iGear Mini Wireless Bluetooth Earbuds User Manual
- June 12, 2024
- iGear
Table of Contents
Mini Wireless Bluetooth Earbuds
User Manual
Mini Wireless Bluetooth Earbuds
CONTENTS
Mini TWS x 1
Charging Cable x 1
SPECIFICATION
Earbuds:
Bluetooth : V5.2
Distance: 10 m
Playtime: 6Hrs
Battery: 2 x 40 mAh
Sensitivity: 101±3dB
Driver: 8 mm
Impedance: 32 Ω
Frequency: 20 Hz ~ 20 kHz
Charging Case:
Input: DC 5V/1 A
Battery: 200 mAh
No of Recharges: 1 time
Charging Time: 1 Hour
INSTRUCTIONS FOR USE
CHARGING THE CHARGING CASE
- Before using your iGear mini for the first time, please make sure that the battery is fully charged.
Here’s how:
- Connect the Type-C charging cable provided in the box to the DC 5V charging slot on the charging case;
- Connect the other end of the USB cable to a Wall Charger/Adaptor or any compatible USB port
- The red LED indicator will blink to show that the TWS is charging. Once the device is fully charged, the red LED will stay on.
CHARGING THE EARBUDS
- To charge your earbuds, simply place them into the charging case and they will start charging automatically. You’ll know charging has begun when you see a red LED light turn on inside the earbuds. Once the charging is complete, the red LED indicator light will turn off.
Note: Charge time is approximately one hour. The earbuds cannot be used
while charging. The earbuds will turn off when inserted into the charging
case.
SWITCHING THE EARBUDS ON and OFF
- The earbuds switch on automatically when removed from the charging case. ·To switch on the earbuds manually, press and hold the Touch Control button for about 3 seconds until the blue and red LED Indicator lights on the earbuds turn ON and start flashing.
- To switch off the device, press and hold the Touch Control Button for about 3 seconds until the LED indicator lights turn off, you will then hear a voice prompt indicating that the earbuds have been powered OFF.
Note: When the earbuds are switched on manually, they would need to be
switched on individually. If the earbuds have been disconnected for over 5
minutes, they will turn off automatically.
PAIRING WITH EACH OTHER
- Turn on both earbuds at the same time by removing them from the charging case or switching them on manually. After powering on the earbuds, wait for a couple of seconds once you hear a prompt the earbuds have paired to each other.
- The LED indicator on both the earbuds will flash red and blue while connecting to each other.
- When the earbuds are connected to each other, the LED Light on one earbud switches off. The other earbud’s LED Light will then flash, indicating that the earbuds are in Bluetooth pairing mode.
Note: To use the earbuds individually, remove one earbud from the charging case at a time, and connect to a Smartphone/Bluetooth device.
PAIRING WITH BLUETOOTH DEVICES
- The earbuds must be paired to a Bluetooth device before they can be used. It is only necessary to pair the earbuds once with the Smartphone/Bluetooth device.
- Please switch on your earbuds before pairing them to a Smartphone/Bluetooth device. ·Once switched on, the earbuds will automatically enter the Bluetooth Mode.
- Open the Bluetooth Menu on the device you wish to pair and select “Search for Devices” or “Add New Device” in order to pair the earbuds with your smartphone/ bluetooth device.
- Wait till you see “iGear Mini” on your device screen.
- Select “iGear Mini” on your device and follow any further prompts to pair. Once pairing is complete and a connection is established, you will hear a prompt indicating that the earbuds are successfully connected.
| FUNCTION | OPERATION |
|---|---|
| Voice Assistant | Press and hold the left / right earbud Touch Control button |
for 2 seconds.
Play or Pause Track| Tap once on the left / right earbud’s Touch Control
button.
Previous / Next Track| Double tap on the left / right earbud’s Touch Control
button.
Volume – / Volume +| Tap the left / right earbud Touch Control button 3 times.
Answer / Hang up a call| Short press the Touch Control button on either
earbuds when a call comes in or during a call.
Reject a call| Press and hold the Touch Control button on either of the
earbud’s for 2 seconds when a call comes in.
Warranty
Warranty period: 1 Year
In case of consumer complaints:
Customer Care – +91 9372667193
Email: sales@igear.asia
(Between 10am to 5pm, Mon-Fri)
www.igear.asia