keystonetec FL-LED-R2B-140PS-8CSB-ST 140W High Power LED Rectangular Floodlight Instruction Manual

FL-LED-R2B-140PS-8CSB-ST
HIGH-POWER LED FLOODLIGHT140W High-Power LED Rectangular Floodlight; 120–277V Input

PRODUCT FEATURES

• Selectable wattage technology (140/100W)
• Selectable CCT technology (3000/4000/5000K)
• High power floodlight with innovative design based on established floodlight principles
• Die cast aluminum housing, with optional glare shield accessory (sold separately)
• Heavy duty, interchangeable slipfitter and trunnion mount options included
• Suitable for ground, pole, or building mount applications
• 3-pin twist lock photocell and shorting cap included with NEMA/ANSI C136.10 3-pin twist lock receptacle
• Precision-crafted optics lens with NEMA 7H x 6V, 6H x 6V, and 5H x 5V options available. See below chart for details
• Keystone 0-10V dimming driver with 12V AUX power tap and 6kV surge protection
• Ambient operating temperature: -40°C/-40°F – 50°C/122°F
• UL Certified, IP65 rated
• Power factor: > 0.95
• THD: < 20%
• LED chip lifetime: L70 > 100,000 hrs @ 25°C/77°F ambient fixture temperature
• Meets FCC Part 15, Part B, Class A standards for conducted and radiated emissions

ELECTRICAL SPECIFICATIONS

Catalog Number| Wattage| CCT| Lumens| Efficacy| Input Voltage| CRI| Dimming| Mounting| Optics Type| Photocell| Rated Life| Legacy Equivalent
---|---|---|---|---|---|---|---|---|---|---|---|---
FL-LED-R2B-140PS-8CSB-ST| 140W| 3000K| 17,500| 125 lm/W| 120– 277V| >80| 0–10V| Universal: 2 3/8” Slip Fitter or Trunnion|

7H × 6V

| Included| 50,000 hours| 400W MH
4000K| 20,300| 145 lm/W
FL-LED-R2C-140PS-8CSB-ST| 5000K| 18,900| 135 lm/W| 6H x 6V
100W| 3000K| 13,500| 135 lm/W
FL-LED-R2D-140PS-8CSB-ST| 4000K| 15,500| 155 lm/W| 5H x 5V
5000K| 14,500| 145 lm/W

Note: fixtures with 6H x 6V or 5H x 5V optics are assembled to order. Lead times may apply.

DIMENSIONS

SELECTABLE WATTAGE AND SELECTABLE CCT ADJUSTMENT INSTRUCTIONS
This fixture is equipped with field-adjustable selectable wattage and selectable CCT technology.

1. Ensure power is off to the fixture.
2. Unscrew the gasketed caps from the back of the fixture as shown in the images below.
3. Adjust dip switches to desired settings.
4. Screw on gasketed caps.
5. Restore power to fixture.

PHOTOCELL INSTRUCTIONS

This fixture comes with a 3-pin twist-lock photocell accessory.
This fixture is compatible with NEMA/ANSI C136.10-2010 3-pin twist-lock photocells.

1. Ensure power is off to the fixture.
2. Remove existing twist lock shorting cap from receptacle.
3. Push the photocell onto the receptacle and twist clockwise to lock into place.
4. For optimal performance, install the photocell with sensor director facing north as indicated on the top of the accessory. Adjust if necessary, while ensuring proper water-tight install.
5. Restore power to fixture when ready.

WIRING DIAGRAMS

EPA SPECIFICATIONS

Small-Size Fixture Housing

• Conditions: Horizontal winds only for calculations. Worst case total projected area used for calculations.
• All drag coefficients are set as worst case 1.2.
• For details on exact EPA calculations and assumptions, please contact productsupport@keystonetech.com

EPA Calcs (1.2*ft^2 | View)| Single Fixture| 2 Fixtures at 90º| 2 Fixtures at 180º
---|---|---|---
Mounting Application| Fixture Position| Housing Size| | |
Slip Fitter Mount| 45˚| S (140W)| 1.089 sq. ft.| 1.778 sq. ft.| 1.377 sq. ft.

LIGHT DISTRIBUTION PATTERN
BUILDING-MOUNT VIEW FROM ABOVE
Floodlight mounted at 30′ above ground; beam angled 30º below horizontal

GROUND-MOUNT VIEW FROM ABOVE
Floodlight mounted at 6″ above ground; beam angled 10º above horizontal; shining toward building wall from 35′ away

PHOTOMETRICS
Luminous Intensity Distribution Curve

Illuminance at a Distance

Isocandela (Rectangle)

HIGH-POWER LED FLOODLIGHT ORDERING INFORMATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>