Rubbermaid 2154626 Towable 50×50 Inches Pallet Cart Instruction Manual
- June 12, 2024
- Rubbermaid
Table of Contents
Rubbermaid 2154626 Towable 50×50 Inches Pallet Cart
Product Information
The 50 x 50 Towable Pallet Cart is a versatile cart designed for transporting pallets. It features a durable construction and is equipped with casters for easy mobility. The cart also includes attachment plates, a handle, and a tow bar for added functionality. It can be fully assembled and is suitable for various industrial and commercial applications.
Product Usage Instructions
- Start by gathering the necessary tools: a drill with a 9/16 driver bit (recommended).
- Install the casters using 3/8 lag screws and 3/8 flat washers. Attach the swivel casters on the left side and the fixed casters on the right side.
- Install the attachment plates using 3/8 lag screws and 3/8 flat washers.
- With the help of two people, flip the cart onto the casters.
- Install the handle by depressing the pins and sliding the handle tubes into the receivers on the frame. Ensure that the spring-loaded pins fully expand into the holes in the receivers.
- Install the tow bar, making sure that the loop is facing the inside of the cart. Insert a 3/8 x 2.25 bolt through the frame bracket and tow bar. Tighten it using a flat washer and lock nut.
- Install the hitch pin by placing it through the frame receiver.
- Thread the chain and small pin through the loop, then insert the small pin into the hole on the hitch pin.
- Your 50 x 50 Towable Pallet Cart is now fully assembled and ready to use.
For more information or assistance, please visit our website at
www.rubbermaidcommercial.com or
contact us at 1-888-347-9800.
50″ x 50″ Towable Pallet Cart Carrito remolcable para palets de 50″ x 50″
Chariot de palettes tractable de 50 po x 50 po
Recommended Assembly with 2 people Estimated Assembly Time: 30 min.
TOOLS
WHATS IN INCLUDE
- Lay (2) 24″ x 48″ decks on the ground with the flat face facing toward the floor.
- Lay the frame onto the deck. The bottom of the frame should be flush with the web structure of the resin deck.
- Note – the spring-loaded tow bar retainer should be facing the ground.
- Note – the spring-loaded tow bar retainer should be facing the ground.
- Install casters using 3/8″ Lag Screw and 3/8″ flat washers.
- Install swivel casters on the left side, and fixed casters on the right.
- Install attachment plates using 3/8″ Lag Screw and 3/8″ flat washers.
- With 2 people flip cart onto casters.
- Using 2x – 3/8″ x 1″ bolts, attach 4x Location Posts to frame. Tighten each bolt to 20 ft-lbs.
- Install handle by depressing pins and sliding handle tubes into the receivers on the frame.
- The spring-loaded pins will expand into the holes into the receivers when installed fully.
- Install Tow Bar ensuring loop is facing the inside of the cart.
- Insert 3/8″ x 2.25″ bolt, through frame bracket and towbar. Tighten using flat washer and lock nut.
- Insert 3/8″ x 2.25″ bolt, through frame bracket and towbar. Tighten using flat washer and lock nut.
- Install Hitch Pin by placing pin through the frame receiver.
- Thread chain and small pin through loop, and then insert small pin into the hole on the hitch pin.
- Fully Assembled 50″ x 50″ Towable Pallet Cart.
- ©2022 Rubbermaid Commercial Product of Rubbermaid Commercial Products, LLC 8900 Northpointe Executive Park Drive, Huntersville, NC 28078www.rubbermaidcommercial.com Contact us: 1-888-347-9800
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>