ADEPTICO LS35UW Projector for Home Entertainment User Manual

ADEPTICO LS35UW Projector for Home Entertainment

PACKING LIST

NOTICE

Recommended

NOT Recommended

FUNCTION OVERVIEW

QUICK START

1. Connect the projector to power.

2. Press the Power Button to turn on the projector.

3. Connect your device to the projector correctly.

4. Select the correct input source to project your device.

5. Adjust the keystone ,md focus ring to get the best image performance.
   

6. Adjust the kickstand accordingly.

7. Press the Power Button twice to turn off the projector.
   

INPUT SOURCE

Press   on the projector/remote to enter the interface of Input source.

1. USB Connection
   

2. HDMI Connection
   

3.  AV Connection
   

PROJECTOR CONNECTION

WIFI CONNECTION

• Step 1:
  Go to Homepage,. SCREEN CAST,. WiFi to connect the projector to your router’sWiFi.

• Step 2:
  Select Wireless to start connecting to a working WiFi from the search list
  

SCREEN MIRRORING

• Step 1:
  Connect the projector and your mobile device to the same router’s WiFi or directly connect your mobile device to the projector’s AP hotspot.
  TIP: when you are using the projects AP hotspot the connect will be mirrored via the cellular data.

• Step 2:
  Go to Homepage> SCREEN CAST to enter the interface below.
  

• Step 3:
  select iOS Cast to enter the following interface.
  

• Step 4:
  Go to the Control Center of your iOS device, then tap Screen Mirroring/Air Playing to search for the projector.

• Step 5:
  Select PROJECTOR-*..,…**from the list. The contents on your iOS device will be mirrored to the projections screen wall after a successful connection.
  

For Android System

To activate this function, please make sure your Android device supports Multi-screen/Smart VI’!W/ Wireless Display. Names may vary on different Android devices.

• Step 1:
  Go to the WiFi settings of your Android device to switch on the option of WiFi.
  Note: Successful WiFi connection is not a must, but please make sure the WiFi is ON on your Android device.

• Step 2:
  Go to Homepage> SCREEN CAST to enter the interface below.
  

• Step 3:
  Select Miracast to enter the following interface.
  

• Step 4:
  Activate the Multi-screen/Smart View/Wireless Display function on your Android device and search for the projector.
  

• Step 5:
  Select PROJECTOR  from the list. The contents on your Android device will be mirrored to the projections screen/villa after a successful connection.
  

AUDIO OUTPUT VIA BLUETOOTH CONNECTION

Except for the 3.5mm audio jack on the projector. You can also connect Bluetooth speakers or wireless headphones to this projector vi a Bluetooth wireless connection to achieve audio output.

• Step 1:
  Turn on your Bluetooth device and make it ready for a Bluetooth connection.

• Step 2:
  Go to the Homepage> SETTINGS or press the Menu button to check the detailed settings.

• Step 3:
  Select OPTION and BT Setting, then press OK to continue.

• Step 4:
  Press the down button to turn on the option of BT setting and searching for available Bluetooth devices.

• Step 5:
  Select your Bluetooth device and pair it with the projector.

IMPORTANT
Compared with the wired connection to a speaker, Bluetooth wireless connection takes more time to process digital audio data, converrsaid data to an audio signal, and stream the signal. There may be a delay or slight lag on audio due to signal interference.
As a result, the sound on the speaker may not be in sync with the image on the projector, especially when you are using wireless screen mirroring with WiFi and Bluetooth wireless connection at the same time.
If you are experiencing this situation, please check the following options to improve audio quality:

• Instead of using wireless screen mirroring with WiFi and Bluetooth wireless connection at the same time, we recommend using wired screen mirroring and Bluetooth connection or using HDMI connection via the provided HDMI cable and Bluetooth connection simultaneously.
• If you still want to use wireless screen mirroring, it is recommended to output the audio via a wired speaker.
• Move your Bluetooth device closer to the projector.
• Keep the projector and your Bluetooth device away from other Bluetooth devices to avoid interference.
• You may be able to adjust the latency (Lip Sync) on your device which is playing the video. The way to adjust the latency varies with different devices; please consult it from the device manufacturer.
• You cannot use this projector as a Bluetooth speaker or pair your mobile device with this projector because it can only send the signal to an external Bluetooth device, but cannot receive the signal from an external Bluetooth device.
• Due to the compatibility issue between Bluetooth speakers/headphones and the projector, few Bluetooth devices may not be paired with the projector via Bluetooth wireless connection . Please contact us at customercare@projectorcs.com for further assistance.

PROJECTION DISTANCE&SIZE

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
•  Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

TROUBLESHOOTING GUIDE

The copyrighted contents from Hulu, Netflix, and similar services can not be mirrored or cast.
Due to the copyright restriction from Hulu, Netfix, and similar services, the contents MAY NOT be mirrored or cast. The contents can only be mirrored or cast by connecting a laptop, Fire TV Stick,  Roku, or Chromecast

What should I do if I want to watch the copyrighted contents from Hulu, Netflix, and similar services via the projector?
Please prepare a Fire TV stick, Roku stick or Chromecast “TM (not included], then connect it to the projector to watch the contents.

Blurry image

• Adjust the focus ring/keystone.
• The projector and screen  must be in the effective distance.

Can I play a video with 4K resolution via a USB drive?

• The 4K video contents can be presented by connecting the projector to a laptop or a lV stick, but it cannot be presented via a USB drive.

Remote unresponsive

• Make sure the remote points at IR receiver directly.
• Do not cover the IR receiver.
• Replace the old MA batteries with new ones.

Upside down images
Go to Homepage,. Settings> PICTURE,, Rotate Front Projection to flip the projection image.

Factory reset
Go to Homepage” Settings>OPTION > Restore Factory Default to restore the projector to default settings.

Why can’t I hear any sound when playing videos from my Chromecast…. , Roku, or Fire TV stick on my projector?
If you’re not hearing sound while playing videos from Netflix, Hulu, or similar apps, it may be due to copyright restrictions. To fix this, turn off Dolby or go to TV stick’s Sound Settings to select Auto Detect or PCM. This allows the projector to decode the audio, and you should hear sound.

Reduce/Enlarge the Image Size
Go to Homepage> SETTINGS,, PICTURE,. Image Scaling to enlarge or reduce the image size from 75%!0100%. ) c:ustomercare@proJecto

FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following to. No conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to partl5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Hoverer, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• increase  the separation between the equipment receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s}. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. his device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>