base-T RJ45 ports

|

100/1000X Fiber SFP ports

| Power Supply|

Fans

GS724T: 24-port 1000base-T Gigabit Smart Switch

24 Gigabit copper ports
2 dedicated SFP ports
Fanless

Software-at-a-Glance

Management

| IPv4 / IPv6 Multicast filtering|

Auto-VoIP

| EEE (802.3az)

Auto-EEE

|

VLANs

|

Convergence

---|---|---|---|---|---
Web GUI: HTTPs;

RMON SNMP

| IGMP and MLD

Snooping

|

Yes

|

Yes

| Static, Voice Video,

MAC,

Protocol-based

| LLDP-MED, RADIUS, 802.1X

Performance-at-a-Glance

Model Name

|

Packet buffer

|

ACLs

| MAC address table

VLANs

Multicast Group

|

Fabric

| Static Routes

IP interfaces

---|---|---|---|---|---

GS724T

GS748T

|

2Mb

|

100 shared ACLs

(MAC, IP4 and IPv6)

|

16K MAC

256 VLANs

512 Multicast Groups

|

all models

line-rate

|

32 static routes

IPv4

Features and Benefits

Hardware Features

Dedicated SFP Fiber Uplinks: Dedicated SFP ports provide fiber uplinks without sacrificing any downlink Gigabit port. Up to 4 SFP ports provide not only redundant uplinks but can also build dual redundancy by a trunked uplink with link aggregation and failover, the dual-redundancy, a powerful design for network virtualization.
Fanless Design (GS724T): Quiet operation makes these switches an ideal solution for business environments which favor no noise from networking gears such as libraries, classrooms, offices and etc.
Energy Efficient Ethernet (IEEE 802.3az): Maximum power reduction for ongoing operational cost savings.

Software Features

Dynamic VLAN Assignment: IP phones and PCs can authenticate on the same port but under different VLAN assignment policies. Users are free to move around and enjoy the same level of network access regardless of their physical location in the network
Static Routing: A simple way to provide segmentation of the network with internal routing through the switch – reserving the router for external traffic routing only, making the entire network more efficient.
Comprehensive IPv6 Support for Management, ACL, and QoS: Build the current network with the future in mind. Ensure investment protection and a smooth migration to an IPv6-based network without switch replacement
IGMP Snooping and MLD Snooping: Facilitate fast receiver joins and leaves for multicast streams. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need for an extra multicast router.
Robust Security Features: Build a secured, converged network with all types of traffic by preventing external attacks and blocking malware while allowing secure access for authorized users
- 802.1x authentication
- DHCP Snooping
- Port-based security by locked MAC
- ACL filtering to permit or deny traffic based on MAC and IP addresses
Auto Voice and Auto Video: Automatic Voice over IP prioritization with Auto-VoIP simplifies most complex multi-vendor IP telephones deployments either based on protocols (SIP, H323 and SCCP) or on OUI bytes (default database and user-based OUIs) in the phone source MAC address; providing the best class of service to VoIP streams (both data and signaling) over other ordinary traffic by classifying traffic, and enabling correct egress queue configuration. When deployed IP phones are LLDP-MED compliant, the Voice VLAN will use LLDP-MED to pass on the VLAN ID, 802.1P priority, and DSCP values to the IP phones, accelerating convergent deployments
Comprehensive QoS Features: Advanced controls for optimized network performance and better delivery of mission-critical traffic such as voice and video
- Port-based or 802.1p-based prioritization
- Layer 3-based (DSCP) prioritization
- Port-based egress rate limiting
DHCP Snooping: Ensure IP address allocation integrity by allowing only clients with specific IP/MAC addresses to have access to the network
Dual Firmware Images and Configuration Files: Dual firmware image and dual configuration file for transparent firmware updates/configuration changes with minimum service interruption
Protected Ports: Ensure no exchange of unicast, broadcast, or multicast traffic between the protected ports on the switch, therefore, improve the security of your converged network where your sensitive phone conversation can stay private and your surveillance video clips can be forwarded to their designated storage device without leakage or alteration
Dynamic ARP Inspection: Prevents a class of man-in-the-middle attacks, where an unfriendly station intercepts traffic for other stations by poisoning the ARP caches of its unsuspecting neighbors
Multicast VLAN Registration: Eliminates the replication of the same multicast traffic for every VLAN by sending multicast traffic only on to the dedicated multicast/source VLAN, resulting in more efficient utilization of network bandwidth

Example Application

NETGEAR-GS724Tv4-ProSAFE-Gigabit-Ethernet-Smart-Switch-
img-1

Why is the NETGEAR latest generation of Gigabit Smart switch the right choice for SMBs?
NETGEAR Gigabit Smart switches offer the best return on your investment:

Well-staged for future network upgrade with Gigabit to desktop and network virtualization
Cost-effectively bring intelligence to the edge of the network with traffic management features from the Smart switches
Improved usability for easier and smoother deployment of voice, video and WLAN on the same converged platform
Limited lifetime* warranty and 1-year free advanced Tech support for peace-of- mind

Technical Specifications

Interfaces: 24 10/100/1000 Mbps auto-sensing Gigabit-Ethernet switching ports, and two dedicated 1000M SFP fiber ports

Performance Specification

Forwarding modes: Store-and-forward
Bandwidth: 52 Gbps
Priority queues: 8
Priority queuing: Weighted Round Robin (WRR)
MAC Address database size: 16k media access control (MAC) addresses
Addressing: 48-bit MAC address
Multicast groups: 512
Number of static routes: 32
Number of routed VLANs: 15
Number of ARP Cache entries: 512
Number of DHCP snooping bindings: 8K
Number of DHCP static entries: 1024
ACL: 100 shared for MAC, IP and IPv6 ACLs
Jumbo frame support: up to 9K packet size
Acoustic noise (ANSI-S10.12): 0 dBA
Mean Time Between Failures (MTBF): 567,680 hours

L2 Services – VLANs

IEEE 802.1Q VLAN Tagging: Yes
Protocol based VLANs: Yes
MAC based VLANs: Yes
Voice VLAN: Based on phones OUI bytes (internal database, or user-maintained) or protocols (SIP, H323 and SCCP)
Protocol-based VLAN: Yes

L2 Services – Availability

IEEE 802.3ad – LAGs: Yes
LACP: Yes (26 LAGS with max. of 8 members in each LAG) ****
Broadcast Storm Control: Yes
IEEE 802.3x (Full Duplex and flow control): Yes
IEEE 802.1D Spanning Tree Protocol: Yes
IEEE 802.1w Rapid Spanning Tree: Yes
IEEE 802.1s Multiple Spanning Tree: Yes

L2 Services – Multicast Filtering

IGMP Snooping (v1, v2 and v3): Yes
MLD Snooping Support (v1 and v2): Yes
IGMP Snooping Queries: Yes
Block Unknown Multicast: Yes
Multicast VLAN Registration: Yes

L2 Services – Multicast Filtering

IGMP Snooping (v1, v2 and v3): Yes
MLD Snooping Support (v1 and v2): Yes
IGMP Snooping Queries: Yes
Block Unknown Multicast: Yes
Multicast VLAN Registration: Yes

L3 Services – DHCP

DHCP Client: Yes
DHCP Snooping: Yes

L3 Services – IPv4 Routing

Static Routing: Yes
VLAN Routing: Yes
IP Source Guard: Yes

Network Monitoring and Discovery Services

802.1ab LLDP: Yes
SNMP: v1, v2c, v3
RMON 1,2,3,9: Yes

Network Traffic

Access Control Lists (ACLs): L2 / L3 / L4
IP-based ACLs (IPv4 and IPv6): Yes
MAC-based ACL: Yes
TCP/UDP-based ACL: Yes
MAC lockdown: Yes
MAC lockdown by the number of MACs: Yes
IEEE 802.1x Radius Port Access Authentication: Yes

Network Traffic

Port-based security by locked MAC addresses: Yes
Dynamic VLAN Assignment: Yes
Dynamic ARP inspection: Yes

Quality of Service (QoS)

Access Lists: Yes
L2 MAC, L3 IP and L4 Port ACLs: Yes
Egress rate limiting: Yes
Support for IPv6 fields: Yes
DiffServ QoS: Yes
IEEE 802.1p COS: Yes
Dst MAC and IP: Yes
IPv4 and v6 DSCP: Yes
IPv4 and v6 TOS: Yes
WRR (Weighted Round Robin): Yes
Strict Priority Queue Technology: Yes
Auto-VoIP: Yes, based on protocols (SIP, H323 and SCCP) or on OUI bytes (default database and user-based OUIs) in the phone source MAC address
Auto Video: Yes
Port Mirroring: Yes

Management

Password Management: Yes
Configurable Management VLAN: Yes
Admin Access Control via Radius and TACACS+: Yes
Web-based Graphical User Interface (GUI): Yes
IPv6 Management: Yes
Dual Software (firmware) Image: Yes
Dual Configuration File: Yes
SNMP v1/v2C: Yes
SNMP v3 with Multiple IP Addresses: Yes
RMON 1,2,3,9: Yes
Port Mirroring: Yes
Many to One Port Mirroring: Yes
Cable Test Utility: Yes
SSL/HTTPS and TLS v1.0 for Web-based access: Yes
File Transfers (uploads, downloads): TFTP / HTTP
HTTP Download (firmware): Yes
Syslog (RFC 3164): Yes

LEDs

Per Port: Speed, Link, Activity
Per Device: Per Device Power and Fan (GS748T only)

Physical Specifications

Weight (kg): 2.74 kg 3.46 kg
Dimensions (WxDxH) mm: 440 x 204 x 43 mm 440 x 257 x 43 mm

Power Consumption (when all ports used, line-rate traffic and max PoE if applicable)

Worst case, all ports used, line-rate traffic: 17.4W

Environmental Specifications

Operating

Operating Temperature: 32° to 122°F (0° to 50°C)
Humidity: 90% maximum relative humidity, non-condensing
Altitude: 10,000 ft (3,000 m) maximum

Storage

Storage Temperature: – 4° to 158°F (–20° to 70°C)
Humidity (relative): (relative) 95% maximum relative humidity, non-condensin
Altitude: 0,000 ft (3,000 m) maximum

Electromagnetic Emissions and Immunity

Certifications: CE mark, commercial FCC Part 15 Class A, VCCI Class A Class A EN 55022 (CISPR 22) Class A Class A RCM EN 50082-1 EN 55024 CCC

Safety

Certifications: CE mark, commercial CSA certified (CSA 22.2 #950) UL listed (UL 1950)/cUL IEC 950/EN 60950

Warranty and Support

Hardware Limited Warranty: Limited Lifetime*
*Lifetime 24×7 online Technical Support:* Limited Lifetime
Lifetime Next-Business-Day (NBD) Replacement: Limited Lifetime*

ProSUPPORT OnCall 24×7**

Category 1
PMB0311 (1 yr)
PMB0331 (3 yr)
PMB0351 (5 yr)

Package Contents

Gigabit Smart Switch
Power cord
Rack mount kit
Installation guide

Ordering Information

GS724T-400AJS: Asia
GS724T-400EUS: Europe
GS724T-400INS: India
GS724T-400NAS: North America and Latin America
GS724T-400PRS: China

Optional Modules and Accessories

AGM731F: 1000Base-SX SFP GBIC (Multimode)
AGM732F: 1000Base-LX SFP GBIC (Single mode)
AGM734-10000S: SFP Transceiver 1000BASE-T Copper RJ45 GBIC
AFM735-10000S (GS748T only, for combo port only): 100Base-FX SFP LC GBIC

This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller, and covers unmodified hardware, fans and internal power supplies – not software or external power supplies, and requires product registration at https://www.netgear.com/business/registration within 90 days of purchase; see https://www.netgear.com/about/warranty for details. Intended for indoor use only.

The NETGEAR OnCall 24×7 contract provides unlimited phone, chat and email technical support for your networking product. NETGEAR, the NETGEAR Logo, and NETGEAR Insight are trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, 1-888-NETGEAR (638-4327),
E-mail: info@NETGEAR.com, www.NETGEAR.com

FAQ’s

What is the maximum number of ports on the GS724Tv4 switch?

The GS724Tv4 switch has 24 Gigabit Ethernet ports.

Can the switch be managed remotely?

Yes, the GS724Tv4 switch supports remote management through its web interface or command-line interface (CLI).

What is the maximum PoE power budget of the switch?

The GS724Tv4 switch does not support Power over Ethernet (PoE) and does not have a power budget for PoE devices.

Is it possible to stack multiple GS724Tv4 switches together?

No, the GS724Tv4 switch does not support stacking. It operates as a standalone switch.

What are the supported management protocols for the switch?

The GS724Tv4 switch supports SNMP v1/v2c/v3, RMON, and HTTP/HTTPS for management purposes.

Can I configure VLANs on this switch?

Yes, the GS724Tv4 switch supports VLAN (Virtual Local Area Network) configuration, allowing you to segment your network into multiple logical networks.

Does the switch support Quality of Service (QoS) features?

Yes, the GS724Tv4 switch offers QoS features such as traffic prioritization, rate limiting, and QoS based on IP address, VLAN, or DSCP.

What is the switching capacity of the GS724Tv4 switch?

The GS724Tv4 switch has a switching capacity of 48 Gbps.

Can I use the switch in a rack-mount configuration?

Yes, the GS724Tv4 switch includes rack-mounting brackets, allowing you to mount it in a standard 19-inch rack.

Is there a warranty provided with the switch?

Yes, the GS724Tv4 switch comes with a limited lifetime warranty from NETGEAR.

Does the switch support Link Aggregation (LAG) or port trunking?

Yes, the GS724Tv4 switch supports Link Aggregation Control Protocol (LACP) for creating link aggregation groups and increasing bandwidth between the switch and other devices.

Download This PDF Link:NETGEAR GS724Tv4 ProSAFE Gigabit Ethernet Smart Switch Specifications And Datasheet