RowenTa DX1635 Effective Steam Iron Instruction Manual

: June 12, 2024
: Rowenta

Table of Contents

SAFETY INSTRUCTIONS
FIRST USE
WATER TANK FILLING
SETTING THE TEMPERATURE
DRY IRONING*
SHOT OF STEAM *
SPRAY *
VERTICAL STEAM (•••) *
IRON STORAGE *
SELF-CLEANING (EVERY 2 WEEKS) *
SOLEPLATE CLEANING *
For your safety
What water to use?
Types of water not to use?
If there is a problem?
Environment
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RowenTa DX1635 Effective Steam Iron

RowenTa DX1635 Effective Steam Iron

SAFETY INSTRUCTIONS

Safety Instructions

depending ending on model

FIRST USE

First Use

First use

WATER TANK FILLING

Water Tank Filling

Water tank filling

SETTING THE TEMPERATURE

Ironing label

| Fabric| Temperature Control
---|---|---
|

NYLON

|

•

|

LAINE

|

••

| LIN|

•••

Setting the temperature

DRY IRONING*

Dry Ironing*

Dry ironing

SHOT OF STEAM *

Shot Of Steam *

Shot of steam

SPRAY *

Spray *

Spray

VERTICAL STEAM (•••) *

$Vertical Steam $•••$ *$

Vertical steam •

IRON STORAGE *

Iron Storage *

Iron storage

SELF-CLEANING (EVERY 2 WEEKS) *

$Self-cleaning $Every 2 Weeks$ *$
$Self-cleaning $Every 2 Weeks$ *$
$Self-cleaning $Every 2 Weeks$ *$

CLEAN (every 2 weeks

SOLEPLATE CLEANING *

Soleplate Cleaning *

Soleplate cleaning

For your safety

This appliance complies with the technical rules and standards for safety currently in force (Electromagnetic Compatibility, Low Voltage, Environment).

Please read these instructions carefully and keep them for future reference.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children must be supervised to ensure that they do not play with the appliance.
Warning! The voltage of your electrical installation must correspond to that of the iron (220V-240V). Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee.
This iron must always be plugged into an earthed socket. If using a mains extension lead, ensure that it is correctly rated, with an earth connection.
If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger.
The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or has functional anomalies. Never dismantle your appliance: have it inspected by an Approved Service Centre, so as to avoid any danger.
Never immerse your iron in water!
Do not unplug your appliance by pulling on the cord. Always unplug your appliance: before filling or rinsing the reservoir, before cleaning it, after each use.
Never leave the appliance unattended when it is connected to a power source or if it has not cooled down for approximately 1 hour.
Your appliance gives off steam, which may cause burns. Take extra care especially when you are ironing close to the edge or on a corner of your ironing board. Never direct the steam towards people or animals.
Your iron should be used and placed on a flat, stable, heat-resistant surface. When you put your iron onto its iron rest, make sure that the surface on which you put it is stable.
This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.

What water to use?

Your appliance has been designed to function with untreated tap water. If your water is very hard (check with your local water authority), it is possible to mix untreated tap water with store-bought distilled or demineralised water in the following proportions: – 50% tap water, – 50% distilled or demineralised water.

However, it is necessary to operate the Self-Clean function regularly in order to eliminate hard water deposits from the steam chamber. Use the self- clean function approximately every 2 weeks. If the water is very hard clean the iron weekly

Types of water not to use?

Heat concentrates the elements contained in water during evaporation. The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining, or premature wear of the appliance: water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your Rowenta iron. Also do not use boiled, filtered or bottled water.

If there is a problem?

PROB LEM| POSSIBLE CAUSE|

SOL U TION

---|---|---
Water drips from the holes in the soleplate.| You are using steam while the iron is not hot enough.| Wait until the thermostat light goes out.
You are using the shot of steam button too often.| Wait a few seconds between each use of the button.
You have stored the iron horizontally, without emptying it and without setting it to .| See the section “Storing your iron”.
Brown streaks come through the holes in the soleplate and stain the linen.| You are using chemical descaling agents.| Do not add any descaling agents to the water in the water tank.
You are not using the right type of water.| Perform a self-cleaning operation and consult the chapter “What water should I use?”.
Your linen has not been rinsed sufficiently or you have ironed a new garment before washing it.| Make sure that your laundry is rinsed sufficiently in order to remove any deposits of soap or chemical products on new clothes..
The soleplate is dirty or brown and can stain the linen.| Your are ironing with an inappropriate temperature selection (temperature too high).| Clean the soleplate as indicated above. Select the appropriate program.
You are using starch.| Clean the soleplate as indicated above. Always spray starch onto the reverse side of the fabric to be ironed.
There is little or no steam.| The water tank is empty.| Fill the water tank.
Your iron has been used dry for too long.| Carry out a self-clean.
The soleplate is scratched or damaged.| You have placed your iron flat on a metallic rest-plate or ironed over a zip.| Always set your iron on its heel. Do not iron over zips.
Steam or water come from the iron as you finish filling the tank.| The steam control is not set to the DRY position.| Check that the steam control is set to the DRY position.
The water tank is overfilled.| Never exceed the Max level.
The spray does not spray.| The water tank is not filled enough.| Fill up the water tank