NEUTYPECHIC A-MR01067 Wall Vanity Mirror Instruction Manual
- June 12, 2024
- NEUTYPECHIC
Table of Contents
NEUTYPECHIC A-MR01067 Wall Vanity Mirror
Assembly Instruction
Each package contains the following accessories for one arched or rectangular mirror:
- STEP 1
Place #A on the edges of the mirror.
- STEP 2
Place #B above #A and tighten it with #D
- STEP 3
It is recommended to pre install 2 pieces of #C on both sides of the mirror, and then measure the hole distance of #C. Drill four holes in the wall, and place #F in each hole.
- STEP 4
Use #E to fix #C to the holes on the left side of the wall.
- STEP 5
Hang the left side of the mirror at #C on the wall. Please hold the mirror carefully until completing the next step.
- STEP 6
Place
the other #C on the right side of the mirror. Use #E to fix #C in the hole in
the wall. Install #G on #C.
NEUTYPECHIC
Customer Service INFO
If you have any product related problems during your assembly or use, we will
provide faithful solutions for you. After-care will be a relief with
Neutypechic.
Please contact us: [email protected]