anko 43277636 On Air Neon Sign Instruction Manual
- June 12, 2024
- Anko
Table of Contents
anko 43277636 On Air Neon Sign
Product Information – ON AIR NEON SIGN
| Keycode | 43277636 |
|---|
Product Usage Instructions
The ON AIR NEON SIGN is a product designed to indicate when a broadcast or
recording session is in progress. It features a bright neon sign that
illuminates with the “ON AIR” text when activated.
To use the ON AIR NEON SIGN, follow these steps:
- Locate a suitable power outlet near the desired installation area.
- Connect the included power adapter to the ON AIR NEON SIGN.
- Plug the power adapter into the power outlet.
- Ensure that the switch on the ON AIR NEON SIGN is in the “OFF” position.
- Position the ON AIR NEON SIGN in a visible location, preferably near the entrance or control area of the broadcasting or recording studio.
- Turn on the power switch of the ON AIR NEON SIGN to activate it.
- The neon sign will illuminate with the “ON AIR” text, indicating that a broadcast or recording session is in progress.
- To deactivate the sign, simply turn off the power switch.
Note: It is important to handle the ON AIR NEON SIGN with care and avoid dropping or subjecting it to excessive force, as it may cause damage to the product.
Instructions:
- Please read this product manual carefully.
- Read all warnings and follow all instructions in this product manual.
- Use only a microfiber and dry cloth for cleaning the product,
- Operate carefully to not cause any damage by dropping or physical shocking it
- Do not leave the product in excessive heat, high temperatures can cause the product to malfunction.
- The light source of this luminaire is not replaceable.
- For indoor use only
Connecting the light:
- Plug the USB cable into a free USB port or USB wall charger with 5V 1A output.
- Switch to turn on/off the light.
- There are 2 handling holes, you can put the light on the desk or wall. (Installation pack is not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>