ANTARES SISTEMAS R16 UHF Card Reader Instructions
- June 12, 2024
- ANTARES SISTEMAS
Table of Contents
ANTARES SISTEMAS R16 UHF Card Reade
Introduction
he R16 is an integrated UHF reader with multi-protocol compatibility, fast read rate, multi-tag reading, and waterproof design. It can be widely used in various RFID systems.
Product specification
- Support ISO18000-6B and EPC Class1 GEN2 international standards;
- Integrated structure design, beautiful appearance, suitable for outdoor environment;
- Integrate high-performance linear polarized antennas, Recognize the long range distance stably;
- Supports tag echo signal detection, tag data filtering, clock stamping, and input and output functions;
- Recognition speed is fast, and the identification of single label can reach 140 times/second;
- Adopt frequency hopping working mode, strong anti-interference ability and high recognition sensitivity;
- Support sp) development in multiple languages, such as VC, VB, C, etc. Supports online upgrades, has a rich communication interface, and can be customized to the needs of users.
Application
Warehouse Management、Supply Chain Management、Vehicle Management、Line Management 、Source Management、Asset Management 、Personnel Management 、Attendance Management、Product Anti-counterfeiting Management
Technical parameters
| model | R16 |
|---|---|
| Supported protocols | ISO18000-6B，ISO18000-6C（EPC GEN2） |
| working frequency | ISM 902 ～ 928MHz and ISM 865 ～ 868MHz ， Other frequency |
standards
(customized)
Operation mode| Fixed Frequency or Software Programmable
RF power| 0~30dBm，Software Programmable
Reading speed| Single card average reading is 64bits, less than 6ms, Software
Programmable
Work mode| reading Active and reading passive, Software Programmable
Communication
Ports
| N:Wiegand26/34/98, RS485,RS232 ,USB
E:Wiegand26/34/98, RS232,TCP ,USB
Input interface| 1 way trigger input
Status indicators| buzzer
Antenna| 7dbi circular antenna
Power supply| DC＋9V
Size| 215mm×215mm×50mm
Weight| 0.8 Kg（Package:1.8kg）
Operation Temp| -20℃~+70℃
Output format setting
Connecting devices and software
Connect the card reader with the computer, double-click to open the
application program , andclickthereadbutton. The current format of the card
reader will be displayed in the status box on the right side of the software.
If the connection fails, see the figure below
Reader status output format
Output format setting
Reader type settings
Restore factory settings and version number query
Prefix and suffix data entry
Prefix and suffix settings
Fill in the prefix and suffix that need to be added here, up to four bytes.
After completing, click the setting buttonbehind,the status window on the
right side will display the successful setting, as shown in the figure:
915M machine information
Card search interval value refers to the time interval between two card
readings. The larger the value, thelongertheinterval time;
Card filtering times refer to the number of repeated card readings. The larger
the value, the longer the interval between repeated readings;
Output interface setting, open or close the corresponding interface according
to requirements, click the settings button to complete the setting;
The default baud rate is 9600, select the required value and click the right
setting button to complete the setting; Add a serial port input terminator,
enter the character to be set in the input window, and click the set button to
complete the setting;
RF power setting, the greater the value, the higher the power, the farther the
sensing distance, enter the requiredvalue,click the setting button to complete
the setting;
Wiegand output format, enter the corresponding value, representing the
corresponding format, click the settingbuttontocomplete the setting;
Wiegand value location, 12-byte card number, fill in the required location,
click the set button to complete thesetting;
Wiegand low-level pulse width range and Wiegand idle-level pulse width range,
fill in the value to be set (0x01~0xFF), clickthe setting button to complete
the setting, as shown below:
