Rebel NAR0465-2 Magnifier Lamp User Manual

: June 4, 2024
: Rebel

Table of Contents

Rebel NAR0465-2 Magnifier Lamp
SAFETY INSTRUCTIONS
INSTALLATION
OPERATION
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rebel NAR0465-2 Magnifier Lamp

SAFETY INSTRUCTIONS

Read the instruction manual carefully before first use and keep it for future reference. Producer is not responsible for damages caused by inappropriate handling and use of the device.

Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
Protect power cord from sharp edges and other factors which could lead to their damage.
The power mains socket must be located near to the device and be easily accessible.
Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
If the device is not being used, disconnect it from power supply.
When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
Do not handle the device with wet hands.
Always cover the lens with the hinged lid when not in use. Otherwise there is a risk of fire during direct sunlight since the lens acts like a burning glass.
Do not touch the lens with with sharp or pointed objects.
Do not look directly into the light beam!
Never point the beam of light at persons or animals!
Never point the beam of light at mirrors or other reflective surfaces.
Do not attach any objects (e.g. decorative material) to the device.
The device is suitable for indoor use only.
Use only authorized accessories.
Do not use the product for purposes different from displayed in this operating manual.
Do not use the device if it is damaged.
Do not attempt to repair this device yourself. In case of damage, contact with authorized service point for check-up or repair.
This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.
Fixed power cable may only be replaced in an authorized service point.
ALWAYS disconnect the device from the power source before cleaning.
Clean this device with soft, dry cloth. Do not use any abrasives or chemical agents to clean this product.

INSTALLATION

Attach the vise to the tabletop in such a way that the table touches the inner part of the vise.
Tighten the clamping screw firmly until the vise sits properly and cannot be moved.
Insert the foot of the lamp arm into the opening in the vise.

OPERATION

Connect the plug of power cord into the power mains socket.
Open the lamp lid.
Set the lamp switch to I position to turn on the light.
Position the arm according to your preferences.
Set the tilt angle of the lamp head with a screw on the end part of the arm.
When you finish using the device, set the lamp switch to 0 position and close the lid.

SPECIFICATION

Lens: glass
Lens size: 5”
Optical power: 5 dioptres
Light source: 60x 2835 SMD
Luminous flux: 730 lm
Color temperature: 6500 K
Efficiency: 90 lm/W
Power: 10 W
Adjustable swing arm for easy positioning
Heavy duty metal G-clamp
Mounting: to the table
Color: white
Lifespan: 20 000 h
Humidity: =< 95%
Power supply: AC 220 – 240 V; 50 Hz
For indoor use only
Can be mounted on a tabletop with thickness of 1,25 – 6,25 cm (0,5” – 2,5”)

It is forbidden to place equipment waste marked with the symbol of a crossed- out trash bin together with other waste. This equipment is subject to collection and recycling. The harmful substances it contains can cause environmental pollution and pose a threat to human health. Made in China for LECHPOL ELECTRONICS Sp.