Shenzhen Guangsu Shidai Technology Co GS8 Ultra Smart Watch User Manual

Shenzhen Guangsu Shidai Technology Co GS8 Ultra Smart Watch

Product Information

• This device is designed to comply with part 15 of the FCC Rules, ensuring that it operates within the legal limits for electromagnetic interference. It is important to note the following conditions:
• • This device must not cause harmful interference.
    • This device must accept any interference it receives, even if it results in undesired operation.
• Modifications or changes to the device that are not explicitly approved by the responsible party for compliance may void the user’s authority to operate the equipment.
• The device has been evaluated and meets the general RF (Radio Frequency) exposure requirement. This means it can be used in portable exposure without any restrictions.

Product Usage Instructions

When using this device, please keep the following guidelines in mind:

1. Ensure that the device does not cause any harmful interference to other electronic devices or systems.
2. If you experience interference from other sources, be aware that the device is designed to accept such interference without affecting its operation.
3. Do not make any modifications or changes to the device that have not been expressly approved by the responsible party for compliance.
4. It is important to adhere to the general RF exposure requirement when using the device in a portable manner. This means there are no restrictions on using the device in terms of RF exposure.
   Please consult the full user manual for further details and specific instructions regarding the operation and usage of this device.

Product description

• Packing list: watch host (including strap) x 1,
• wireless charger x 1,
• product manual x 1

SETTING UP

1. Open the packaging. Follow the steps to connect the strap to the smartwatch
2. Wear the smart watch and press and hold the button to turn it on
3. Open Wearfit Pro on your phone to set up the device
4. To charge, place the back of the watch on the wireless charger

Product overview

Buttons and Touch

Watch operating instructions

• Button definition:
  Long press for 3s to prompt Iha interface (shutdown, restart, SOS), such as long press to axil power saving mode in power saving mode, and long press to axil leek scr-, mode in lock screen mode;

  • short press on the dial page to enter the menu, double click to anterAlipay;
  • on the menu page, short press to return to the dial, and double press to switch the menu;
  • Short press to tum on the screen when the saean is off;

• Knob button

  • All up and down sliding can be achieved by rotating the knob;
  • All left and right sliding can be achieved by rotating the knob;
  • Rotate on the dial page to switch dials, and preset more than ten kinds of exquisite dials.
  • on the cellular menu page, you can directly zoom in or zoom out the center app icon by rotating the kno5, and open Iha app when it is maximized.

• Watch face home page touch gestures:

  • Right swipe split screen function: swipe right on the dial page to appear, and swipe leffto return.
  • Swipe left to enter smart components: The system presets 3 componentshclick *Add component” at the far riQht to add components, up to 5 more, long press t e component to enter the Delete component” page.
  • swipe shortcut button: swipe down on the watch face page to appear, swipe up to return.
  • Swipe up on Ihe message interface: Swipe up on the dial page to appear, save up to 6 messages, and swipe to return.short press on other pages to return to the previous page.

Connect Watch

1. Download the “Wearftt Pro” APP to your mobile phone and Install It, you can search directly in the APP store “Wearfit Pro” to download. you can also scan the above QR code to jump lo the link to download (browser, WeChat, etc. can be scanned)

2. Connect the watch

3. Scan code connection: After the watch is turned on, enter the watch face page, swipe right to enter the splltscreen function, and click “Scan the code to connect” shortcut button. the connection QR code will pop up, end you can scan the code directly in Wearfit connect.

4. Manual connection:
   After the mobile phone turns on Bluetooth, enter the APP to directly search for the device for manual connection.

5. Connect to call bluetooth

  * In the initial state of the watch, the call Bluetooth la turned afl’, and the call function and music function cannot be used at this time. CIick the call Bluetooth switch,8 after turning it on, you can find the call Bluetooth in the mobile phone system (when the mobile phone bluatooth ia turned on), find the corresponding Bluetooth name (the default la Watch call), and click connect.
  * After the connection Is successful, the call funcllon and music function can be used.

Features

Charge

• Please place the back of the watch on the surface of the wireless charger to start charging, the watch
• The charging indicator is displayed on the screen.

Note

1. Do not charge in a humid and watery environment;
2. Please ensure that the back of the watch is in clean and complete contact with the surface of the wire less charger;
3. Please use a clean flannel to clean the back of the watch and the surface of the wireless charger regularly. Make sure that the watch and the wireless charger surface are in full contact to ensure normal charging;
4. This product is not equipped with a power adapter. In order to ensure the safety offamily and property, when charging, You can use the USB interface or choose a power adapter whose output does not exceed 5V/1A. Please purchase power adapters through regular channels, and avoid using inferior or fake power adapters to avoid bursting or fire.

Bluetooth data transmission

When connected to a mobile phone, the watch will instantly synchronize some data with the mobile phone via Bluetooth, including weather, notification messages, sports health data, etc. This data will not be synced when the connection is dropped or Bluetooth is turned off.

Precautions

1. The measurement results of this product are for reference only, not for any medical purpose or basis. please follow Under the guidance of a doctor, do not self-diagnose and treat according to the treatment results.
2. The waterproof level of this product is IP68, and it cannot be used for deep diving or soaking in water for a long time.In addition, this product does not put hot water, because water vapor will affect the watch.
3. he company reserves the right to modify the contents of this manual without prior notice. Some functions are different in the corresponding software version, which is normal.

Basic parameters

• Product name: Smart Watch
• Body material: zinc alloy+ IML injection molding process
• Strap material: liquid siliconeStrap material: liquid silicone
• Bluetooth version: Bluetooth 5.2
• Device  requirements: Android 5.0 or ios 10.0 and above

FCC Statement

• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>