GIMA 27403 Examination Couch Aluminium User Manual
- June 12, 2024
- GIMA
Table of Contents
GIMA 27403 Examination Couch Aluminium
All serious accidents concerning the medical device supplied by us must be reported to the manufacturer and competent authority of the member state where your registered office is located
Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
gima@gimaitaly.com –
export@gimaitaly.com
www.gimaitaly.com Made in Italy
INTRODUCTION
For the purposes of Regulation (EU) 2017/745, the product falls under the CLASS I MEDICAL DEVICES category. We advise you to read the following manual carefully before using the device. This model has been designed with the aim of limiting any risks to the user in the event of unintentional impact, by eliminating sharp edges, sharp corners, etc.
SAFETY
Use for purposes other than what it is intended for is not allowed. The manufacturer declines all responsibility for damage caused by using the product in the wrong or improper way or in a way unforeseen in the current manual. For safety reasons, replace any worn or damaged parts immediately.
MAINTENANCE / CLEANING
The 1-joint examination bed does not require any special maintenance; however, before use, it is necessary to check that all the moving parts are tightened correctly. To clean the bed, a slightly damp cloth can be used; normal detergents can also be used, provided that they do not contain chlorine and its compounds.
Attention:
- Avoid using hydrogen chloride or bleach.
ASSISTANCE
Should any of the component parts deteriorate beyond general maintenance, contact your distributor, they will be available to advise you on the most appropriate solution to every kind of problem.
WARNINGS
The information contained in this document are subject to modifications
without notice having to be given.
Disposal: the product described in this manual must be sent to specific companies for scrapping.
GENERAL INFORMATION
Examination bed with a frame made of round polished aluminum tubes Ø 30 x 2 mm
thick; fitted with an elevating, manually adjustable headrest with 1 joint and
2 sections, and upholstered in soft, easily washable faux leather. The
upholstery consists of: a chipboard base with low formaldehyde content, an
helio-cell sponge with a density of 25 kg/sq m, 4 cm thick, convenient and
comfortable.
Unassembled model supplied as a kit
TECHNICAL DATASHEET
| Dimension (L x P x H) cm | 176 x 60 x 78 |
|---|---|
| Capacity Kg | 90 |
| Net weight kg | 22.0 |
| Gross weight kg | 27.0 |
| Volume M3 | 0.21 |
| Number of necks | 1 |
| Packaging (LxDxH) Cm | 151 x 19 x 74 |
ASSEMBLING INSTRUCTIONS
Symbols
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>