thermaltake CL-W243-CU12SW-A Pacific C360 DDC Hard Tube Liquid Cooling Kit Instructions

thermaltake CL-W243-CU12SW-A Pacific C360 DDC Hard Tube Liquid Cooling Kit Instructions

C360 DDC HARD TUBE LIQUID COOLING KIT

The C360 DDC Hard Tube Liquid Cooling Kit is a high-performance cooling solution for your computer. It is designed to efficiently cool your CPU and maintain optimal temperature levels during intense usage. This kit includes various components such as a CPU water block, pump/reservoir, fan and radiator, and accessories.

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.
Improper installation may result in damage to your equipment. Before you start using this product please follow these basic guidelines:

1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant.
3. Please remove your graphics card from your motherboard to ensure the safest process and in order to prevent any possible damages to your CPU and motherboard.
4. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either.

Product Usage Instructions:

1. Before starting the installation, ensure that your computer is
   powered off and unplugged.

2. Identify the components from the parts list included in the
   kit.

3. Install the CPU water block onto your CPU. Refer to the CPU
   water block installation guide for detailed instructions.

4. Connect the pump/reservoir to the CPU water block using the
   provided conversion cable.

5. Mount the fan and radiator assembly in a suitable location
   inside your computer case. Ensure proper airflow and
   clearance.

6. Attach the fans to the radiator using the fan screws
   provided.

7. Connect the fans to the motherboard using the PWM cables. Refer
   to your motherboard’s manual for the appropriate fan header
   connections.

8. Install any additional accessories included in the kit, such as
   the motherboard signal bridge cable or PWM cable extensions, if
   required.

9. Ensure all connections are secure and properly tightened.

10. Fill the reservoir with coolant following the manufacturer’s
    instructions. Take caution not to overfill.

11. Power on your computer and verify that the liquid cooling
    system is functioning correctly.

Note: It is recommended to refer to the detailed installation guide provided with the product for specific instructions and diagrams. Improper installation may result in damage to your computer components or ineffective cooling performance.

Parts List:

• CPU Water Block – 01 x 1
• Conversion Cable (Silver) – 37 x 4
• Pump / Reservoir – 11 x 1
• Fan & Radiator – 14 x 4, 15 x 4, 16 x 4
• Accessory – 21 x 1, 22 x 12, 23 x 12, 24 x 12, 25 x 1, 26 x 2, 27 x 6, 28 x 8, 29 x 1
• Motherboard Signal Bridge Cable (ASUS, MSI, ASROCK) – 30 x 1
• Motherboard Signal Bridge Cable (GIGABYTE) – 31 x 1
• PWM Cable – 32 x 1, 33 x 1, 34 x 1, 35 x 1, 36 x

CPU Water Block

Pump / Reservoir

Fan & Radiator

Accessory

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>