UBCO 2X2 Adventure Bike Instructions

PRERIDE
CHECKLIST
2×2 ADVENTURE BIKE

2X2 Adventure Bike

Before you head out on your 2X2, always check that your bike is ready to ride.

1. Check your power supply is sufficiently charged.
2. Ensure the battery strap and plug are secured tightly.
3. Ensure the lights are working: headlight, rear light, brake light and directional indicators.
4. Test the brakes & the horn are functioning properly.
5. Adjust the rear view mirrors.
6. Check the tyre pressure; inflate if needed.
7. Do a physical check to ensure all nuts, bolts, and fixings are tight and all loads are secure.
8. Always wear a helmet and appropriate clothing and footwear.

GET READY

1. Keep the bike standing in the base to help align the handlebars. Remove the protective packaging from the bike.
2. Find the Field Kit under your seat and set out the tools you’ll need.
3. Note: Remember to remove the guidance stickers after each step is completed.

Align the handlebars

1. Loosen the side bolts on the stem with a 5mm Allen key. Straighten the handlebars in line with the front wheel and so the orange dots align.
2. Once the handlebars are straight, re-tighten the stem bolts, alternating as you go to prevent damage to the clamp. Align the marking on the bolt head to achieve the correct tightness.
   Torque to 15Nm, if available.

Fit the rear indicators (turn signals)

1. Unpack the rear indicator lights.
2. Install indicators to their respective side on the rear light bracket. Check the orientation – the indicator with a long cable is fitted to left side, the short cable goes to right side.
3. Insert the thread through the mount, ensuring the nut and two washers are on the inside. Lights should face straight back. Use a 17mm spanner to tighten the fastening nuts.

Fit the mirrors

1. Remove the mirrors from their box.
2. Screw the base of the mirror arm clockwise into the handlebar mount approximately 10mm and into the correct position, but do not tighten.
3. Using a 14mm spanner, tighten the locking nut to secure the mirror arm.
4. Slide down the rubber booty.
5. Repeat for the other mirror.
6. Adjust the mirror angle from a sitting position to provide maximum visibility.

4a. Install the power supply

1. IMPORTANT: inspect the power supply; contact UBCO if there is any damage from transit.
2. If the power supply is not already in place, remove the battery strap from the frame and set aside. With the power socket on the right-hand side of the bike, carefully lower the power supply into place with both hands.
3. Plug the bike’s power plug into the power socket. Use the securing key to lock the power supply in place.
4. Secure the battery strap as shown (4b).

4b. Secure the battery strap

1. Velcro side down, tuck the end of the battery strap under the left hand bar, central to the power supply.
2. Carry the strap over the power supply and tuck it under the right hand bar. Feed the strap back through the clip and centre the clip.
3. Tighten the strap and secure it closed.

READY TO RIDE

STEP 1:
Download the UBCO App
You can download the UBCO App to view speed and battery charge, control the settings of your 2X2, and get critical updates delivered wirelessly.
Simply search for UBCO in your phone’s app store and download it for free. Make sure Bluetooth is activated on your mobile phone when connecting the app to your 2X2.

STEP 2:
Turn on the 2X2 Grab your keys and power the bike by pressing the button on the key fob 1.5 seconds until you hear a beep.
You can now open the app and connect to your bike.
See the complete riding instructions in the User Manual on page 16.

STEP 3:
Check power supply charge
View the charge level on the LCD display or on the Home and Live Dash screens of the app.
Your power supply will arrive with partial charge, enough to ride for a few minutes. Be sure to fully charge up before you plan a longer ride.

STEP 4:
Before you ride
Ensure you’ve read the user manual and are familiar with how to use the bike and proper safety precautions.
Always wear a helmet. Once you’re ready to ride, twist the throttle and GO!!!

Find UBCO online:
ubcobikes.com
fb.com/ubcobikes
instagram.com/ubcobikes
youtube.com/ubcobikes
Join the UBCO Owners group for tips and tricks from our community.
facebook.com/groups/ubcoowners

ubcobikes.com
info@ubcobikes.com
@ubcobikes #ubco2X2 UBCO 2X2 ADVENTURE BIKE
KIA ORA HELLO.

If your 2X2 has arrived in the box, here’s how to set up your new ride.
Lift up the seat to find a Field Kit with all the tools you need for assembly and some basic maintenance.
Scissors or a knife will also be handy and a torque wrench, if you have one.

Scan this QR code to watch our bike assembly video.
If you don’t feel confident putting your bike together, contact us for help.

https://qrco.de/bbhX4r

References

• UBCO Ltd
• UBCO Electric Adventure Bikes (@ubcobikes) • Instagram photos and videos
• UBCO Electric Bikes - Ride The Planet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>