Witshine Toilet-Night Light User Guide
- June 7, 2024
- Witshine
Table of Contents
Witshine Toilet-Night Light User Guide
ATTENTION: PRESS & HOLD THE BUTTON FOR 5 SECONDS+ TO TRUN ON BEFORE THE FIRST USE
1 YEAR WARRANTY
– If anything goes wrong with your Witshine toilet light within 1 year, we
will send you a new one absolutely free. Email:
witshine_support@163.com
Product specifications
Sensors: PIR motion. plus photo sensor(light)
Detection Distance: 3-5m
Induction Luminous Flux: 15Iux
LED type: 0.2w mixed color LED lamp beads
Charging: Micro USB 5V DC
Package Contents
1x Motion Activated Colorful LED Night light
1 x Micro USB Cable
1 x User Manual
Easy to Setup
- Lift both the lid and seat cover of the toilet
- Secure unit in edge of the toilet by bending flexible arm creating a U-shaped like hook with LED pointing downwards towards inside of toilet bowl
- The motion sensor should face away from the toilet and towards the entry of the door
Features:
• MOTION SENSOR
– LED light turns ON when you enter, illuminating the toilet and the room.
Automatically turns OFF after 1 min of inactivity.
• LIGHT SENSITIVE:
– LED light only activates in low light or darkness for max battery life.
• RECHARGEABLE DESIGN
– Charging once can be used about 2 months depending on the brightness selling
(includes 5 levels) and frequency used, No batteries No pollution.
• 100 % WATERPROOF GUARANTEE
– 100% waterproof by fully enclosed design, the rubber stopper must be plugged
tightly while washing.
• COLOR SELECTION
– By default, the unit comes in “carousel mode” meaning ii will cycle through
all 16 colors (1 color every 4 seconds).
• a. Color Select Mode:
– To select a fixed color, hold down the button until LED blinks blue, click
button to select desired color. Wait a few seconds until LED flashes 1x.
• b. Return to carousel mode:
– If fixed color is selected, to return to carousel mode, hold down button
until LED flashes green.
• c. Adjust brightness
– Click button to cycle through 5 brightness levels
• TURN ON AND OFF
– Turn ON with pressing the button till LED blinks RED, and turn off with 5
seconds+ press till LED blinks RED
• LOW BATTERY INDICATOR
– Red LED will blink 5x, means low power
• FITS ANY TOILET
– Flexible arm wraps around edge of any toilet for a secure fit.
FAQS
1.What is the Carousel Mode?
The Default Carousel Mode which will cycle through each color automatically
every 4 seconds.
2. How do I get into the dimmer mode?
Press and release the button, the brightness will weaker a level with every
press then cycle through to the most strong. It has 5 stages dimmer levels;
just stop pressing the button on the brightness you want to use.
3. Why does it blink red when it activates?
It means your batteries are running low. Recharge it soon
4. How to light up again after LED turns off in the dark?
Wave hand in front of the motion sensor to wake tot up again
5. Is Toilet- Night light Full Waterproof?
Yes, it can be washed in the running water rubber stopper should be highly
plugged during washing
6.Can it be charged by mobile phone adapter?
Yes, it can be charged with any 5V DC output adapter.
7. Why Toilet Night light remains unlit when I pass by?
The toilet light is motion and light sensitive, which means that when there’s
too much light in the bathroom, the toilet light won’t turn on, and if there’s
no light and no motion as well, the toilet light won’t turn on. Light detector
and motion detector work together to only turn the toilet light on when it
senses darkness and movement.
Attention
- Children should be supervised to ensure that they do not play with the appliance.
- Do not expose to liquids, fire, water, rain or explosion.
- Do not disassemble.
- Do not operate product with damaged cord or plug.
- Do not throw or shake the product.
CONTACT US DIRECTLY BEFORE CONTACTING AMAZON FOR ALL CUSTOMER SERVICE NEEDS! FASTER AND MORE KNOWLEDGEABLE SERVICE, HASSLE FREE RETURNS: Email: witshine_support@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>