milwaukee 58-14-2344d1 Women’s Heated Axis Vest Instruction Manual

milwaukee 58-14-2344d1 Women’s Heated Axis Vest

WARNING: To reduce the risk of injury, user must read and understand operator’s manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

ELECTRICAL SAFETY

• Do not expose heated vest to rain or wet conditions. Water will increase the risk of electric shock.
• Do not abuse the power cable. Never use the cord for carrying, pulling or unplugging the heated vest. Keep cord away from heat, oil, sharp edges or moving parts.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when using the heated vest. Do not use while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention may result in serious personal injury.

POWER TOOL USE AND CARE

• Do not use the heated vest if the power button does not turn it on and off. Any heated vest that cannot be controlled with the power button is dangerous and must be repaired.
• Disconnect the battery pack from the heated vest before storing. Such preventive safety measures reduce the risk of starting the heated vest accidentally.
• Store out of the reach of children and do not allow persons unfamiliar with these instructions to operate the heated vest. Heated vest can be dangerous in the hands of untrained users.
• Maintain heated vest. Check for breakage of parts and any other condition that may affect the heated vest’s operation. If damaged, have the heated vest repaired before use.
• Use the heated vest in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the heated vest for operations different from those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use heated vest only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

SERVICE

• Have your heated vest serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the heated vest is maintained.

SPECIFIC SAFETY RULES FOR HEATED VEST

Read instructions carefully.

Use

• Do not use this heated vest with an infant, child, a helpless person, or anyone insensitive to heat, such as a person with poor blood circulation.
• If you have a medical condition making you sensitive to overheating, or you use any personal medical devices, consult the device manufacturer and/or your physician to determine if use of this product is appropriate.
• Never use if inner liner is wet.
• Heating elements are not recommended to touch bare skin.
• Shut off power immediately if discomfort occurs.
• Do not allow the cords to be pinched.
• If improper operation of this heated vest is observed, discontinue its use immediately and contact a MILWAUKEE service facility for repair.
• Do not use pins. They may damage the electric wiring. Care:
• Before washing, disconnect and remove battery pack and battery controller from battery controller pocket. Push the power cord completely into the battery controller pocket and fasten closed. Zip center front zipper closed before washing.
• Follow Care Instructions on vest tags. Machine wash, Gentle Cycle in warm water. Tumble Dry Low Heat.
• Do not bleach.
• Do not iron.
• Do not wring or twist.
• Do not dry clean. Do not use dry-cleaning fluid on this heated vest. Do not bleach. Cleaning solvents may have a deteriorating effect on the insulation of the heating element.
• Always use common sense and be cautious when using tools. It is not possible to anticipate every situation that could result in a dangerous outcome. Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained professional for additional information or training.
• Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

READ AND SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE.

SPECIFICATIONS

• Cat. No ……………………………………………334 Series
  • 43-72-1000
• Volts …………………………………………………….. 12 DC
• Battery Type …………………………………………..M12™
• Charger Type …………………………………………M12™

SYMBOLOGY

• Volts
• Direct Current
• Machine wash, gentle cycle in warm water
• Do not bleach
• Do not wring or twist
• Tumble dry, low heat
• Do not iron
• Do not dry-clean

FUNCTIONAL DESCRIPTION

1. Power button
2. Power cable
3. Battery controller pocket
4. Battery controller
5. Power cable port

ASSEMBLY

WARNING: Recharge only with the charger specified for the battery. For specific charging instructions, read the operator’s manual supplied with your charger and battery.

Inserting/Removing the Battery

• To insert the battery, slide the pack into the body of the battery controller. Make sure it latches securely into place.
• Insert the power cable (from inside the pocket) into the power cable port on the battery controller.
• Push the power cable completely into the battery controller pocket and zip all pockets closed.
• To remove the battery, push in the release buttons and pull the battery pack away from the controller.

OPERATION

• To turn on, press and hold (about 2 seconds) the power button. The zone will be turned to High and the LED will light.
• The temperature setting can be adjusted at any time by pressing the power button. Each press will cycle through the temperature settings.
• To turn off, press and hold (about 2 seconds) the power button. The LED will turn off.
• If the heated gear turns off unexpectedly, check the connections and charge the battery pack. Battery controller is located inside of the pocket.

CARE

WARNING

• To reduce the risk of injury, always unplug the charger and remove the battery pack and battery controller from the heated vest before performing any maintenance.
• Never disassemble the heated vest, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.
• If the heated vest does not start or operate properly with a fully charged battery pack, clean the contacts on the battery pack. If the heated vest still does not work properly, return the heated vest, charger and battery pack, to a MILWAUKEE service facility for repairs.

WARNING: To reduce the risk of personal injury and damage, disconnect and remove battery pack and battery controller from battery controller pocket before washing. Never immerse your battery controller, battery pack, or charger in liquid or allow a liquid to flow inside them.

To clean the heated vest:

1. Remove battery pack and battery controller.
2. Push the power cord completely into the battery controller pocket and fasten closed. Zip center front zipper closed before washing.
3. Machine wash, Gentle Cycle in warm water. Do not use bleach. Do not dry clean. Do not wring or twist.
4. Tumble Dry on Low Heat. Do not iron.

ACCESSORIES

WARNING: Use only recommended accessories. Others may be hazardous.

• For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor.

Contacts

SERVICE – UNITED STATES

• 1-800-SAWDUST (1.800.729.3878)
• Monday-Friday, 7:00 AM – 6:30 PM CST
• or visit www.milwaukeetool.com

Contact Corporate After Sales Service Technical Support with technical, service/repair, or warranty questions.

• Email: metproductsupport@milwaukeetool.com
• Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important notifications regarding your tool purchases.

SERVICE – CANADA

Milwaukee Tool (Canada) Ltd

• 1.800.268.4015
• Monday-Friday, 7:00 AM – 4:30 PM CST
• or visit www.milwaukeetool.ca

LIMITED WARRANTY

LIMITED WARRANTY USA & CANADA

Every MILWAUKEE HEATED GEAR product (including its battery controller/controller) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a Heated Gear product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year* after the date of purchase. Return of a Heated Gear product to a MILWAUKEE factory Service Center location, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE personnel, misuse, alterations, abuse, normal wear and tear, or accidents.

This warranty does not cover a M12™ LITHIUM-ION Battery Pack, a M12™ Charger, or a REDLITHIUM™ USB battery; there are separate and distinct warranties available for these products. Warranty Registration is not necessary to obtain the applicable warranty on MILWAUKEE Heated Gear products. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only. Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest MILWAUKEE factory Service Center location.

WARRANTY POLICY

The ELECTRONIC INDUSTRIES warranty is for 1 year from the original date of purchase. This warranty card covers any defects in material and workmanship in that Product. To make this warranty valid, present this warranty card, closed/stamped by the dealer or store where you purchased the product, to the Authorized Service Center (ASC). Or, if this card has not been closed/stamped, please present the original proof of purchase to ASC. Call 55 4160-3547 to find the nearest ASC for service, parts, accessories or components.

Procedure to make this guarantee valid

Bring the product to ASC, along with the enclosed/stamped warranty card from the dealer or store where you purchased the product, and any defective parts or components will be replaced at no cost to you. We will cover all freight costs in connection with this warranty process.

Exceptions

This guarantee will not be valid in the following situations:

• When the product is used in a manner other than that indicated in the end user or instruction manual.
• When the conditions of use are not normal.
• When other people not authorized by TECHTRONIC INDUSTRIES modify or repair the product.

Note: If the wiring harness is damaged, it must be replaced at an Authorized Service Center to avoid electrical hazards.

SERVICE AND CARE CENTER

• Call 55 4160-3547

IMPORTED AND MARKETED BY

• TECHTRONIC INDUSTRIES, MÉXICO, S.A. DE C.V.
• Miguel de Cervantes Saavedra No.301 5th Floor, North Tower
• 11520 Colonia Enlargement Granada
• Miguel Hidalgo, Mexico City, Mexico

Warranty Card

• Model:  ………………….
• Date of purchase:  ………………….
• Distributor Seal:  ………………….

MILWAUKEE TOOL

• 13135 West Lisbon Road
• Brookfield, WI 53005 USA

Printed in China

References

• Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>