snuza Pico 2 Baby Breathing Monitors User Guide
- June 1, 2024
- snuza
Table of Contents
PICO 2
Quick Start Guide
Pico 2 Baby Breathing Monitors
Thank you for choosing and for letting us be a part of your parenting journey.
We would love to see a photo of your little one wearing their Snuza monitor!
Please tag us on social media: @snuzamonitors
We’d greatly appreciate your review on our social media platforms or via
support@snuza.com.
Your feedback helps to further our work in promoting safe sleep for infants
worldwide.
IMPORTANT: Register your Snuza monitor to ensure that it is not a pre-
owned device. Follow the instructions in the Warranty section of this booklet.
The Snuza Family
www.snuza.com
30 Days extended warranty
IMPORTANT: proof of purchase is required to validate warranty.
This monitor comes with a 1-year warranty that starts from the date of
originalpurchase, verified by a sales receipt. We’ll extend your warranty by
30 days when you register your device within 7 days of purchase.
Here’s how to extend your warranty:
-
A. Register as a user on snuza.com/register, follow the prompts to complet registration and add your device, OR
B. If you have already registered, log in and scan the QR code below to register your device, or navigate to www.snuza.com/account/device/add/. -
Enter your device’s serial number and your child’s details.
-
Upload your proof of purchase and enter the purchase date, and save.
To get product support:
- Log into snuza.com.
- Go to your product’s dashboard and click on your device’s serial number.
- Click on the ‘Get Support’ button.
- Enter your product support query, then click the ‘Send’ button.
- We will be in contact via email to try and resolve your issue.
- If we are unable to resolve the issue, then the warranty claim process becomes available.
- You can do this either on your product’s dashboard by clicking the ‘Report fault’ button or the link provided in the email that you will receive.
If you have any feedback or questions, please contact us via your product’s dashboard by clicking the ‘Send a message’ button or email us at support@snuza.com. Welcome to the Snuza Family! The Snuza Team
Pico 2 Quick Start Guide
Snuza Connect App Setup:
- Download the Snuza Connect app.
- Follow the prompts to register.
- Activate your account via the e-mail link.
- Once activated, add the Pico 2 to your account.
- You can find the serial number on the side of the Pico 2 by lifting its top lever.
Snuza Pico 2 Device Setup:
Charge your Snuza Pico 2
- Attach the micro USB power cord to the charging cradle base. A red light will appear on the charging cradle base to indicate it has power.
- Open the charging cradle lid and place your Pico 2 in the correct position.
- Close the lid.
- The battery light on the Pico 2 will flash while charging and turn solid green when fully charged.
Attach your Snuza Pico 2:
- Lift the Pico 2’s top lever to release the clip. (fig.1)
- Fold over the top edge of the nappy/diaper and attach the Pico 2 to your child’s nappy/diaper. Keep your fingers between the Pico 2 and child’s skin. Check that the Pico 2 has a snug fit. (fig.2)
- Ensure that the clip is properly closed once placed. (fig.3)
- Check that no skin is pinched by gently sweeping your fingers between the skin and clip. (fig.4)
Switch your Pico 2 on and start monitoring:
-
Switch the Pico 2 on by briefly pressing the power button.
-
All indicator lights will flash and a start-up tone will be heard.
-
Alternatively, switch the Pico 2 on by pressing the power button in the app.
The start-up tone will be silent if controlled via the app. -
Only use the Pico 2 when your child is in a motionless bed/cot.
Scan the QR code for the full instruction manual
IMPORTANT: Update your Pico 2’s firmware before use
For support contact us through support@snuza.com
Regulatory Information : FCC compliance statement for Pico and charging cradle. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. This device meets the FCC requirements for RF exposure in public or uncontrolled environments. Canadian regulatory statement for Pico and charging cradle. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B). This device complies with the safety requirements for RF exposure in accordance with RSS-102 Issue 5 for portable use conditions. Disclaimer: Customers use this monitor at their own risk. Snuza International (Pty) Ltd, its members, employees, agents, contractors, representatives, manufacturers, distributors and associates (”SNUZA”) shall not be held liable for any loss, damage or injury suffered by the customer or any other person arising from, or in connection with, the use or manufacture of the monitor, including loss, damage or injury suffered by the customer or any other person as a result of any defects in respect of the monitor, and all warranties, and any other liability from whatsoever cause arising, are hereby excluded. The customer hereby indemnifies Snuza International (Pty) Ltd in respect of any such liability. Guarantee: Snuza International (Pty) Ltd guarantees this product to be free from defects in materials and workmanship for a period of 12 months from the original date of purchase, verified by a sales receipt.
References
- Welcome to Snuza Baby Movement Monitors - Snuza Baby Breathing Monitors
- Register - Snuza Baby Breathing Monitors
- Welcome to Snuza Baby Movement Monitors - Snuza Baby Breathing Monitors
- Login - Snuza Baby Breathing Monitors