LUXUL ABR-5000 Epic 5 Gigabit Router User Guide
- June 12, 2024
- LUXUL
Table of Contents
LUXUL ABR-5000 Epic 5 Gigabit Router
Product Information
The product is a network solution guide that provides assistance in designing and setting up a network. It includes various components such as a gigabit wired router, a managed switch, a modem, security cameras, an intelligent power distribution unit, a wireless controller, and access points.
Here is the list of parts included:
Description | Model # | QTY |
---|---|---|
Epic 5 Gigabit Router – Rear Ports | ABR-5000 | 1 |
AV Series 26 Port/24 PoE+ Gb Managed (250W) | AMS-2624P | 1 |
Eight Outlet Intelligent PDU | RLNK-915R | 1 |
Wireless Controller, Managed up to 32 APs | XWC-2000 | 1 |
High Power Wireless AC1200 Dual Band Outdoor WAP | XAP-1440 | 3* |
High Power Wave 2 AC3100 Dual-Band WAP | XAP-1610 | 5* |
- The number of WAPs (Wireless Access Points) may vary depending on building materials and the overall space of the project.
- For more information and pricing, you can visit the product links provided or download the Bill of Materials (BOM).
Product Usage Instructions
To set up the network using the provided components, follow these steps:
- Start by connecting the Internet Service Provider modem to the Gigabit Wired Router using an Ethernet cable.
- Connect the Gigabit Wired Router to the 26-Port Managed Switch using another Ethernet cable.
- Plug in the Security Cameras to the appropriate ports on the Managed Switch.
- Connect the Eight Outlet Intelligent Power Distribution Unit to a power source and plug in any necessary devices.
- Set up the Wireless Controller by connecting it to the Managed Switch using an Ethernet cable.
- Depending on your project requirements, install the High Power Wireless AC1200 Dual Band Outdoor WAP and/or the High Power Wave 2 AC3100 Dual-Band WAP in suitable locations. The number of WAPs needed will vary based on building materials and space.
Once all the components are properly connected and installed, your network
should be ready for use.
If you need further assistance or have any questions, you can contact Luxul’s
customer support at 800.572.2011 or
av.luxul.techsupport@legrand.com.
Typical Network Topology
- Ethernet / Max Dist. 328’ (100m)
- Cat5e or better – recommended (Cat6a required for full Gigabit at 100m)
- Shielded cable on runs over 100’ (30.5m) – recommended
- 10/100/1000 Mbps
- Typical Network Speed – 1 GHz
- VLAN 1 – Management/Main
- VLAN 2 – Guest, QoS-Bulk
- VLAN 3 – PoS, QoS-Priority
- VLAN 4 – Security
Need help to design a network for your install
TAKE ADVANTAGE OF OUR FREE NETWORK DESIGN SERVICES!
Parts List
Description | Model # | QTY |
---|---|---|
Epic 5 Gigabit Router – Rear Ports | ABR-5000 | 1 |
AV Series 26 Port/24 PoE+ Gb Managed (250W) | AMS-2624P | 1 |
Eight Outlet Intelligent PDU | RLNK-915R | 1 |
Wireless Controller, Managed up to 32 APs | XWC-2000 | 1 |
High Power Wireless AC1200 Dual Band Outdoor WAP | XAP-1440 | 3* |
High Power Wave 2 AC3100 Dual-Band WAP | XAP-1610 | 5* |
Download the BOM
PRODUCT LINKS | PRICING
- LUXUL | legrandav.com
- NORTH AMERICA 800.572.2011 av.luxul.techsupport@legrand.com
- ©2023 Legrand AV Inc. 220763 Rev A 1/23 Luxul is a registered trademark of Legrand AV Inc.
- All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
- All patents are protected under existing designations. Other patents pending.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>