KINLAN BE1039 True Wireless Earbuds User Guide
- June 12, 2024
- KINLAN
Table of Contents
True Wireless Earbuds
User’s Guide for Model BE1039
Features
- Bluetooth v5.3: range approximately 60ft.
- IPX7 Waterproof protection
- Built-in microphone
- Handsfree calling
- Rechargeable battery: up to 7 hours at 50% volume
Controls and Functions
Includes
- Wireless earbuds
- Charging case
- Ear tips (small, medium, and large)
- USB-C charging cable
- User manual
Multi-Function Button
Note: The Function Touch Pad is sensitive and must be touched or tapped
to operate properly.
General
Tap and hold for 3 seconds o power ON
Tap and hold for 5 seconds to power OFF.
Phone Calls
Tap to answer/end phone calls.
Tap and hold for 2 seconds to reject ncoming calls.
Voice Assist
Tap and hold for 2 seconds to activate Voice Assistant (LEFT).
Music
Tapto lay/pause music
Tap twice to skip to next track (RIGHT).
Tap twice toply previous tracks (LEFT).
Tap 3 times totum volume up (RIGHT).
Tap 3 times totum volume down (LEFT).
Charging the Case
‘The earbuds have a total battery life of approximately 7 hours at 50% volume.
To charge the case, use the USB-C to USB cable (included), to connect to the
USB port of a powered-on computer or a UL certified USB power adaptor (not
included). When the case is charging the Power Indicator LED willlight up. The
total charge time for the case is approximately 2 hours.
Charging the Earbuds
- Open the cover and place the earbuds on the charging contacts. Be sure to match the left and right earbuds. with the correct docking station in the case. Earbud Indicator LED wil turn red when charging. When fully charged, the LEDs will turn off. Cherging time for the earbuds s approximately 2 hours.
Pairing Bluetooth
Note: When earbuds are powered on, they automatically link and enter
pairing mode. You can power on a single.
earbud to use as a single unit f you wish.
- With the earbuds powered on, you can now connect to your Bluetooth device. The LED indicator on the earbuds will flash red and blue, indicating it i readly to pair to a Bluetooth device.
- On your Bluetooth device, search for nearby devices in your Bluetooth settings and select BE1039. When successfully connected to your Bluetooth device, a voice prompt will announce the Bluetooth connection.
- Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.
PLEASE NOTE: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4Ghz. bands or in high wireless traffic areas.
Reconnect Bluetooth
If you have trouble connecting the earbuds and your device or if the earbuds
become unpaired, do the following:
- Delete BE1039 from your st of devices in your Bluetooth settings
Press and hold the Multi-Function Button for 5 seconds to turn the earbuds off. Press and hold the Multi-Function button for another 3 seconds to turn the earbuds back on,
Return the earbuds to the case. Remove them and allow them to automatically enter pairing mode. Connect to your Bluetooth device using the steps above.
FCCWarning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1:This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
Theselimits are designed to provide reasonable protection against
hamfulinterference n a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
notinstalled and used in accordance with the instructions, may cause hamful
interference to radio communications. However, there is no guarantee that
interference will not occur ina
particular installation. If this equipment does cause hamfulinterference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
~Reorientor relocate the receiving antenna,
~Increase the separation between the equipment and receiver.
~Connect the equipmentintoan outleton a circuit different from that to which
the receiver is connected.
~Consult the dealer oran experienced radio/TV technician forhelp.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’sauthority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable ‘exposure condition without resriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>