STEP2 5358 Longhorn Firewood Rack and Longhorn Firewood Nest Instruction Manual

: June 12, 2024
: Step2

Table of Contents

STEP2 5358 Longhorn Firewood Rack and Longhorn Firewood Nest
Product Information
Product Usage Instructions
INCLUDED
REQUIRED
Installation
CLEANING INSTRUCTIONS
DISPOSAL INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STEP2 5358 Longhorn Firewood Rack and Longhorn Firewood Nest

STEP2-5358-Longhorn-Firewood-Rack-and-Longhorn-Firewood-Nest-
product

Product Information

The Longhorn Firewood NestTM is a high-quality outdoor furniture product designed to hold and store firewood. Crafted from premium materials, it features classic looks that can be selected, combined, and complemented to suit any desired aesthetic. The product is manufactured by The Step2 Company, LLC and is built to last.

Product Dimensions:

A x2
B x2
C x2
D x4
E x2

Optional Components:

100 lbs (45.4 kg) of sand or gravel

Manufacturer’s Address:

The Step2 Company, LLC.

10010 Aurora-Hudson Rd. Streetsboro, OH 44241 USA

Product Usage Instructions

```
1. Assembly Instructions:
```
1. Refer to the included instructions for assembling the Longhorn Firewood NestTM.
1. Optional Components:
2. If desired, fill base (A) with sand or gravel. Use approximately 50 lbs (22.7 kg) per side.
3. Tap and tilt the base (A) for even distribution of the sand or gravel.
4. Repeat steps 3a and 3b for both sides of the base until full.
5. Insert cap (B) to close the hole in the base.
1. Important Safety Instructions:
2. Do not over stack wood.
3. Do not stack wood beyond the height of the rack.
4. Inspect the product periodically and replace any damaged or worn components.
1. Cleaning Instructions:
2. Follow the provided cleaning instructions to keep the Longhorn Firewood NestTM in good condition.
Disposal Instructions:
If disposal becomes necessary, please recycle the product in compliance with all government regulations.

INCLUDED

STEP2-5358-Longhorn-Firewood-Rack-and-Longhorn-Firewood-Nest-
fig 1

REQUIRED

(Not Included)

OPTIONAL

Installation

STEP2-5358-Longhorn-Firewood-Rack-and-Longhorn-Firewood-
Nest-fig 4 STEP2-5358
-Longhorn-Firewood-Rack-and-Longhorn-Firewood-Nest-fig 5

Flip over and repeat step 1 to other side.

(Optional)

Fill base (A) with sand or gravel.
About 50 lbs. (22.7 kg) per side.

Tap and tilt the base (A) for even distribution. Repeat 3a and 3b to both sides until full. Insert cap (B) to close hole. STEP2-5358-Longhorn-Firewood-
Rack-and-Longhorn-Firewood-Nest-product

DO NOT over stack wood.
DO NOT stack wood beyond the height of the rack.

Celebrate your outdoor spaces with Step2®

Crafted from high-quality materials and featuring premium details and finishes, our line of classic looks can be selected, combined and complemented to suit any look you want.
Complete your outdoor vision from front door to backyard with our variety of outdoor furniture, package boxes, mail posts, outdoor structures, and so much more.

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

WARNING:
TIPPING HAZARD

Use the firewood rack only on hard flat surfaces.
DO NOT move the firewood rack once wood has been loaded.
DO NOT allow children to play on rack.

OBSERVE ALL STATEMENTS AND WARNINGS TO REDUCE THE LIKELIHOOD OF SERIOUS OR FATAL INJURY.

INSTALLATION

Choose the location of your firewood rack carefully.
DO NOT install on, over or near electrical wires or outlets. Check for roof lines or other structures that could shed snow, ice or excessive run off before positioning the firewood rack.
DO NOT over-stack wood.
DO NOT stack wood beyond the height of the rack.

CLEANING INSTRUCTIONS

General Cleaning:

Use a 50/50 mixture of white vinegar and water.

DISPOSAL INSTRUCTIONS

Please recycle when possible. Disposal must be in compliance with all government regulations.
INSPECT THIS PRODUCT PERIODICALLY. REPLACE DAMAGED OR WORN COMPONENTS.

Please, Call Us First!
DO NOT RETURN TO STORE

The Step2 Company, LLC.