SwitchBot W3202100 Hub 2 Thermometer Hygrometer User Manual
- June 12, 2024
- SwitchBot
Table of Contents
HUB 2
User Manual
Package Contents
List of Components
Preparation
You will need:
- A smartphone or tablet using Bluetooth 4.2 or later.
- The latest version of our app, downloadable via the Apple App Store or Google Play Store.
- A SwitchBot account, you can register via our app or sign in to your account directly if you already have one. https://apps.apple.com/cn/app/switchbot/id1087374760
iOS 11.0+
https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
Android OS 5.0+
Add Hub 2 to the SwitchBot app
Open our app and sign in to your account. Tap “+” at the top right of the home
page, find the Hub 2 icon and select, then follow the instructions to add your
device.
Safety Information
- Keep this product away from heat and humidity, and make sure it does not come into contact with fire or water.
- Do not operate this product with wet hands.
- This product is a precision-based electronic product, please avoid physical damage.
- Do not attempt to disassemble, repair, or modify the product.
- Do not use the product where wireless devices are not allowed.
Installation
Infrared Emission Range
Test subject: SwitchBot LED Strip Light
Infrared Receiving Range
Test subject: SwitchBot Ceiling Light and its remote control
Placement Tips
- As shown above, make sure your appliance to be controlled is within Hub 2’s infrared emission range.
- Since the infrared signal can be blocked by walls and other physical objects, make sure there are no obstacles between Hub 2 and your appliance.
- Make sure your appliance works well and is at an appropriate angle to your Hub 2.
- For better Internet connection strength, please place Hub 2 near your router.
Option 1: Place your Hub 2 on a horizontal surface
Outstretch the stand on the back of your Hub 2 and place it on a horizontal
surface like a table or a shelf. Pull straight the cable when it goes through
the hole on the stand, so that the cable does not affect your Hub 2’s stable
standing.
Option 2: Attach your Hub onto a wall with the adhesive tape
Step 1: Stick the adhesive tape to the back of your Hub 2.
Step 2: Find a good position and attach your Hub 2 there.
Find a suitable position and test whether your Hub 2 works well with your
appliance in this position. If everything works well, clean the surface and
stick your Hub 2 there. Then press it for about 30 seconds to ensure it is
securely attached. The adhesive tape can stick better to smooth door surfaces,
glass and ceramic tiles.
Removing Hub 2
Note: Avoid grabbing and pulling your Hub 2 directly from the wall, this
may cause damage to it or your wall surface.
Hold your Hub 2, turn it clockwise or counterclockwise and gradually increase
force until it detaches from the wall.
Precautions
- Use only 5 V 2 A power adaptor to connect your Hub 2. Other types of adaptors may damage or affect normal functioning.
- Do not use adaptors that have no safety certifications.
- The temperature and humidity sensor is on the cable that we provide. If you use a normal cable to connect your Hub 2, it will not show temperature and humidity readings on its display.
- Do not outstretch your Hub 2’s stand with too much force, or the stand may break.
- Use only Type-C cable to connect your Hub 2 to a power supply.
- Avoid stretching or pulling the cable, this may affect the temperature and humidity sensor’s data transmission.
Device Status Description
Adding Device
| Device Status | Description |
|---|---|
| Indicator light flashes rapidly. | In pairing mode. |
| Indicator light flashes slowly. | Connecting to the Internet. |
| Indicator light stays lit up. | Working normally. |
| Indicator light flashes once. | Remote control added or your SwitchBot |
Bluetooth device is operated via the app once.
Upgrading Firmware
| Device Status | Description |
|---|
Indicator light starts flashing slowly and other lights on the display go
off.| Upgrading firmware.
The display lights up and indicator light flashes slowly.| Firmware upgraded
successfully.
The display and indicator light both stay lit up.| Connected to the Internet.
Learning Remote Control
| Device Status | Description |
|---|
Indicator light lights up for 2 seconds then goes off, then flashes once after
you press your remote control.| Learning remote control.
Indicator light flashes once after 10 seconds after the status above.|
Operation timeout. Failed to learn remote control.
Temperature and Humidity Alerts
Device Status| Buzzer beeps continuously. Temperature and humidity
readings and button lights flash constantly.
---|---
Description| Temperature or humidity reading reaches its set value.
What to Do| Press any button on your Hub 2 to lift the alert or wait for
30 seconds for the alert to go off itself.
Please visit support.switch-bot.com for detailed information.
Troubleshooting
If you have difficulty configuring Wi-Fi for your Hub 2, please scan the QR
code below for solutions.
https://support.switch-bot.com/hc/en-us/articles/8071641642135
https://support.switch-bot.com/hc/en-
us/articles/8071641642135
If you have difficulty adding remote controls to your Hub 2, please scan the
QR code below for solutions.
https://support.switch-bot.com/hc/en-us/articles/8069379964695
https://support.switch-bot.com/hc/en-us/articles/8069379964695
If your Hub 2 shows faulty temperature or humidity readings, please scan the
QR code below for solutions.
https://support.switch-bot.com/hc/en-us/articles/9747052703895
https://support.switch-bot.com/hc
/en-us/articles/9747052703895
Resetting Factory Settings
Touch and hold the two touch buttons located on the device. After 2 seconds, the indicator light will start flashing and then turn off after another 13 seconds. Now release the buttons, the indicator light will light up then turn off. Your Hub 2 has now been reset to factory settings.
Firmware Upgrades
In order to improve user experience, we will regularly release firmware updates to introduce new functions and solve any software defects that may occur during usage. When a new firmware version is available, we will send an upgrade notification to your account via our app. When upgrading, please make sure your product is powered on and make sure your smartphone is within range to prevent interference.
Specifications
Hub 2
Model: W3202100 Color: White Material: ABS
Size: 80 × 70 × 23 mm (3.1 × 2.8 × 0.9 in.) Weight: 63 g (2.2 oz.)
Power: 5 V 2 A
Operating Temperature: −20 °C to 40 ºC (−4 ºF to 104 ºF)
Operating Humidity: 0 % to 90 % RH
Network Connectivity: 802.11 b/g/n, 2.4 GHz Wi-Fi, Bluetooth
Low Energy
System Requirements: iOS 11.0+, Android OS 5.0+
Temperature and Humidity Sensor
Resolution: 0.1 ℃ / 0.1 ℉, 1 % RH
Temperature Range: 20 ℃ to 80 ℃ ( 4 ℉ to 176 ℉)
Humidity Range: 0 to 99 % RH
Temperature Accuracy: 20 ℃ to 0 ℃ ( 4 °F to 32 °F) [±0.4 ℃ / 0.7 ℉] 0 °C to 65
°C (32 °F to 149 °F) [±0.2 °C / 0.4 °F] 65 °C to 80 °C (149 °F to 176 °F)
[±0.3 °C / 0.5 °F] (Temperature unit can be changed in the app.)
Humidity Accuracy:
0 to 10 % RH (±3 % RH)
10 % to 90 % RH (±2 % RH)
90 % to 99 % RH (±3 % RH)
Warranty
We warrant to the original owner of the product that the product will be free from defects in materials and workmanship. Please note that this limited warranty does not cover:
- Products submitted beyond the original limited warranty period.
- Products on which repairs or modifying have been attempted.
- Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications.
- Damage due to natural disaster (including but not limited to lightning, flood, tornado, earthquake, or hurricane, etc.).
- Damage due to misuse, abuse, negligence or casualty (e.g. fire).
- Other damage that is not attributable to defects in the manufacture of product materials.
- Products purchased from unauthorized resellers.
- Consumable parts (including but not limited to batteries).
- Natural wear of the product.
Contact & Support
Setup and Troubleshooting: support.switch-bot.com
Support Email:
support@wondertechlabs.com
Feedback: If you have any concerns or problems when using our products, please
send feedback via our app through the Profile > Feedback page.
CE/UKCA Warning
To comply with RF exposure requirements, a minimum separation distance of 20
cm must be maintained between the user’s body and the device, including the
antenna. Use only the supplied or an approved antenna. This device is in
compliance with the essential requirements and other relevant provisions of
directive 2014/53/EU. All essential radio test suites have been carried out.
CE DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd. declares that the radio equipment
type W3202100 is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following
internet address: support.switch-bot.com
UKCA DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd. declares that the radio equipment
type W3202100 is in compliance with UK Radio Equipment Regulations (SI
2017/1206). The full text of the UK declaration of conformity is available at
the following internet address: support.switch-bot.com
This product can be used in EU member states and UK.
Manufacturer: Woan Technology (Shenzhen) Co., Ltd.
Address: Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu
Community, Xixiang Subdistrict, Bao’an District, Shenzhen, Guangdong,
P.R.China, 518100
Operation frequency (Max power)
Wi-Fi: 2412 MHz to 2472 MHz (19.8 dBm)
BLE: 2402 MHz to 2480 MHz (2.0 dBm)
Operation temperature: −20 °C to 40 °C
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
IC Warning
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with the limits of exposure to IC radiation defined
for an uncontrolled environment.
www.switch-bot.com
V1.0-2212
Documents / Resources
|
SwitchBot W3202100 Hub 2 Thermometer
Hygrometer
[pdf] User Manual
W3202100, 2AKXB-W3202100, 2AKXBW3202100, Hub 2, Thermometer Hygrometer, Hub 2
Thermometer Hygrometer, W3202100 Hub 2 Thermometer Hygrometer, Thermometer,
Hygrometer
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>